Dynamic Cantilever Ladder
Closed Special Notice Posted
- Solicitation number
- W912HZ24Q0023
- Agency
- Engineer Research and Development Center US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332999 All Other Miscellaneous Fabricated Metal Product Manufacturing
- Place of performance
- Vicksburg, Mississippi 39180, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This Special Notice was published by the US Army Corps of Engineers, Engineer Research and Development Center regarding a sole source contract opportunity. The notice seeks to award a firm fixed price contract to Industrial Products Limited, L.L.C. for the procurement of a Dynamic Cantilever Ladder to access a larger than commercial size tank.
The ladder must allow for observation from above and access inside the tank from ladders on each side of the platform. Due to these custom requirements, the designs provided by Industrial Products Limited are proprietary and cannot be replicated. Interested parties may submit capability statements by March 15th demonstrating relevant experience and references for consideration, however a competitive solicitation will not be issued as this is a sole source requirement. Responses should be emailed to the point of contact provided, with the notice ID in the subject for consideration of whether competition is appropriate for this requirement which is within the government's discretion.
Notice text
The US Army Corps of Engineers, Engineer Research and Development Center (ERDC), Vicksburg, MS, intends to award a Sole Source Firm Fixed Price contract to Industrial Products Limited, L.L.C. Jefferson, Louisiana for the procurement of a Dynamic Cantilever Ladder. The minimum needs for this contract are as follows: Safe-T-Fab SFP 23407-Dynamic Cantilever with the following features, Steel main stair – yellow finish, aluminum flip down platform – mill finish (stainless Steel), 30” wide grip strut steps & platform, 60” deep platform, 1.5” OD tubing rails, 92” platform height – (~87” clearance height), 45” clearance width, 3.5” OD closed cell urethane bumper material to protect part, 5X2 dual locking swivel casters w/ elastomer wheel at front (2), 5X2 rigid casters w/ elastomer wheel at rear (2), approximately 240 lbs of bolt counterweight on base, hand winch w/ automatic brake & 2” web belt strap to raise/lower unit, 300 max capacity on end strip of flip down (~400 before tipping), ships “knocked down” (back, bottom, & support brace to bolt in place upon receipt), and stainless custom cantilever stair. The size of the tank the ladder is required to access is larger than any commercial off the shelf ladder can provide. The needs of the project require a ladder capable of allowing observation from above as well as access to the inside of the tank by means of a ladder on each side of the platform. Due to the requirements for this supply a custom design is required, the custom designs provided by Industrial Products Limited LLC are proprietary and cannot be replicated or shared to be replicated by another company.
This notice is not a request for competitive quotes or proposals. A solicitation will not be issued. However, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The information submitted must be provided in sufficient detail to demonstrate the vendor's ability to fulfill this requirement. The contractor must also provide a description of their past experience in fulfilling requirements which are the same or similar to this requirement and references for each. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this requirement on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. Responses to this requirement may be submitted to David Ammermann at david.g.ammermann@usace.army.mil. The Notice ID shall be included in the subject line of the e-mail submission. Responses must be received no later than 5 days from the posted date of this notice.
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity