Dust Collector

The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 333413 Industrial and Commercial Fan and Blower and Air Purification Equipment. This requirement will be set aside as a 100% Small Business concern.

The Contract Line Items (CLINs) are as follows.

0001 1 Each

N4215811600167

FFP

DUST COLLECTOR

1. SPECIFICATIONS:

1.1. SCOPE: Procurement for one each (1 ea) Dust Collector for Norfolk Naval

Shipyard Cold Spray

Section.

2. EQUIPMENT DESCRIPTION: The equipment shall consist of one each Dust

Collector.

2.1. SALIENT CHARCTERISTICS: Dust Collector shall have the following

salient characteristics

(minimum).

2.1.1. Design/ Construction:

2.1.1.1. Machine shall be equipped with reinforced housing construction.

2.1.1.2. Machine shall be equipped with low-inlet drop-out box.

2.1.1.3. Machine shall be equipped with inline spark cooler.

2.1.1.4. Machine shall be equipped with composite-style explosion relief panels.

2.1.1.5. Machine shall be equipped with fire and explosion suppression.

2.1.1.6. Machine shall be equipped with heat sensors.

2.1.1.7. Machine shall be equipped with alarm strobes.

2.1.1.8. Machine shall be equipped with downward airflow advantage.

2.1.1.9. Machine shall be equipped with easy filter access.

2.1.1.10. Machine shall be equipped with access door with T-handle compression

latches.

2.1.1.11. Machine shall be equipped with filter cradles with rotary filter locks.

2.1.1.12. Machine shall be equipped with zero-turn power pulse cleaning system.

2.1.1.13. Machine shall be equipped with sprinkler couplings.

2.1.1.14. Machine shall be equipped with built-in exhaust silencer.

2.1.1.15. Machine shall be equipped with built-in damper valve.

2.1.1.16. Machine shall be equipped with top exhaust outlet with weather hood.

2.1.1.17. Machine shall be equipped with a standard top with an inlet diameter of

12".

2.1.1.18. Machine shall be equipped with explosion venting.

2.1.1.19. Machine shall be equipped with 17 gallon dust container hopper

discharge.

2.1.1.20. Machine shall be equipped with Powercore Ultra-Web FR filter packs or

equivalent.

2.1.1.21. Machine shall be equipped with a N EMA 4, 5 HP electrical control panel

with

shutdown for electrically powered equipment.

2.1.1.22. Machine shall be equipped with NEMA premium, 5 HP aluminum wheel

integrated power packs.

2.1.1.23. Machine shall be received fully assembled and pre-wired.

2.1.1.24. Machine shall be built to NFPA 79 to accept 480 VAC, 3 phase, 60 Hz.

2.1.2. Flameless Venting:

2.1.2.1. Shall be located on the side of the machine.

2.1.2.2. Shall be outdoor duty.

2.1.2.3. Shall be equipped with a burst indicator.

2.1.2.4. Shall be capable of 5 psi pressure reading of the vessel.

2.1.3. Operating Conditions:

2.1.3.1. Power: 7.5 HP

2.1.3.2. STD Housing Rating: 12"

2.1.3.3.

2.1.3.4.

2.1.3.5.

Reinforced Housing Rating: 2.1 psi

Wind Load Rating: 90 mph

Compressed Air Required: 90-100 psi

2.1.3.6. Operating Temperature: 150 °F

2.1.4. Capacity:

2.1.4.1. Nominal Airflow Range: 2000 - 4800 cfm

2.1.4.2. No. of Filter Packs: 4

2.1.4.3. Filter Area: 588 ft2

2.1.4.4.

2.1.4.5.

No. of Valves: 4

Dimensions: 82" L x 47" W x 86" H

3. TECHNICAL MANUALS: Three (3) complete sets of technical manuals

covering operation, service

and maintenance, and part-listing shall be provided.

4. QUALITY ASSURANCE PROVISIONS: Inspection and acceptance of the

supplies, performed at

destination by Code 983 and shall consist of type and kind; condition; operability,

if readily

determinable; preservation; packaging.

5. PRESERVATION, PACKAGING AND PACKING: The equipment shall be

packaged, packed and

preserved for shipment to reach ultimate destination undamaged. Package shall be

prominently

marked "NOT FOR OUTSIDE STORAGE". Yellow packaging, packing,

preservation and marking are

prohibited.

6. ADDITIONAL REQUIREMENTS:

6.1. Additional Accessories:

6.1.1. lsoflap:

6.1.1.1. Shall be 12" in size.

6.1.1.2. Shall include module and cables.

6.1.1.3. Shall be designed with inlet duct mechanical isolation.

6.2. Machine Hardware: Machine shall include any necessary lifting, leveling, and

floor attachment

hardware for machine installation.

6.3. Nameplate: A nameplate shall be permanently and securely attached to each

machine, the

information provided on the plate shall be as listed below.

a) Nomenclature

b) Manufacturer's name

c) Manufacturer's model designation

d) Manufacturer's serial number

e) Power input (volts, total amps, phase, frequency)

f) Amp rating of largest motor

g) Short circuit/over-current protection rating

SPMYM121Q0088

Page 6 of 45

h) Contract Number or Order Number

i) National Stock Number or Plant Equipment Code

j) Date of manufacture

6.4. Operating and Maintenance Manual: Machine shall be provided with operating

and

Maintenance Manual (O&M), Electrical Manual, Mechanical Manual &

Schematics three (3) each

shall be provided with the machine and one (1) each searchable electronic copy

(PDF) shall be

E-mailed TPOC.

6.5. Verification Test: After delivery the contractor shall test run each machine at

the site to ensure

conformance with this purchase description.

6.6. Warranty: This machine shall be warranted against any defects in material,

parts, and

workmanship for 12 months after the date of installation.

7. TECHNICAL POINT OF CONTACT:

Russell Harris Ph: 757-636-4908 Email: russell.r.harris@navy.mil

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation are applicable for this line item. The contractor shall provide DoD

unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N4215811600167

PURCHASE REQUEST NUMBER: N4215811600167

PROJECT: YY9

PSC CD: 44603

This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM121Q0088 and it is expected to be posted on or about 27 July 2021 and posted in SAM, https://.sam.gov/. Quotes will be due by 4:00 pm EST on 04 August, 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM121Q0088) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues.

Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://.sam.gov/

By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.