Duplex Corrosion Resistant Steel
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N68335-25-R-0509
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332111 Iron and Steel Forging
- PSC
- 9510 Bars And Rods
- Place of performance
- Lakehurst, New Jersey, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Air Systems Command Naval Air Warfare Center is procuring Duplex Corrosion Resistant Steel raw material to support CVN75 Catapult Trough Components for the Prototype, Manufacturing, and Test Division. The procurement specifically requires UNS S32550 Ferralium 255 steel that must meet stringent technical specifications including ASTM-A-240 or ASTM-A-479 standards, water quenching after annealing, and Charpy V-notch impact testing with minimum 25 FT-LBS at -20 degrees F. This is a firm-fixed-price contract opportunity issued as a Request for Proposal under solicitation number N68335-24-R-0176. The evaluation will be based on two criteria: technical description (ensuring compliance with material specifications, testing requirements, inspection requirements, and Buy American Act compliance) and price reasonableness, with award going to the technically acceptable offeror with the lowest price. Electronic proposals are due by 11:00am EDT on August 12, 2025, to Timothy J. Caracciolo at the specified Navy email address.
This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332111 (Iron and Steel Forging) with a size standard of 750 employees and PSC code 9510 (Bars and Rods). The procurement requires 108 total pieces of steel in three specific dimensions: 27 pieces of 3.25" x 6.25" x 72", 27 pieces of 2.63" x 4.5" x 69.25", and 54 pieces of 2" x 3.38" x 36". The contract will be FOB destination with government inspection and acceptance occurring at the destination point. Performance will take place at Joint Base MDL in Lakehurst, New Jersey. The solicitation includes extensive compliance requirements under both FAR and DFARS clauses, including cybersecurity safeguarding provisions and various representation and certification requirements for contractors.
Notice text
I. Description of Requirement
This procurement is for Duplex Corrosion Resistant Steel Raw Material in support of the Prototype, Manufacturing, and Test Division (PMTD). Please see the attached SOW for the following:
- Line Items, Quantities, and Unit of Measure
- Inspection and Acceptance
- Packaging, Preservation and Shipping
The resultant contract will be a firm-fixed-price contract.
II. Solicitation Instructions. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) This solicitation is issued as a Request for Proposal (RFP) in accordance with FAR Part 12 & FAR Subpart 13.5 under solicitation number N68335-24-R-0176. (iii) The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-01. (iv) This will be Small Business Set-Aside. The associated North American Industrial Classification System (NAICS) code for this procurement is 332111 with a size standard of 750 in number of employees. The Product Service Code is 9510. (v) See attached Statement of Work (SOW) for the list of line items, quantities and units of measure. (vi) The description of the requirements for the items to be acquired are provided in the description above and the attached SOW. (vii) See attached SOW for Date(s) and place(s) of delivery and acceptance. FOB point is destination. Any applicable shipping costs shall be factored into the unit price(s) of each item. Do not include a separate line item for shipping charges. (viii) FAR 52.212-1 Instructions to Offerors--Commercial Products and Commercial Services, is incorporated. (ix) FAR 52.212-2, Evaluation-Commercial Products and Commercial Services is incorporated. (x) This solicitation is open to small businesses.
(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:
Award shall be made to the offeror whose quotation is deemed technically acceptable and is lowest price. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Description; and, 2) Price.
1. Technical Description: The Government will evaluate whether the quoter has included a technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation, including the attached SOW. Quotations that do not include a technical description of the items being offered or do not include a technical description of the items being offered in sufficient detail to evaluation compliance with the requirements in the solicitation, including the attached SOW will not be considered for award.
a.) Proposals that do not conform with the material specification outlined in the SOW will be deemed technically unacceptable.
b.) Proposals that do not conform with designated testing requirements outlined in the SOW will be deemed technically unacceptable.
c.) Proposals that do not conform with designated inspection requirements outlined in the SOW will be deemed technically unacceptable.
d.) Proposals that do not conform with the Buy American Act will be deemed unacceptable.
2. Price: The Government will evaluate price for reasonableness.
(x) Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items with its offer or a statement that its Representations and Certifications was completed in the System for Award Management (SAM).
(xi) FAR 52.212-4, Contract Terms and Conditions - Commercial Items is incorporated. (xii) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders –Commercial Items is incorporated in this contract by full text; the following provisions apply: 52.222-50, Combating Trafficking in Persons (Mar 2015). (xiii) Additional clauses and provisions and requirements:
FAR 52.204-7: System for Award Management
FAR 52.204-13: System for Award Management Maintenance
FAR 52.204-16: Commercial and Government Entity Code Maintenance
FAR 52.204-21: Basic Safeguarding of Covered Contractor Information Systems
FAR 52.204-24: Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment
FAR 52.204-27: Prohibition on a ByteDance Covered Application
FAR 52.219-6: Notice of Total Small Business Set-Aside
FAR 52.223-5: Pollution Prevention and Right-to-Know Information
FAR 52.225-18: Place of Manufacture
FAR 52.225-25: Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation
FAR 52.227-1: Authorization and Consent
FAR 52.227-2: Notice And Assistance Regarding Patent And Copyright Infringement and Certifications.
FAR 52.229-3: Federal, State And Local Taxes
FAR 52.232-39: Unenforceability of Unauthorized Obligations
FAR 52.232-40: Providing Accelerated Payments to Small Business Subcontractors
FAR 52.240-1: Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities
FAR 52.252-2: Clauses Incorporated By Reference
DFARS 252.203-7000: Requirements Relating to Compensation of Former DoD Officials
DFARS 252.203-7002: Requirement to Inform Employees of Whistleblower Rights
DFARS 252.203-7005: Representation Relating to Compensation of Former DoD Officials
DFARS 252.204-7003: Control Of Government Personnel Work Product
DFARS 252.204-7007: Alternate A, Annual Representations and Certifications
DFARS 252.204-7008: Compliance With Safeguarding Covered Defense Information Controls
DFARS 252.204-7009: Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information
DFARS 252.204-7016: Covered Defense Telecommunications Equipment or Services – Representation
DFARS 252.204-7017: Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services – Representation
DFARS 252.204-7018: Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services
DFARS 252.211-7003: Item Unique Identification and Valuation
DFARS 252.211-7008: Use of Government-Assigned Serial Numbers
DFARS 252.215-7013: Supplies and Services Provided by Nontraditional Defense Contractors
DFARS 252.217-7026: Identification of Sources of Supply
DFARS 252.223-7008: Prohibition of Hexavalent Chromium
DFARS 252.225-7001: Buy American And Balance Of Payments Program—Basic
DFARS 252.225-7002: Qualifying Country Sources As Subcontractors
DFARS 252.225-7007: Prohibition on Acquisition of Certain Items from Communist Chinese Military Companies
DFARS 252.225-7008: Restriction on Acquisition of Specialty Metals
DFARS 252.225-7009: Restriction on Acquisition of Certain Articles Containing Specialty Metals
DFARS 252.225-7012: Preference For Certain Domestic Commodities
DFARS 252.225-7013: Duty-Free Entry—Basic
DFARS 252.225-7015: Restriction on Acquisition of Hand or Measuring Tools
DFARS 252.225-7048: Export-Controlled Items
DFARS 252.226-7001: Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns
DFARS 252.232-7003: Electronic Submission of Payment Requests and Receiving Reports
DFARS 252.232-7006: Wide Area Workflow Payment Instructions
DFARS 252.232-7010: Levies on Contract Payments
DFARS 252.243-7001: Pricing Of Contract Modifications
DFARS 252.244-7000: Subcontracts for Commercial Products or Commercial Services
RESONSIBILITY DETERMINATION
Sellers certify that they can meet the following requirements as part of the Government’s responsibility determination and can provide justification/substantiation if requested: The vendor does have adequate resources to perform the contract, or the ability to obtain them (see FAR 9.104-3(a)); the vendor does have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors). (See FAR 9.104-3(a)); the vendor does have the necessary production and technical equipment and facilities, or the ability to obtain them (see FAR 9.104-3(a)); and, the vendor is able, to comply with the required or proposed performance schedule, taking into consideration all existing commercial and governmental business commitments.
Additional requirements: Quotes are due by 11:00am EDT, 12 August 2025 to Tim Caracciolo at timothy.j.caracciolo.civ@us.navy.mil. Please see attachments for the SOW. All proposals shall meet ALL requirements as outlined in the attached SOW. Proposals shall include price, be “FOB: Destination”, with inspection and acceptance at “destination.” Hard copies of this Combined Synopsis/Solicitation and Amendments will NOT be mailed to the contractors. The Government will accept only electronic proposals.
Files
| File | Type | Posted |
|---|---|---|
| Attachment - Statement of Work.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Duplex Corrosion Resistant Steel | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Bar, metal | Naval Supply Systems Command | No set-aside | |
| Key | Naval Supply Systems Command | No set-aside | |
| Steel and other Materials for the Marietta Repair Station: Stamford Barrier Gate Material PH 2 | ENDIST Huntington | No set-aside | |
| Plate assembly, stau | Naval Supply Systems Command | No set-aside | |
| Hardware (HEX head capscrews & bolts) | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity