Drydock repairs to the USCG kight island (WPB-1348)

The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for Dock Side Repairs to the USCG KNIGHT ISLAND (WPB-1348), a 110 PATROL BOAT. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about SEPTEMBER 30, 2009. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SET-ASIDE FOR SMALL BUSINESS CONCERNS. The estimated value of this procurement is between $600,000.00 and $750,000.00. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. This acquisition is for DRYDOCK REPAIRS repairs to the USCGC KNIGHT ISLAND (WPB-1348), a 110 PATROL BOAT and is home ported in KEY WEST, FL. The performance period will be sixty (60) calendar days and is expected to begin on or about 07 December 2009 and end on or about 07 February 2010.

NOTE: GEOGRAPHIC RESTRICTION IS EXTENDED TO:

There is a geographic restriction of 576 nautical miles from the cutters home port of Key West, FL.



The scope of the acquisition is for the following aboard the USCGC :KNIGHT ISLAND (WPB-1348)

Routine Drydocking

Provide Temporary Logistics

Clean and Inspect Fuel Service Tanks

Clean and Inspect Fuel Stowage and Overflow Tanks

Clean and Inspect Oil and Oily Waste Tanks

Clean and Inspect Sewage Collection and Holding

Tanks

Clean and Inspect Grey Water Collection and Holding Tanks

Clean Sewage Piping System

Clean Grey Water Piping System

Clean and Disinfect Potable Water Tanks

Preserve and Disinfect Potable Water Tanks - 100%

Preserve Sewage Collection and Holding Tanks - 100%

Preserve Grey Water Collection and Holding Tanks -

100%

Preserve Forward Peak Compartment

Preserve Forward Void

Renew Floating Deck System in Galley and Mess Deck

Clean and Inspect Heat Exchangers

Inspect MDE Exhaust System

Overhaul Stabilizing Fins

Overhaul and Renew Sea Valves

Overhaul and Renew Firemain Valves

Overhaul and Renew Bilge and Ballast Valves

Remove, Inspect, and Reinstall Propellers

Remove, Inspect, and Reinstall Propeller Shafts

Overhaul Mechanical Shaft Seal Assemblies

Renew Water-Lubricated Propeller Shaft Bearings

Inspect and Maintain Cathodic Protection System

Remove, Inspect and Reinstall Rudder Assemblies

Overhaul Steering Gear Components

Renew Depth Indicating Transducer

Renew Speed Doppler

Preserve Underwater Body 100%

Preserve Freeboard - 100%

Preserve Stern Tubes

Renew Capastic Fairing

Preserve Bilge Surfaces In Various Locations

Preserve Forward Auxiliary Machinery Space

Preserve Port & Starboard Strut Cofferdams 100%

Renew Main Diesel Engine

Remove, Reinstall and Realign Main Diesel Engine

Remove, Reinstall and Realign Reduction Gear

Assemblies

Renew Ship Service Generator

Remove and Reinstall Ship Service Generator

Renew SSDG Exhaust Systems

Renew Structural Closures

Renew Air Conditioning Piping

Install New Grey Water Pumps and Piping

Upgrade Fire Alarm System (EC 110-C-137)

Perform Ultrasonic Thickness Measurements

Perform Air Test of Interior Compartments

Perform Aluminum Hull and Structural Repairs - 1/4"

Plate

Perform Aluminum Hull and Structural Repairs - 3/16"

Plate

Perform Aluminum Hull and Structural Repairs - 5/16"

Plate

Perform Hull and Structural Plating Repairs -Crack

(Aluminum)

Perform Hull and Structural Plating Repairs - Eroded

Weld (Aluminum)

Perform Hull and Structural Plating Repairs -

Overlay Welding (Aluminum)

Perform Steel Hull and Structural Plating Repairs

(5-Pound)

Perform Steel Hull and Structural Plating Repairs

(7.5-Pound or 7.65-Pound)

Perform Hull and Structural Plating Repairs - Eroded

Welds (Steel)

Perform Hull and Structural Plating Repairs -

Overlay Welding (Steel)

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102.



Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. MLCA must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above. e-mail to Frederick.b.baechle@uscg.mil or by fax (757) 628-4676. Questions may be referred to Barat Baechle via email or at (757) 628-4652.

.