Drydock CGC steelhead

Added: Nov 07, 2012 5:37 pm Modified: Nov 21, 2012 11:22 amTrack Changes 11/21/12 AMENDMENT (A00001) is issued to Solicitation No. HSCG80-13-R-P45032 is hereby amended as follows:

1. Changes the geographical restriction from 700 nautical miles (one way) to 1000 nautical miles (one-way) to a total of 2000 nautical miles (round-trip).

2. DUE DATE FOR PROPOSALS FOR CGC STEELHEAD WILL BE EXTENDED UNTIL 12/12/12 @ 10:00 E.S.T.
PLEASE SIGN THIS FORM AND SUBMIT THIS TO THE CONTRACTING OFFICER LISTED BELOW.

1/7/2012 SOLICITATION ISSUED - LINKS

Added: Nov 07, 2012 5:37 pm 11/7/2012 SOLICITATION ISSUED - LINKS

Added: Oct 25, 2012 12:32 pm The United States Coast Guard, Surface Forces Logistics Center, Detachment Norfolk VA, intends to issue a Commercial Request for Proposal (RFP) for Dry-dock and repairs to the CGC STEELHEAD (WPB-87324) an 87-Foot Patrol Boat. The NAICS Code is 336611.

The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Part 15, Contracting by Negotiation for Certain Commercial Items. The simplified acquisition will be issued as a Small Business Set-Aside. Request for Proposals (RFP) will be issued on or about November 2, 2012.

The acquisition is to perform drydock and repairs to the CGC STEELHEAD (WPB-87324). The vessels are geographically restricted to a facility located within an area no greater than 700 nautical miles one-way and 1400 nautical miles roundtrip from the vessels homeport of 1201 Navigational Blvd, Corpus Christi, TX 78402. The anticipated Period of performance is forty-four (44) calendar days from 13 March through 26 April 2013. All work will be performed at the contractor's facility.

The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFP release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.

** Funds are not presently available for this contract. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.

The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the CGC STEELHEAD. This work may include, but is not limited to:

1. Perform Ultrasonic Thickness Measurements (D)
2. Perform Ultrasonic Thickness Measurements (O)
3. Bilge Surfaces (Engine Room), Preserve (Partial) (D)
4. Bilge Surfaces (Mess Deck), Preserve (Partial) (O)
5. Dirty Oil Tank, Clean and Inspect (D)
6. Oily Watter Tank, Clean and Inspect (D)
7. Tanks (MP Fuel Service), Clean and Inspect (D)
8. Pilothouse Deck (Aluminum), Inspect, Preserve, and Renew Electrical Matting (D)
9. Depth Sounder, Capastic Fairing, Renew (O)
10. Main Engine/Reduction Gear, Realign (O)
11. Propulsion Shafts, Remove, Inspect, and Reinstall (D)
12. Propulsion Shaft, Repair (O)
13. Propulsion Shaft, Straighten (O)
14. Intermediate Water-Lubricated Propulsion Shaft Bearing, Renew (O)
15. Aft Water-Lubricated Propulsion Shaft Bearing, Renew (O)
16. Intermediate Bearing Carrier, Renew (O)
17. Aft Bearing Carrier, Renew (O)
18. Stern Tube, Interior Surfaces, Preserve 100% (O)
19. Stern Tube, Interior Surfaces, Repair (O)
20. Propellers, Remove, Inspect, and Reinstall (D)
21. Propeller, Minor Reconditioning and Repairs, Perform (O)
22. Fathometer Transducer, Renew (D)
23. Speed Log, Skin Valve Assembly, Clean and Inspect (D)
24. Sea Water System (Sea Valves, Strainers, Piping), Clean, Inspect, and Repair (D)
25. Rudder Assemblies, Remove, Inspect and Reinstall (D)
26. RHIB Notch Skid Pads, Inspect (D)
27. RHIB Notch Skid Pad Studs, Renew (O)
28. Stern Launch Door, Remove, Inspect and Reinstall (D)
29. Grew Water Holding Tank, Clean and Inspect (D)
30. Sewage Holding Tank, Clean and Inspect (D)
31. Grey Water Piping, Clean and Flush (D)
32. Sewage Piping, Clean and Flush (D)
33. U/W Body, Preserve ("100%") (O)
34. U/W Body, Preserve ("Partial-33%") (O)
35. Cathodic Protection/Zincs, Renew (D)
36. Drydocking (D)
37. Temporary Services, Provide (D)
38. Telephone Service, Provide (D)
39. Ventilation System, Engine Room Supply and Exhaust Fan Assemblies, Clean and Inspect, Preserve (D)

A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to Nancy.M.Brinkman@uscg.mil The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

Proposals are due on or about December 2, 2012 at 10:00 a.m. Eastern Standard Time and may be sent via:

Email: nancy.m.brinkman@uscg.mil or mailed to

US Coast Guard
SFLC/C&P1/PBPL
Attn: Nancy Brinkman
300 East Main Street, Suite 600
Norfolk, VA 23510-9102