Dry-dock repairs to USCGC northland and tampa

The United States Coast Guard, Surface Forces Logistics Center (CPD-C&P1-MECPL) intends to issue a firm, fixed price solicitation for:
DRY-DOCK REPAIRS TO USCGC NORTHLAND (WMEC 904) AND TAMPA (WMEC-902)

The period of performance: The date range for dry-docking of these two cutters is to be sometime during the period of May 1, 2012 through July 31, 2012. If both cutters are dry-docked at the same time, the length of the dry-dock shall not be more than 28 (twenty-eight) days. If the cutters are dry-docked separately, the length of each dry-dock shall be as follows: NORTHLAND - 35 (thirty-five) days; TAMPA - 28 (twenty-eight) days.  Both cutters home pier city is located in Portsmouth, Virginia.

IMPORTANT NOTE: GEOGRAPHIC RESTRICTION FOR REPAIRS TO BE CONDUCTED AT A SUITABLE FACILITY NO FARTHER THAN 50 MILES FROM HOMEPORT.

Work will include, but will not be limited to the following:
 
WORK ITEM 1: Inspect Propulsion Shafting CPP Oil Tubes (Port and Starboard)
WORK ITEM 2: Controllable Pitch Propeller (CPP) System, Service (Port and Starboard)
WORK ITEM 3: U/W Body, Preserve, Partial - Condition B
WORK ITEM 4: Hull Plating, Freeboard, Preserve
WORK ITEM 5: Dry-docking
WORK ITEM 6: Temporary Services, Provide
WORK ITEM 7: Install One Sea Strainer and Overhaul Two Sea Valves
WORK ITEM 8: Sea Trial Performance, Provide Support
WORK ITEM 9: Propulsion Shafting, Remove, Inspect and Reinstall (01 shaft)
WORK ITEM 10: Propulsion Intermediate Shaft, Remove, Inspect and Reinstall (01 shaft)
WORK ITEM 11: Propulsion Shafting (Thrust Shaft), Remove, Inspect and Reinstall (01 shaft)
WORK ITEM 12: Stern Tube Seal Assemblies, Overhaul (01 shaft)
WORK ITEM 13: Propeller Shaft Sleeve(s), Renew (01 shaft)
WORK ITEM 14: Propulsion Shaft Bearings (External), Check Clearances (01 shaft)
WORK ITEM 15: Propulsion Shaft Bearing Housings (External), Inspect (01 shaft)
WORK ITEM 16: Controllable Pitch Propeller Hub Assy, General Maintenance (01 shaft)
WORK ITEM 17: U/W Body, Preserve 100%
WORK ITEM 18: Stern Tube Interior Surfaces, Preserve 100% (01 shaft)
WORK ITEM 19: Hull Plating, Freeboard, Preserve 100%

USCGC TAMPA
WORK ITEM 1: U/W Body, Preserve "100%"
WORK ITEM 2: Temporary Services, Provide
WORK ITEM 3: Hull Plating Freeboard, Preserve "100%"
WORK ITEM 4: Dry-docking

This notice is not a request for proposals. On or about April 16, 2012, a Request for Proposal (RFP) will be available electronically at http://www.fedbizopps.gov. It is the Government's intent to solicit this requirement as unrestricted under NAICS 336611. Only one award will be made to the responsive, responsible offeror under this solicitation. The solicitation, specifications, and other pertinent information will be posted on www.fbo.gov.

All questions regarding this notice shall be submitted, in writing, to Karen.M.Marshall@uscg.mil.