DPW Waste Recycle Equipment (Cardboard Baler)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

THIS IS A HUBZONE SET-ASIDE SOLICITATION

Waste Recycle Equipment. One (1) Model HE-60-M (or equal) with the following
specifications: Baler Specifications: Full eject horizontal baler capable of
producing bale 60in W x 45 in x 30 in H; Baling system must include conveyor
compatible with and made for baler; Full Ram penetration to travel within 5 inches of door (single 8inch I.D Bore cylinder); Motor must be available in 240, 360 Or
480 volt; Ram force 150,000 lb minimum; Replaceable knife inserts; Vertical tie
slots in baler frame, wire guides under bale chamber floor; 3 year structural
warranty with 2 yr all parts and 1 yr labor; Vendor must be able to have a Factory
certified technician of their product with the capability to respond for repairs
within 8 hrs.

Baler feed conveyor specifications: 48inch above grade baler feed conveyor with
transition chute; 48inch belt width; Lower photo eye; Upper level photo eye;
Hopper access door with safety interlock; Hopper extension to mechanically
integrate baler to conveyor; Emergency stops and cords

Additional requirements: Freight must be included for all equipment; Hydraulic oil
(full capacity of baler) and anchoring hardware; Installation of Baling and
conveyor system; Offloading equipment supplied; Installation expense will include
the assembly crew's travel, hotel and per diem; System startup and operator's
training on site.

Delivery is expected 45 days after receipt of order (ARO). If you cannot deliver in this time period, please indicate when delivery is anticipated.

Offerors are reminded that the following provisions apply to this acquisition:
52.212-1, Instructions to Offerors -- Commercial
52.212-2, Evaluation -- Commercial Items
52.212-3, Offeror Representations and Certifications -- Commercial Items, shall be provided from the offeror with its offer.
52.212-4, Contract Terms and Conditions -- Commercial Items
52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items

Additional information: The offeror must be registered in the System for Award Management (SAM) in order to be considered for award. The link to the website for registration is https://www.sam.gov. All information pertaining to SAM registration can be found on this website. Questions pertaining to use of the website and registration should be directed to the online customer service provide by the SAM website.
*1. Cage Code # ___________ (252.204-7004) (You will have this number if you are registered with DoD) If you are not registered, log on to https://www.sam.gov to register.
*2. Email Address: ______________________________
*3. Terms for Payment _____________ (if not furnished Net 30 will be used on the contract) (Net 30, 1% 20 days, 2% 10 days, etc)
*4. NOTICE TO CONTRACTOR:
Contractors are required to register in Wide Area Workflow, (WAWF) and are responsible for this registration. For information on WAWF log onto: https://www.wawftraining.com/ (Web-based Training Course for Wide Area Workflow (WAWF) (see clause 252.232-7003)

All offers are due to the below email address NLT 10:00AM CST, 30 July 2014.

POC: Mr. Kyle L. Heid, 337-531-2357, email: kyle.l.heid.civ@mail.mil

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

THIS IS A HUBZONE SET-ASIDE SOLICITATION

Waste Recycle Equipment. One (1) Model HE-60-M (or equal) with the following
specifications: Baler Specifications: Full eject horizontal baler capable of
producing bale 60in W x 45 in x 30 in H; Baling system must include conveyor
compatible with and made for baler; Full Ram penetration to travel within 5 inches
of door (single 8inch I.D Bore cylinder); Motor must be available in 240, 360 Or
480 volt; Ram force 150,000 lb minimum; Replaceable knife inserts; Vertical tie
slots in baler frame, wire guides under bale chamber floor; 3 year structural
warranty with 2 yr all parts and 1 yr labor; Vendor must be able to have a Factory
certified technician of their product with the capability to respond for repairs
within 8 hrs.

Baler feed conveyor specifications: 48inch above grade baler feed conveyor with
transition chute; 48inch belt width; Lower photo eye; Upper level photo eye;
Hopper access door with safety interlock; Hopper extension to mechanically
integrate baler to conveyor; Emergency stops and cords

Additional requirements: Freight must be included for all equipment; Hydraulic oil
(full capacity of baler) and anchoring hardware; Installation of Baling and
conveyor system; Offloading equipment supplied; Installation expense will include
the assembly crew's travel, hotel and per diem; System startup and operator's
training on site.

Delivery is expected 45 days after receipt of order (ARO). If you cannot deliver in this time period, please indicate when delivery is anticipated.

Offerors are reminded that the following provisions apply to this acquisition:
52.212-1, Instructions to Offerors -- Commercial
52.212-2, Evaluation -- Commercial Items
52.212-3, Offeror Representations and Certifications -- Commercial Items, shall be provided from the offeror with its offer.
52.212-4, Contract Terms and Conditions -- Commercial Items
52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items

Additional information: The offeror must be registered in the System for Award Management (SAM) in order to be considered for award. The link to the website for registration is https://www.sam.gov. All information pertaining to SAM registration can be found on this website. Questions pertaining to use of the website and registration should be directed to the online customer service provide by the SAM website.
*1. Cage Code # ___________ (252.204-7004) (You will have this number if you are registered with DoD) If you are not registered, log on to https://www.sam.gov to register.
*2. Email Address: ______________________________
*3. Terms for Payment _____________ (if not furnished Net 30 will be used on the contract) (Net 30, 1% 20 days, 2% 10 days, etc)
*4. NOTICE TO CONTRACTOR:
Contractors are required to register in Wide Area Workflow, (WAWF) and are responsible for this registration. For information on WAWF log onto: https://www.wawftraining.com/ (Web-based Training Course for Wide Area Workflow (WAWF) (see clause 252.232-7003)

All offers are due to the below email address NLT 10:00AM CST, 30 July 2014.

POC: Mr. Kyle L. Heid, 337-531-2357, email: kyle.l.heid.civ@mail.mil

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

See attached solicitation for specific information.
Waste Recycle Equipment. One (1) Model HE-60-M (or equal) with the following
specifications: Baler Specifications: Full eject horizontal baler capable of
producing bale 60in W x 45 in x 30 in H; Baling system must include conveyor
compatible with and made for baler; Full Ram penetration to travel within 5 inches
of door (single 8inch I.D Bore cylinder); Motor must be available in 240, 360 Or
480 volt; Ram force 150,000 lb minimum; Replaceable knife inserts; Vertical tie
slots in baler frame, wire guides under bale chamber floor; 3 year structural
warranty with 2 yr all parts and 1 yr labor; Vendor must be able to have a Factory
certified technician of their product with the capability to respond for repairs
within 8 hrs.

Baler feed conveyor specifications: 48inch above grade baler feed conveyor with
transition chute; 48inch belt width; Lower photo eye; Upper level photo eye;
Hopper access door with safety interlock; Hopper extension to mechanically
integrate baler to conveyor; Emergency stops and cords

Additional requirements: Freight must be included for all equipment; Hydraulic oil
(full capacity of baler) and anchoring hardware; Installation of Baling and
conveyor system; Offloading equipment supplied; Installation expense will include
the assembly crew's travel, hotel and per diem; System startup and operator's
training on site.