Dog Wedge

NSN: 2040-01-435-8933
Item Name: Dog Wedge
AMC/AMSC Code: 1G
NAICS Code: 332510; the small business size standard is 500 employees.

This acquisition is for supplies for which there are approved Government drawings. FOB and Inspection/Acceptance will be at Origin. The proposed procurement will be an Indefinite Delivery Contract (IDC) and will be for a total of three (3) years, including one (1) base year and two (2) option years. The total duration shall not exceed 3 years. The requested delivery is 120 days or less. The Product Item Description (PID) and Packaging information for this item are below.

Based upon market research, the Government is using the policies contained in FAR Part 13 - Simplified Acquisition Procedures - in its solicitation for the described supplies or services.

This will be solicited as a Total Small Business Set-Aside acquisition, utilizing full & open competition. The solicitation will be available at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its estimated issue date of February 11, 2019.

RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form 18 (Request for Quotation). All responsible sources may submit an offer/proposal, which shall be considered.

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors, as described in the solicitation.

One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

Notice: This solicitation contains DLAD Procurement Note L09 for Reverse Auction (RA). The Government reserves the right to activate this provision after timely offers have been received and evaluated.

*****Product Item Description (PID) and Packaging Information*****

NSN 2040-01-435-8933

DOG WEDGE, LH.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR
SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RT001: MEASURING AND TEST EQUIPMENT

SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT
CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ALUMINUM BRONZE MATERIAL.

FULL AND OPEN COMPETITION APPLIES.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 6397262
REVISION NR B DTD 12/20/2007
PART PIECE NUMBER: 803-6397262 PC 15

IAW REFERENCE DRAWING NR 80064 2226372
REVISION NR B DTD 10/06/1987
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 6397261
REVISION NR B DTD 12/20/2007
PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D4 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

.