Dock-Side (DS): USCGC HEALY Fiscal Year 2021

This announcement is a Sources Sought Synopsis (market survey). This is not a Request for Quote (RFQ) or a Request for Proposal (RFP). This announcement is for information and planning purposes only and is not a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The purpose of this sources sought is to determine interest and capability of potential businesses. The Government may use responses to this sources sought synopsis to make an appropriate acquisition decision for this project.

The U.S. Coast Guard Surface Forces Logistics Center is conducting market research for potential qualified contractors for the dockside of the Coast Guard Cutter (CGC) HEALY from 05Jan2021 to 10May2021 in Seattle, WA.

The CGC HEALY is homeported in Seattle, WA at 1519 Alaskan Way S., Seattle, WA 98134. The CGC HEALY, the Coast Guard's largest vessel, is 420 feet long, 82 feet wide, drafts 31 feet (at full load), and weighs 16,660 long tons (at full load).

NAICS Code for this requirement: 336611 – Ship Building and Repairing
FSC Code for this requirement:  J999 – Non-Nuclear Ship Repair (West)
Size Standard: 1,250 Employees

Please note that it is excepted that during performance of the dockside there will be a significant amount of work that will be done on the Science Winch Control Systems, and the Main Diesel Engines by the Original Equipment Manufacturers (OEMs) that may require laydown area on the pier, as well as regular coordination with the Coast Guard and the OEMs to avoid overlap in work and other issues that may arise.

Significant work items include (but not limited to):

• NACE Inspector (Level 3), Provide
• Freeboard, Partial Preserve 
• Hull Plating (U/W Body, Freeboard), Ultrasonic Testing
• Hull Plating (U/W Body), Diver’s Inspect
• Propulsion Shafting, Align and Check
• Fuel Oil Purifier (FOP) Overhaul
• Lube Oil Purifier (LOP) Overhaul
• Boiler, Annual Maintenance
• Vent Ducts (Living Spaces), Commercial Cleaning
• Port & Starboard Miranda Davit, Annual Inspect and Repair
• Aft Port Crane K15-45, Annual Inspect and Repair
• Aft Starboard Crane K40-55, Annual Inspect and Repair
• 04 Deck Crane (Port) TB 100-55, Biennial Overhaul
• 04 Deck Crane (Starboard) TB 100-55, Biennial Overhaul
• Bow Crane TB 60-65, Annual Inspect and Repair
• A-Frames, Annual Inspect and Test
• Instrumented Science Winch Sheaves, Inspect
• Damage Control and Firefighting Systems, PMS
• Valves, Renew
• Bow Thruster Gearbox, Replace
• Deck Sockets, Modify
• Flex Hose Assemblies, Renew
• Internal Hoists, Annual Inspect and Test
• Decks - Exterior, Renew ("MIL-Spec/Flight Deck" System)
• Helicopter Talon Grid, Inspect and Test
• Interior Decks, Preserve
• Antenna Foundations, Preserve
• Compartment Preservation
• Sea Strainer, Duplex, Overhaul
• High Pressure Breathing Air Compressor, Replace
• Roller Curtain Doors, Replace
• Thrust Bearing, Inspect
• Exterior Exhaust Fittings, Partial Preservation

If interested please respond to the attached questionnaire returning it via email to Contract Specialist, Amy Kelm, at Amy.A.Kelm@uscg.mil. Please insert - Sources Sought Response to 70Z08521IP P4501400 in the subject line. Response deadline: 17June2020 at 9:00 a.m. Pacific Standard Time.

No cost or pricing data is required.  All responsible sources may submit a capability statement, which will be considered by the agency.

The Government intends to advertise a solicitation for this project in the future. At this time, a solicitation does not exist; therefore, offers shall not be accepted. It is the potential Offeror's responsibility to monitor https://beta.sam.gov/  for release of any future solicitation that may result from this Sources Sought Notice

No cost or pricing data is required.  All responsible sources may submit a capability statement, which will be considered by the agency.