Dismantle and Disposal of Web Offset Press

Added: Sep 21, 2017 2:00 pm The Bureau of Engraving and Printing (BEP), Office of Facility Support has a requirement to dismantle and
dispose of a Web offset Press located in room 300M 3rd Floor, A-wing of the Main Building. The Web press is
thirty years old and is no longer productive to BEP's production process. Therefore, BEP is removing the Web
press to provide space for new equipment. Rigging drawing(s) must show the entire rigging system required to
remove the Web press as stated in section 1.0 of the PWS and after the approval of the rigging plan(s) by BEP,
the contractor will be authorized to execute the tasks stated in the PWS. The contractor shall dismantle and
dispose of the Web Offset Press for scrap value. The Government will identify and remove any sensitive
components/devices from the Web press before disposal. All proceeds from the scrap value shall be returned to the Government. The contractor shall dismantle and dispose of all parts and accessories associated with the Web Offset Press to include but no limited to: Web Offset Press, Pollution Control Device, control panels, ducting, wiring, piping and miscellaneous ancillary equipment. All proceeds from the scrap value shall be returned to the government.