Digester Gas Maintenance and Repair at Waste Water Treatment Facility

*** 17NOV20 Update: No questions were received prior to the question due date. No Amendment to the Solicitation will be issued.***

The contractor shall plan, program, administer, manage, and execute the work necessary to provide the specified services and maintenances for the anaerobic digester gas treatment system, controls and sensors; see Appendix A. The contractor shall provide personnel, management, equipment, tools, transportation, and other items and, necessary to perform preventive maintenance of identified system components as defined in this PWS at JBLM.

This service will include, but not limited to: preventive maintenance (parts lubricated; motors and pumps alignments; electrical terminal tightness; check for leaks; instruments calibration, if needed; inspection and test of the gauges; gauges and valves calibration and certifications; gas burner inspection and maintenance; and any other preventive maintenance not mentioned in this document) and corrective maintenance (the repair of faulty instruments or components found during the service visit) and the service call due to emergency situation, like a sudden shutdown; Hydrogen Sulfide (H2S) gases levels suddenly sky rocking, or any discrepancy authorized by the contracting officer (KO) and/or the contracting officer representative (COR). The contractor shall comply with all

applicable Department of Defense, Army, Federal, State, and local laws, regulations, codes, technical manuals, and acceptable commercial practices in the delivery of required services.

The contractor shall plan, program, administer, manage, and execute the work necessary to provide the specified services and maintenances for the anaerobic digester gas treatment system, controls and sensors; see Appendix A. The contractor shall provide personnel, management, equipment, tools, transportation, and other items and, necessary to perform preventive maintenance of identified system components as defined in this PWS at JBLM.

This service will include, but not limited to: preventive maintenance (parts lubricated; motors and pumps alignments; electrical terminal tightness; check for leaks; instruments calibration, if needed; inspection and test of the gauges; gauges and valves calibration and certifications; gas burner inspection and maintenance; and any other preventive maintenance not mentioned in this document) and corrective maintenance (the repair of faulty instruments or components found during the service visit) and the service call due to emergency situation, like a sudden shutdown; Hydrogen Sulfide (H2S) gases levels suddenly sky rocking, or any discrepancy authorized by the contracting officer (KO) and/or the contracting officer representative (COR). The contractor shall comply with all

applicable Department of Defense, Army, Federal, State, and local laws, regulations, codes, technical manuals, and acceptable commercial practices in the delivery of required services.