Dewatering System Repairs at Walter F. George Lock and Dam, Fort Gaines, GA
Pre-Solicitation Posted
Not the latest version. See the latest solicitation from .
- Solicitation number
- W9127825RA040
- Agency
-
ENDIST Mobile
US Army Corps of Engineers, Department of Defense
- Responses due
- Not on record
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 541330 Engineering Services
- Place of performance
- Fort Gaines, Georgia 39851, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Corps of Engineers Engineering District Mobile is seeking a contractor to perform comprehensive dewatering system repairs at the Walter F. George Lock and Dam in Fort Gaines, Georgia. The solicitation requires a contractor to furnish all necessary labor, materials, equipment, and resources to repair and maintain the lock's unwatering and dewatering infrastructure. Specific work includes removing and replacing relief well risers and check valves, inspecting and cleaning lock drain pipes, grouting horizontal drains, removing existing pumps from landside and riverside wells, and developing a systematic dewatering plan to control uplift pressures and seepage. The solicitation will be available for download on May 29, 2025, exclusively through the Procurement Integrated Enterprise Environment (PIEE) website, and all potential offerors must be registered in the system before accessing the document. Potential contractors must have an average annual gross revenue not exceeding $25.5 million over the past three years to qualify under the NAICS Code 541330 for Engineering Services.
The procurement is unrestricted and does not have a specific set-aside designation. The anticipated period of performance spans from Fall 2025 to Winter 2026, with work to be conducted at the Walter F. George Lock and Dam located at 427 Eufaula Rd, Fort Gaines, GA. The contract will involve multiple complex tasks, including the removal of five 8-inch pumps from landside wells at depths between 110 to 170 feet and five 8-inch pumps from riverside wells at approximately 75 feet below grade. The contractor will be responsible for comprehensive well inspections, potential well revitalization, providing portable power supply and pumps for drawdown tests, and generating a detailed drawdown report. While specific award values are not disclosed in the pre-solicitation notice, the complexity of the work suggests a significant technical and logistical undertaking focused on ensuring the safe maintenance of the lock infrastructure.
Notice text
The solicitation package will be available for download on or about 29 May 2025.
The Contractor shall furnish all labor, materials, fittings, equipment, tools, power, lubricants, fuel, water, electricity, power, etc., necessary to provide repair services for unwatering and dewatering elements necessary for the Walter F. George lock to be safely unwatered. The scope of work shall include, but is not limited to, the following types of work: removal and replacement of relief well risers and check valves, removal and replacement of peripheral drain risers and check valves, inspect and clean lock relief well and peripheral drain pipes, grout or plug 18 horizontal drains, approximately 12 inches in diameter, in the lock monolith along the heel of riverside lock wall, removal and proper disposal of five 8-inch pumps from the existing landside wells with depths from 110 to 170 feet below grade, removal and proper disposal of five 8-inch pumps from the existing riverside wells approximately 75 feet below grade, comprehensive inspection of the landside and riverside wells, the option to revitalize wells, provide portable power supply and pump(s) for performing drawdown tests, develop a drawdown report, and provide a systematic dewatering plan for controlling uplift pressures and seepage beneath the lock floor for the Walter F. George Lock. All these efforts are to ensure the Walter F. George lock can be safely unwatered to perform maintenance. The place of performance is Walter F George Lock and Dam, 427 Eufaula Rd, Fort Gaines, GA 39851. The anticipated period of performance is Fall 2025 to Winter 2026.
This procurement is unrestricted. The NAICS Code applicable to this requirement is 541330, the size standard for which is a concern, including its affiliates whose average annual gross revenues does not exceed $25.5M for the past three years.
The solicitation will only be issued as a direct download at the following website: https://piee.eb.mil. All offerors must be registered in the Procurement Integrated Enterprise Environment (PIEE) before they will be allowed to download solicitation information.
The solicitation will not be provided in a printed paper format; however, the Government reserves the right to revert to paper medium when it is determined to be in the Government’s best interest. Therefore, it is the offeror’s responsibility to check the website for solicitation posting and any changes to this solicitation. Those registering are responsible for the accuracy of the information provided.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Dewatering System Repairs at Walter F. George Lock and Dam, Fort Gaines, GA | Solicitation | |
| This notice | Pre-Solicitation | |
| Dewatering System Repairs at Walter F. George Lock and Dam, Fort Gaines, GA | Pre-Solicitation |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity