Design bid build FY18 dangerous cargo pad and combat arms training and maintenance (CATM) facility, cannon air force base, curry county, NM

DESIGN BID BUILD DANGEROUS CARGO PAD AND COMBAT ARMS TRAINING AND MAINTENANCE (CATM) FACILITY, CANNON AIR FORCE BASE, CURRY COUNTY, NM

The proposed procurement is an Unrestricted Best Value Request For Proposal (RFP), and thus open to large and small businesses. NAICS is 236220, with a size standard of $39,500,000.00. The magnitude of construction for this project will be between $25,000,000.00 and $100,000,000.00. Bonding will be required for this acquisition. Offerors attention is directed to Section 00 21 00 in the Solicitation for information regarding the tour of the site. Plans will be issued on or about 27 July 2021, with proposals due on or about 4 October 2021. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process.

THE PROJECT consists of construction of a dangerous cargo pad area and new CATM facilities to include an indoor small arms range, CATM building, and the Rod and Gun Club facility with a trap and skeet range utilizing conventional design and construction methods to accommodate the mission of the facility. This project includes demolition and remediation of the existing CATM facilities and compass calibration pad, approximately 8,501 SM in size. Total project includes demolition, floor slab, structural framing, insulated walls and roof, HVAC, fire suppression, openings, finishes, environmental remediation, utilities, roads, parking, site improvements, communications, and all other necessary support to ensure a complete and usable facility.

THE PROJECT will be advertised as a Request for Proposal. Competitive proposals will be evaluated based on the evaluation criteria set forth in the solicitation package. Evaluation by the Government will result in selection of a firm that represents the best value to the Government. The proposed procurement will result in a firm-fixed price contract. Questions of a technical nature should be addressed to Mr. Lance Faerber at: Lance.r.faerber@usace.army.mil. OFFERORS MUST BE REGISTERED with System for Award Management (SAM), in order to receive a Government Contract award. To register, the SAM Internet address is: https://sam.gov/content/home.

This solicitation will be issued via Internet only.  Notification of amendments shall be made via Internet only, as well. It is therefore the contractors’ responsibility to check the following address daily for any posted changes to this solicitation. For security reasons, all technical and engineering data related to this solicitation will be distributed using the SAM.gov system. SAM.gov is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested offerors must register with SAM.gov or they will not be able to download information from the site. Registration instructions can be found on the website at https://sam.gov/content/home. Contractors registered with SAM.gov may view and/or download this solicitation and all amendments from the Internet AFTER SOLICITATION ISSUANCE. Offerors are encouraged to post notices of prospective subcontracting opportunities on the website. Offerors are advised that this requirement may be delayed, cancelled, or revised at any time during the solicitation, or final award process.