Design and Construction of Flight Control Tower Fort Bliss, Texas

The following two (2) contractors were selected by the Government to enter into Phase II for W9126G-14-R-0010, Design and Construct a Control Tower with primary facilities located at Fort Bliss, Texas.

1. SGS, LLC
Attn: Eddie Scott
4400 SW 15th Street
Oklahoma City, OK 73108
Eddie.Scott@sgs-llc.net
(405) 416-8400

2. Venegas Engineering Management & Construction, Inc. (VeMac)
Attn: Oscar E. Venegas
1919 E. Rio Grande Ave.
El Paso, TX 79902
oscar@vemac.us
(915) 566-1911



----------------

This construction contract will be procured through a 2-Phase Design-Build RFP process, set aside 100% for small businesses.

This project will take place on Fort Bliss, TX and will include the design and construction a Flight Control Tower with primary facilities which include a Flight Control Cab, Airspace Information Center, a Ground Control Approach Maintenance Ship, Equipment Room, Traiing Rooms, Mech Rooms, Administrative spec, storage areas, latrines, elevator & backup power. EMCS, IDS, and ATFP requirements. Supporting facilities include, but are not limited to, paving, walks, curbs, gutters, storm drainage, communications, site demolition, sewers, and landscaping..

The magnitude of construction is between $5 - $10 Million.

The RFP is anticipated to be issued NO EARLIER THAN November 1, 2013, and bids will be due on or about December 1, 2013.

The 2002 North American Industrial Classification System (NAICS) code applicable to this project is 236220. The Product Service Code is Y1BA. The Small Business Size Standard is $33.5 Million.

After solicitation issuance, contractors may view and or download this solicitation, specifications and all amendments at the following internet addresses: Army Single Face to Industry (https://acquisition.army.mil/asfi/) OR on the Federal Business Opportunities Website (www.fbo.gov ). Type in the search box the solicitation number W9126G-14-R-0010. (Do not include period in link). The use of the websites requires prior registration. Plans and specifications will NOT be made available in paper format or on compact disc. It is the Offerors responsibility to monitor the FedBizOps website and or any other official government website for amendments to the solicitation. You must be registered with the System for Award Management (SAM), to receive a Government contract award. You may register on the SAM Website at http://www.sam.gov/.

The Primary Point of Contract for this project is Mr. Andrew J. Nelson, Contract Specialist, email is andrew.j.nelson2@usace.army.mil . All questions MUST be received through email for record. The Government reserves the right to use only the Internet as notification of any amendments to this solicitation. It is the offerors responsibility to view the websites daily for amendments to the solicitation. Accordingly, prospective contractors may view and/or download the solicitation and all amendments from the FedBizOps address after solicitation issuance. Contractors shall register themselves at this website under the solicitation number to receive a copy of the solicitation. Further, all potential offerors are also encouraged to visit the Army Single Face to Industry website located at http://acquisition.army.mil/default.htm to view other official business opportunities.

This construction contract will be procured through a 2-Phase Design-Build RFP process, set aside 100% for small businesses.

This project will take place on Fort Bliss, TX and will include the design and construction a Flight Control Tower with primary facilities which include a Flight Control Cab, Airspace Information Center, a Ground Control Approach Maintenance Ship, Equipment Room, Traiing Rooms, Mech Rooms, Administrative spec, storage areas, latrines, elevator & backup power. EMCS, IDS, and ATFP requirements. Supporting facilities include, but are not limited to, paving, walks, curbs, gutters, storm drainage, communications, site demolition, sewers, and landscaping..

The magnitude of construction is between $5 - $10 Million.

The RFP is anticipated to be issued NO EARLIER THAN November 1, 2013, and bids will be due on or about December 1, 2013.

The 2002 North American Industrial Classification System (NAICS) code applicable to this project is 236220. The Product Service Code is Y1BA. The Small Business Size Standard is $33.5 Million.

After solicitation issuance, contractors may view and or download this solicitation, specifications and all amendments at the following internet addresses: Army Single Face to Industry (https://acquisition.army.mil/asfi/) OR on the Federal Business Opportunities Website (www.fbo.gov ). Type in the search box the solicitation number W9126G-14-R-0010. (Do not include period in link). The use of the websites requires prior registration. Plans and specifications will NOT be made available in paper format or on compact disc. It is the Offerors responsibility to monitor the FedBizOps website and or any other official government website for amendments to the solicitation. You must be registered with the System for Award Management (SAM), to receive a Government contract award. You may register on the SAM Website at http://www.sam.gov/.

The Primary Point of Contract for this project is Mr. Andrew J. Nelson, Contract Specialist, email is andrew.j.nelson2@usace.army.mil . All questions MUST be received through email for record. The Government reserves the right to use only the Internet as notification of any amendments to this solicitation. It is the offerors responsibility to view the websites daily for amendments to the solicitation. Accordingly, prospective contractors may view and/or download the solicitation and all amendments from the FedBizOps address after solicitation issuance. Contractors shall register themselves at this website under the solicitation number to receive a copy of the solicitation. Further, all potential offerors are also encouraged to visit the Army Single Face to Industry website located at http://acquisition.army.mil/default.htm to view other official business opportunities.