Decontaminate Indoor Firing Range

Added: Apr 22, 2014 9:47 am This Sources Sought notice is for informational and planning purposes only. It does not constitute a Solicitation and is not to be considered as a commitment by the Government. All firms responding to this sources sought notice are advised that their response to this notice is not a request that will be considered for contract award. The information from this market research is for planning purposes only and will assist the Government in planning its acquisition strategy. This is strictly market research and the Government will not entertain questions concerning this market research. The NAICS Code for this requirement is 541330.

The intent of this notice is to determine the availability of qualified commercial sources technically capable of providing the below.

The Defense Forensic Science Center (DFSC) ), located at Gillem Enclave, Forest Park, Georgia, provides forensic laboratory services to Department of Defense investigative agencies and other Federal law enforcement agencies. The U.S. Army Criminal Investigation Laboratory (USACIL) operates an indoor firing range as part of those services. Decontaminate Indoor Firing Range: The Contractor will decontaminate all horizontal surfaces in the indoor firing range and bullet recovery room, and replace the bullet recovery tank HEPA filter and Wet Snail Trap Snail Oil. Decontamination by Hazardous Waste Operations Technician, HAZMAT Responder or Lead Abatement Specialist will consist of wet-wiping, High Efficiency Particulate Air (HEPA) vacuuming, or a combination of both to remove lead dust from these locations. Wipe samples will be taken to verify cleanliness after decontamination. The objective is for the provider to minimize loss of operational capacity by removing all traces of lead contamination. The total contractor time for this work assignment shall not exceed a one month performance, 30 June 2014 - 31 July 2014. The contractor will propose the number of hours required to satisfactorily and professionally meet all the requirements. This information is provided to the vendor as a workload estimate only. However, it is the contractor's responsibility to propose and deploy the correct labor types, mix, and hours required to satisfactorily and professionally meet all PWS requirements.

Potential offerors having the ability to provide the product described are invited to provide a statement via e-mail. The statements shall not exceed five (5) pages and must include the following: 1) Company name and Point of Contact information (address, telephone, e-mail, web-site, etc.); 2) DUNS number and CAGE code; 3) Small Business Size/Certification (to include 8(a), HUBZone, SDVOSB, etc.); and 4) Ability to provide the product.

Responses are due no later than 1:00 p.m. EST, Friday, 25 April 2014, and shall be electronically submitted to SFC Hamilton, Gregory at gregory.m.hamilton10.mil@mail.mil. All responses will be used to determine the appropriate acquisition strategy for a potential future acquisition. Response is strictly voluntary; no reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow-up information requests.