Custom Reusable Shipping Containers

THIS REQUIREMENT HAS BEEN AWARDED TO ADVANCED PACKAGING, INC.

The Naval Air Warfare Center Aircraft Division, Lakehurst, NJ 08733 is looking to procure 32 each of Custom Reusable Shipping Containers in accordance with Drawing PL901-392-069 for V-22 Blade Bolt Remove/Install Set.
The drawings involved are Export Controlled. Drawings available under separate cover. All requests for copies of these drawings must contain a certified copy of DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800)352-3572 or www.dlis.dla.mil/jcp/documents.him. The certified DD2345 shall be sent Debbie Dewyea at fax 732-323-7192 or email to deborah.dewyea@navy.mil to obtain all the applicable specifications.
The contractor shall supply all material equipment and consumable supplies to manufacture in its entirety 32 ea. Custom Reusable Shipping Containers IAW Bell Helicopter Textron drawing PL901-392-069 Rev; B/ Parts List Rev; A.

STATEMENT OF WORK:
1 Cases depicted in this drawing shall meet all requirements of MIL-C-4150 TYPE 1, STYLE 1; commercial equivalent specification may be used in lieu of MIL-C-4150.
2 Case material to be Rotational Molded Plastic.
3 Color to be Forest Green, number 24054 per FED-STD-595 shall be molded into plastic. No painting allowed.
4 Case shall have a hinged closure, non-removable lid.
5 Case shall have a minimum of two caster wheels located on case end.
6 Case shall meet rotational molding standards:
Dimension range: 1 to 5.99 +/- 0.12
6 to 36.99 +/- 0.19
37 to 72.99 +/- 0.25
7 Airtight, 0.5 PSI relief valve and vacuum valve with internal installation.
8 Latched shall be stainless steel black passivated finish and shall be adjustable over the center type, tension clasp.
9 Polyethylene lift handles with approximately 4.0 wide X 2.0 high grip/bail opening.
10 No locks permitted.
11 No security seal.
12 There shall be no sharp corners or edges. Minimum corner/edge radius 0.25.
13 Locate pressure relief valve approximately as shown.
14 Dunnage material shall conform to A-A-59136, TYPE I, CLASS 1 or 4, GRADE A or equivalent. Color shall be Black.
15 Dunnage shall fit cleanly within the case. A gap of .1 maximum is permitted between case shell and dunnage.
16 Do not bond dunnage to case.
Delivery shall be 45 days from award of contract.
Packaging/Preservation: Shall be best commercial practice that assures no damage to subject cases in shipment.
Inspection & Acceptance: Destination; FOB: Destination. Ship to NAVAIR Lakehurst, NJ 08733.
This is a combined synopsis/solicitation; this announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. This requirement is 100% Set-Aside for Small Business.
All vendors must be registered in the Central Contract Registration (CCR) Database. The internet website is http://www.ccr.dlsc.dla.mil/ccringq or www.ccr.gov. It is mandatory to register with the CCR as your Duns Number(Data Universal Numbering System) and your CAGE (Commercial and Government Entity) code will be required to conduct business with the Department of Defense. In addition, all invoices will be electronically submitted in the Wide Area Work Flow(WAWF); information available in Clause 252,232-7003. Additional information required: Cage Code, Duns Number, Tax ID Number, Payment Terms, Delivery schedule, Delivery charges if applicable, GSA contract number if applicable, Business size, and Email address. All responses will be made to Debbie Dewyea at fax 732-323-7192 or email: deborah.dewyea@navy.mil. All responsible sources may submit a quotation which, if received in a timely manner, shall be considered by the agency. Closing date is 09 July 2012.

.

The Naval Air Warfare Center Aircraft Division, Lakehurst, NJ 08733 is looking to procure 32 each of Custom Reusable Shipping Containers in accordance with Drawing PL901-392-069 for V-22 Blade Bolt Remove/Install Set.
The drawings involved are Export Controlled. Drawings available under separate cover. All requests for copies of these drawings must contain a certified copy of DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800)352-3572 or www.dlis.dla.mil/jcp/documents.him. The certified DD2345 shall be sent Debbie Dewyea at fax 732-323-7192 or email to deborah.dewyea@navy.mil to obtain all the applicable specifications.
The contractor shall supply all material equipment and consumable supplies to manufacture in its entirety 32 ea. Custom Reusable Shipping Containers IAW Bell Helicopter Textron drawing PL901-392-069 Rev; B/ Parts List Rev; A.

STATEMENT OF WORK:
1 Cases depicted in this drawing shall meet all requirements of MIL-C-4150 TYPE 1, STYLE 1; commercial equivalent specification may be used in lieu of MIL-C-4150.
2 Case material to be Rotational Molded Plastic.
3 Color to be Forest Green, number 24054 per FED-STD-595 shall be molded into plastic. No painting allowed.
4 Case shall have a hinged closure, non-removable lid.
5 Case shall have a minimum of two caster wheels located on case end.
6 Case shall meet rotational molding standards:
Dimension range: 1 to 5.99 +/- 0.12
6 to 36.99 +/- 0.19
37 to 72.99 +/- 0.25
7 Airtight, 0.5 PSI relief valve and vacuum valve with internal installation.
8 Latched shall be stainless steel black passivated finish and shall be adjustable over the center type, tension clasp.
9 Polyethylene lift handles with approximately 4.0 wide X 2.0 high grip/bail opening.
10 No locks permitted.
11 No security seal.
12 There shall be no sharp corners or edges. Minimum corner/edge radius 0.25.
13 Locate pressure relief valve approximately as shown.
14 Dunnage material shall conform to A-A-59136, TYPE I, CLASS 1 or 4, GRADE A or equivalent. Color shall be Black.
15 Dunnage shall fit cleanly within the case. A gap of .1 maximum is permitted between case shell and dunnage.
16 Do not bond dunnage to case.
Delivery shall be 45 days from award of contract.
Packaging/Preservation: Shall be best commercial practice that assures no damage to subject cases in shipment.
Inspection & Acceptance: Destination; FOB: Destination. Ship to NAVAIR Lakehurst, NJ 08733.
This is a combined synopsis/solicitation; this announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. This requirement is 100% Set-Aside for Small Business.
All vendors must be registered in the Central Contract Registration (CCR) Database. The internet website is http://www.ccr.dlsc.dla.mil/ccringq or www.ccr.gov. It is mandatory to register with the CCR as your Duns Number(Data Universal Numbering System) and your CAGE (Commercial and Government Entity) code will be required to conduct business with the Department of Defense. In addition, all invoices will be electronically submitted in the Wide Area Work Flow(WAWF); information available in Clause 252,232-7003. Additional information required: Cage Code, Duns Number, Tax ID Number, Payment Terms, Delivery schedule, Delivery charges if applicable, GSA contract number if applicable, Business size, and Email address. All responses will be made to Debbie Dewyea at fax 732-323-7192 or email: deborah.dewyea@navy.mil. All responsible sources may submit a quotation which, if received in a timely manner, shall be considered by the agency. Closing date is 09 July 2012.