Computer numerically controlled turning center

Added: May 29, 2008 12:33 pm Modified: May 29, 2008 1:57 pmTrack Changes Furnish/Install one (1) Computer Numerically Controlled (CNC) Turning Center of a chucking type, capable of performing multiple machining operations on the face and periphery of a work piece in one chucking. The various operations performed include contour turning and boring, facing, and threading with accessories and equipment. This is an UNRESTRICTED procurement. North American Industry Classification System Code is 333512. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c); therefore hardcopies will not be provided. Proposals submitted must be in electronic format as stated in the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.procnet.anad.army.mil (Doing Business with Us). Estimated issue date is 5 June 2008. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Wanda Adams, 256-235-6319, E-mail: wanda.adams@us.army.mil.

Furnish/Install one (1) Computer Numerically Controlled (CNC) Plasma Burning Table. The machine shall be new and one of the manufacturers current models capable of cutting material in accordance with the requirements. The machine shall be all purpose and capable of performing intricate shape and straight line cutting operations using a computer numerically controlled (CNC) coordinated drive system for the combination of transverse and longitudinal movement. The machine shall be capable of multiple torch operation. The design shall be such as to provide convenient, efficient, and safe operation with minimum maintenance. All structural components shall be designed to withstand operating conditions at maximum capacity while maintaining the accuracies specified. All parts subject to wear, breakage, or distortion shall be easily accessible for adjustment, replacement and repair. This is an UNRESTRICTED procurement. North American Industry Classification System Code is 333512. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c); therefore hardcopies will not be provided. Proposals submitted must be in electronic format as stated in the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.procnet.anad.army.mil (Doing Business with Us). Estimated issue date is 5 June 2008. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Wanda Adams, 256-235-6319, E-mail: wanda.adams@us.army.mil..

Added: May 29, 2008 12:33 pm Furnish/Install one (1) Computer Numerically Controlled (CNC) Plasma Burning Table. The machine shall be new and one of the manufacturers current models capable of cutting material in accordance with the requirements. The machine shall be all purpose and capable of performing intricate shape and straight line cutting operations using a computer numerically controlled (CNC) coordinated drive system for the combination of transverse and longitudinal movement. The machine shall be capable of multiple torch operation. The design shall be such as to provide convenient, efficient, and safe operation with minimum maintenance. All structural components shall be designed to withstand operating conditions at maximum capacity while maintaining the accuracies specified. All parts subject to wear, breakage, or distortion shall be easily accessible for adjustment, replacement and repair. This is an UNRESTRICTED procurement. North American Industry Classification System Code is 333512. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c); therefore hardcopies will not be provided. Proposals submitted must be in electronic format as stated in the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.procnet.anad.army.mil (Doing Business with Us). Estimated issue date is 5 June 2008. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Wanda Adams, 256-235-6319, E-mail: wanda.adams@us.army.mil.