Composite Layup Tooling to be Fabricated
Closed Pre-Solicitation Posted
- Solicitation number
- 80NSSC246311
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333511 Industrial Mold Manufacturing
- PSC
- R499 Support- Professional: Other
- Place of performance
- Greenbelt, Maryland 20771, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
Paragraph 1:
NASA/NSSC has a requirement for Composite Layup Tooling to be Fabricated in support of the Thermoplastic Development for Exploration (TDEA) project. NASA/NSSC intends to issue a sole source contract to North Coast Tool & Mold Corp dba Applied Composites under FAR 13.106-1(b)(1)(i). The composite layup tooling is required to be delivered to the National Institute of Aviation Research (NIAR) for development and fabrication of thermoplastic fiber placement and composite consolidation. All project milestones must be completed by 9/2024, and orders greater than 10 weeks will prevent the TDEA project from completing planned work in FY2024. Interested organizations may submit their capabilities and qualifications to the identified points of contact by 4/19/2024, and the Government will evaluate the responses to determine if this procurement should be conducted on a competitive basis.
Paragraph 2:
This procurement is not set aside. The NAICS Code is 333511. NASA/NSSC has identified North Coast Tool & Mold Corp dba Applied Composites as the sole provider of the required Composite Layup Tooling. The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. No specific award value or budget range was provided in the notice.
Notice text
NASA/NSSC has a requirement for Composite Layup Tooling to be Fabricated.
NASA/NSSC intends to issue a sole source contract to North Coast Tool & Mold Corp dba Applied Composites 4605 Spring RD, Cleveland, Ohio 44131-1021 under the authority of FAR 13.106-1(b)(1)(i). It has been determined that North Coast Tool & Mold Corp is the sole provider of Composite Layup Tooling to be fabricated
Thermoplastic Development for Exploration (TDEA) project requires composite layup tooling to be fabricated and delivered to the National Institute of Aviation Research (NIAR) for development and fabrication of thermoplastic fiber placement and composite consolidation. TDEA project defined milestones, all project milestones must be completed by 9/2024 and tooling orders greater than 10 weeks will prevent TDEA from completing planned work in FY2024.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 333511
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 11:59 a.m. Eastern Standard Time on 4/19/2024.
Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable.
The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Primary Point of Contact:
Kathi Thomas
Purchasing Agent
katheryn.a.thomas@nasa.gov
Secondary Point of Contact:
Tiffany Neal
Contracting Officer
tiffany.neal@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| INRODES Supplemental RDRE TCA Hardware | Shared Services Center | No set-aside | |
| Portable CNC plasma and oxy-fuel cutting system | Shared Services Center | No set-aside | |
| HAAS CNC Machine | Shared Services Center | No set-aside | |
| RTD Embedded Technologies | Shared Services Center | No set-aside | |
| Perishable tooling for outer wing panel (OWP) aileron hinge replacements | Naval Air Warfare Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity