Compact High Energy Density Capacitors For Pulsed Field X-Ray Generators
Open Pre-Solicitation Posted
- Solicitation number
- DTR27TZ02-NV003
- Agency
-
Defense Threat Reduction Agency
Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Robert Lloyd robert.l.lloyd40.mil@mail.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Defense Threat Reduction Agency is preparing to procure ultra-compact, high-voltage, high energy density capacitors and related advanced dielectric materials for portable X-ray radiographic imaging systems, with responses due January 6, 2027. The opportunity is set aside for Total Small Business and is issued as DoD STTR Phase I topic DTR27TZ02-NV003, under the Materials and Sensors technology areas. The notice was posted November 4, 2026, and is filed under NAICS 541715 and PSC AC12.
Required capabilities include preserving dielectric performance and high-voltage hold-off at reduced dimensions, achieving robust voltage reversal tolerance for Marx generator topologies, maintaining long operational lifetimes under pulsed conditions with repetition rates up to 100 Hz, and attaining high manufacturing yields with consistent quality. Designs must be ruggedized for field use in man-portable or small unmanned systems. The topic is ITAR-controlled and carries a CMMC Level 1 requirement.
Notice text
DoD STTR topic DTR27TZ02-NV003
Component: DTRA
Command: DTRA
Phase: STTR Phase I
Technology Areas: Materials; Sensors
Focus Areas: Advanced Materials; Directed Energy (DE); Microelectronics
Keywords: Pulsed power; dielectric materials; capacitors; Marx generators; portable X-ray; radiography; X-ray generators; radiographic imaging; electronics; material science; high energy density; voltage reversal
ITAR: Yes
CMMC: Level 1
Objective:
DTRA seeks ultra-compact, high-voltage, high energy density, capacitors and related advanced dielectric materials to support the development of advanced portable X-ray radiographic imaging systems.
Description:
High energy density capacitors and their constituent dielectrics are vital components for multiple DoW capability needs for high voltage power supplies, Marx generators, high-power microwave sources, and other pulsed-power technologies. The Missile Defense Agency, ONR, NASA and other government agencies have funded efforts into high energy density capacitors for a variety of applications.1 However, it is still very challenging to fabricate high energy density capacitors that reliably meet ultra-compact size constraints for miniaturized high voltage pulse power applications and in a ruggedized field-use system.
Recent prototype development of compact pulsed X-ray generators for portable radiographic imaging applications has underscored the difficulty of scaling capacitor technologies originally developed for larger directed energy and pulsed power systems down to the ultra-compact sizes needed for man-portable or small unmanned systems. Key challenges include preserving dielectric performance and high-voltage hold-off at reduced dimensions, achieving robust voltage reversal tolerance essential for Marx generator topologies, maintaining long operational lifetimes under pulsed conditions with repetition rates up to 100 Hz, and attaining high manufacturing yields with consistent quality for reliable field deployment. This topic specifically targets the development of reliable fabrication processes and advanced dielectric materials to overcome these miniaturization and ruggedization barriers for X-ray generator pulsed power applications.
DTRA seeks to develop reliable and efficient fabrication and production processes for compact high energy density capacitors.
The solution must meet the following minimum specifications:
- Outer Dimensions: No larger than 2 inches x 1 inch x 0.5 inch
- Voltage Rating: 100kV*
- Capacitance: ≥ 2nF
- Voltage Reversal Tolerance: 80%*
- Operating Environment: Dielectric Liquid or Pressurized Gas (e.g., such as SF6)
- Operating Temperature: Capable of meeting MIL-STD
- Ability to survive commercial requirements for shock and vibration (i.e. rough handling)
- Lifetime: Greater than 100,000 full-charge cycles
- Duty cycle: Up to 100 Hz
- Charge/Discharge time: Charging order of 10s of microseconds, discharge order of few nanoseconds
*Note: Operating voltage and voltage reversal are the highest priority specifications. DTRA may consider small deviations from the other minimum specifications (e.g. size) if the solution is capable of approaching or meeting the objective voltage and voltage reversal specifications below.
Objective specifications:
- Voltage Rating: 250kV
- Capacitance: ≥ 10nF
- Capacitance Tolerance: ±10%
- Voltage Reversal Tolerance: 100%
- Operating Temperature: Capable of meeting MIL-STD
- Vibration: Capable of meeting MIL-STD
- Lifetime greater than full-charge 1,000,000 cycles
This effort shall develop a reliable manufacturing process for high energy density capacitors while maintaining the performance parameters outlined above. The proposed effort will require that developed capacitors be tested and validated in Phase 2.
Phase I:
Conceptualizing capacitor design type and proof of principle of manufacturing process. In Phase 1 of this effort, a suitable capacitor type and design will be chosen to meet the above-listed performance parameters. This decision should be informed by extensive modeling, simulation, and market research, and guided by availability of materials needed. Preference is indicated for domestically available materials. Note that while temperature and vibration ruggedization are to meet MIL-STD ranges, formal testing and certification to the MIL-STD specifications is not required during this phase. Following the design decision, material samples will be fabricated and tested to validate performance. Evaluation of success will be weighted towards feasibility of materials to achieve the highest priority specifications: operating voltage and voltage reversal. Additionally, the offerors will define a detailed plan for a scalable prototype manufacturing process to be executed in Phase II, including equipment needs, quality control steps, and risk mitigation. The designed process should demonstrate progress towards production of capacitors that meet the defined performance criteria with particular attention to overcoming the miniaturization and reliability challenges associated with scaling from larger directed energy capacitor designs. The Phase 1 final report should include: details for chosen capacitor design along with relevant modelling, simulation, and market research results, details of the chosen manufacturing process, and test and evaluation results of the proof-of-principle capacitor performance (including but not limited to voltage reversal testing representative of Marx generator operation) and percentage of fabricated material samples that meet specifications via the initial process.
Phase II:
Manufacturing process execution, refinement, and scaling up of output. In Phase 2 of this effort, the manufacturing process designed in Phase 1 will be executed, refined, and scaled up with the goal of reliable capacitor output with high percentage of capacitors meeting performance specifications. The goal of this phase of the effort should be a manufacturing process with output and reliability of produced components that meet a TRL 5. The final report for Phase 2 will include final details of the optimized manufacturing process and throughput, output capacitor specifications, and percentage of output that meets design specifications. Capacitors will be delivered to DTRA by the end of Phase II for evaluation in a representative pulsed power system for X-ray generation, as follows: • Year 1: Fabrication of 10 prototype capacitors for testing, validation and refinement. • Year 2: Final deliverable of up to 10 fully compliant prototype capacitors to DTRA.
Phase III:
Optional phase that will continue scale up and output of capacitor manufacturing process. The goal of this phase 3 work will be to produce capacitors that exceed the above listed performance specification and continue to increase the output of capacitor manufacturing while maintaining high-percentage of capacitors meeting performance specifications.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Remote UAS-based X-Ray for Device Assessment in CBRNE Environments | Defense Threat Reduction Agency | Total Small Business | |
| Domestic Scalable Growth Of Large-Format Pixelated CZT Crystals For Advanced Radiation Detection | Defense Threat Reduction Agency | Total Small Business | |
| Advanced Reserve Power Source Technologies | Air Force Materiel Command | Total Small Business | |
| UAS-based Precision Aim for Device Render Safe in CBRN Environments | Defense Threat Reduction Agency | Total Small Business | |
| Domestic Fabrication Of High-Purity Precursor Materials For Advanced Radiation Detection Scintillator Crystals | Defense Threat Reduction Agency | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity