Cofferdam Protective Enclosure

This notice is a Sources Sought Notice for a requirement at the Portsmouth Naval Shipyard.  This notice is being issued to determine interested vendors and to help establish an appropriate set–aside if applicable.  Please note that this is NOT a Request For Quotation (RFQ) and submission of your company’s interest will not result in a contract, and may not result in your company being considered for a set–aside or bidders list for the RFQ.  This sources sought notice is for market research purposes only. Vendors that are able to provide this material need to provide the following in an e-mail to Emily.Kritzman@dla.mil.

RESPONSES MUST INCLUDE: 
1. Vendor’s name, address, phone number, fax number, and e-mail address.
2. Vendor’s Cage Code (SAM).
3. Vendor’s size status (SB, SDVOSB, 8a, HUBZone, WOSB, etc.,).
4. If the vendor is not the actual manufacturer, the actual manufacturer’s name, Cage Code, and size status is required.
5. Statement explaining capabilities, including, but not limited to, detailed literature, specific procedures, and capabilities of meeting the specifications and all Level 1 requirements.

***
Information provided in response to this notice must include sufficient technical information for an evaluation to be conducted, to determine if a source is capable. Responses that do not include technical information may be determined unresponsive and/or not capable. 

***
The Portsmouth Naval Shipyard is seeking sources capable of providing the following:
QTY 1 each: 
Cofferdam Protective Enclosure, in accordance with Drawing DWG S86111840 (Distribution D; requires approved DD2345 to receive drawing). 

***

SECURITY AGREEMENT AND APPROVED DD2345 MUST BE RECEIVED BEFORE DRAWING CAN BE DISTRIBUTED.
***

Notional Note: (This note is notional only, and is not an official specification; it is only to assist any interested party in determining if they might be capable and/or interested enough to request the drawing) 
This requirement is for one enclosure: footprint is characterized as an isosceles trapezoid (same shape as the cofferdam upon which it will sit), made up of 2 asymmetrical halves, with a walkway along the longest of the parallel sides.
-Footprint: Appox. 28’x26’x31’x26’, w/ 3’ x 32’ walkway 

                       28’
        ----------------------------
        /                                          \
26’  /                                            \      26’
       /                                             \
       /                                              \
       /                                               \
      /                                                 \
      /                                                  \
      -----------------------------------
      |____________________|

                           31’

-Height: Approx. 8.5-9’ tall, with ladder, and railings at perimeter; enclosure will have a closed roof. 

*End Notional Note*

***

There is no anticipated date for a solicitation at this time.