CNC Lathe

LATHE
The only commercially available Turning Center with Live Tooling found to have all the Primary
and Secondary Requirements described below combined into one machine is the Nakamura – Tome 
WT300MMY-F014.

Primary Requirements for the CNC Turning Center with Live Tooling:
•  Tools driven by direct drive motors built into the turrets
•  25 HP A2-8 Spindle on both Right and Left
•  4” (102mm) Bar capacity on both spindles
•  Fully closed loop control for X, Y & Z axes on both turrets having direct scale (magnetic) 
feedback.

•
•  Fit within the maximum available area of 18 ft - 0 inches x 18 ft - 0 inches
•  Positioning accuracy of less than .0002 inch
•  Airbag Collision Protection (Nakamura Only)

Secondary Requirements for the CNC Turning Center With Live Tooling:

•  Basic Machine
o  2-turret specification (BMT 65)
•  Control
o  Human Machine Interface (HMI) Operating Terminal with 19.0" touch control display screen and 
Power failure Package.
o  Fanuc F32iB CNC controller software
o  Dual USB Ports
o  Maintenance + Alarm Trouble Shooting
o  Remote service capability
o  Machine data connector
o  Production package - high speed canned cycles
o  Ethernet
•  Screen Text
o  Screen display English
o  Language on operating system screen: English
o  Language on NC Screen: English
o  Language on PC Screen: English
•  Spindle
o  Left Spindle (Main Spindle)
■  Through-spindle hole dia. 102 mm
■  Bar stock machining capacity dia. 4”
■  Maximum spindle speed 2500 rev/ min
■  Output 30 min continuous 15/18 kW
■  Continuous Torque Rating (133 lb/ft)
■  12” Chuck for left spindle (main spindle)
■   Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in.
■  Full C-axis (CF-Control)
■  C-Axis Clamp Braking Torque (188 lb/ft)

■  Polar Coordinate Interpolation
■  Cylindrical Interpolation

o  Right Spindle (Sub Spindle)
■  Through-spindle hole dia. 102 mm
■  Bar stock machining capacity dia. 4”
■  Maximum spindle speed 2500 rev/ min
■  Output 30 min continuous 15/18 kW
■  Continuous Torque Rating (133 lb/ft)
■  12” Chuck for right spindle (sub spindle)
■   Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in.
■  Full C-axis (CF-Control)
■  C-Axis Clamp Braking Torque (188 lb/ft)
■  Polar Coordinate Interpolation
■  Cylindrical Interpolation

•  Turrets
o  Turret 1:
■  24 station BMT 65
■  12 Station Live Tool
■  Servo Drive Index
■  Y axis
■   Rotating Tool Spindle Speed 3600 rev/ min
■   Rotating tool 5.5/3.7 Kw – 7.5 HP
o  Turret 2:
■  24 station BMT 65
■  12 Station Live Tool
■  Servo Drive Index
■   Rotating Tool Spindle Speed 3600 rev/ min
■   Rotating Tool 5.5/3.7 Kw – 7.5 HP

•  Coolant Supply / Chip Removal
o  Water-Soluble coolant
o  Chip conveyor (right discharge)
■  Filtration Accuracy: 50 um approximately 90%
■  Carrying Amount
✓  Long Chip: 794 L/h
✓  Short Chip: 13 L/h
o  High pressure coolant system for two turret specifications
■  Chip Blaster F2-60
■  One pump for each turret (24 HP)
■  92.5 Gallon Tank
•  Measuring / Monitoring
o  Manual in-machine tool pre-setter (removable type, Left Spindle and Right Spindle)
o  Full closed loop control for X axis (turret 1) direct scale feedback, resolution 0.01 um
o  Full closed loop control for X axis (turret 2) direct scale feedback, resolution 0.01 um

o  Full closed loop control for Z axis (turret 1) direct scale feedback, resolution 0.01 um
o  Full closed loop control for Z axis (turret 2) direct scale feedback, resolution 0.01 um
o  Manual Machine tool presetter (Left Spindle side)
o  Manual Machine tool presetter (Right Spindle side)
•  Automation
o  Signal lamp 4 colors (red, yellow, green, blue)
o  1/F for exchanging control signals between the machine and peripheral equipment using 
EtherNet/IP
o  Interface for Bar feeder (EtherNet/lP Interface) with terminal block for power supply
•  Power Requirements
o  220 volts, 3 phase, 72 KVA
•  Control
o  High Speed Canned Cycle
o  Optional Block Skip (soft key type 2-9)
o  X axis movement direction compliant with ISO standard
•  Construction
o  Bar feeder
o  Spindle Liners 1pc for 1.00" RS
o  Coolant collector extension
•  Tools driven by direct drive motors built into the turrets
•  Fit within the maximum available areas of 18 ft - 0 in x 18 ft - 0 in
•  Positioning accuracy of less than .0002 inch
•  Special Construction
o Bar Feeder

Additional Parts / Products:

LNS TurboChip Conveyor Hinge Belt Type. Right Discharge LNS Quick Load Servo 105+ Barfeeder. ¼” to 
4-1/8”
LNS Quick Load Servo Barfeeder Installation
Steel Spindle Liners for Main Spindle 3/8” – 4” 91/4” Increments Qty 13) Steel Spindle Liners for 
Second Spindle 3/8” – 4” 91/4” Increments Qty 13) Samchully JB-M312 First Spindle
Samchully JB-M312 Second Spindle
High Pressure Coolant both turrets and spindle flush Chip Blaster F2-60

WTO Rotary Tools:

48-107658-HP - O.D. Cutting Holder - (4 ea.) 48-107660 – Combination Tool Holder - (4 ea.) 
48-100204 – Cut-off Holder - (2 ea.)
48-102279R – Cut-off Holder Right - (2 ea.) 48-102279l – Cut-off Holder Left - (2 ea.)
420132020 – Straight Drill/Milling Unit, ER32 QF, IC-EC - (4 ea.) 420132019-65 – Straight 
Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532026-65 – Face Mill/ Drill Unit, ER32 QF, IC-EC - (4 
ea.) 420532025-65 – Face Mill/ Drill Unit, ER32 QF, EC - (4 ea.)

410120030-65 – Straight Offset Drill/Milling Unit, ER32, EC - (4 ea.)
420532043-65 – Right Angle Drill/Milling Unit, Both Sides, ER32 QF, EC - (4 ea.) 410120031-65 – 
Straight Offset Drill/Milling Unit, ER32, IC-EC - (4 ea.) 410113002-65 – Straight Offset 
Drill/Milling Unit, ER20, EC - (4 ea.)
410120023-65 – Straight Offset Drill/Milling Unit, ER32, EC - (4 ea.) 410113003-65 – Straight 
Offset Drill/Milling Unit, ER20, IC-EC - (4 ea.) 420225014-65 – Right Angle Drill/Milling Unit, 
ER25, EC - (4 ea.) 420525015-65 – Right Angle Drill/Milling Unit, ER25 QF, IC-EC - (4 ea.) 
420532031-65 – Face Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532032-65 – Face Drill/Milling 
Unit, ER32 QF, IC-EC - (4 ea.) 411010000-65 – Adjustable Angle Drill/Milling Unit, ER16, EC - (2 
ea.)
411010001-65 – Adjustable Angle Drill/Milling Unit, ER16, IC-EC - (2 ea.) 411007001-65 – Adjustable 
Angle Drill/Milling Unit, ER11, EC - (2 ea.) 411007000-65 – Adjustable Angle Drill/Milling Unit, 
ER11, EC - (2 ea.) 411500001-65 – Offset Slitting Saw Unit, Type 14-2 - (2 ea.)
414532003-65 – Broaching Unit, TN765050 - (1 ea.)

Reduction Sleeve 1-1/2” (2 Sets)

2400150038 – 3/8”
2400150050 – 1/2”
2400150063 – 5/8”
2400150075 – 3/4”
2400150088 – 7/8”
2400150100 – 1.0”
2400150125 – 1-1/4”

ER 11 Collets (2 Sets)

190011000 – (.276-.020)

ER 16 Collets (2 Sets)

190016000 – (.394 -.020)

ER 20 Collets (2 Sets)

190020000 – (.512-.039)

ER 25 Collets (2 Sets)

190025000 – (.630-.039)

ER 32 Collets (2 Sets)

190032000 – (.787-.079)

ER 11 Collets Sealed (2 Sets)

191011013 – (.125)
191011019 – (.188)

191011025 – (.25)

ER 16 Collets Sealed (2 Sets)

191016013 – (.125)
191016019 – (.188)
191016025 – (.25)
191016031 – (.313)
191016038 – (.375)

ER 25 Collets Sealed (2 Sets)

191016013 – (.125)
191016019 – (.188)
191016025 – (.25)
191016031 – (.313)
191016038 – (.375)
191016044 – (.438)
191016050 – (.5)
191016056 – (.563)
191016063 – (.625)

ER 32 Collets Sealed (2 Sets)

191032013 – (.125)
191032019 – (.188)
191032025 – (.25)
191032031 – (.313)
191032038 – (.375)
191032044 – (.438)
191032050 – (.5)
191032056 – (.563)
191032063 – (.625)
191032075 – (.75)

Interchangeable Milling Arbors (2 Sets)

160015142 – (.625)
160019142 – (.75)
160023142 – (.875)
160025142 – (.1.0)

ER 25 QF Collet Chuck Adapter (2 Sets)

320025010 – (ER16)
320025013 – (ER20)
320025016 – (ER25)
ER 25 QF Collet Chuck Adapter Short (2 Sets)

320025010-07 – (ER16)

320025013-09 – (ER20)

ER 25 QF Collet Chuck Adapter Long (2 Sets)

320025007-40 – (ER11)
320025010-50 – (ER16)

ER 25 QF Weldon/Whistle Notch Shank Adapter (2 Sets)

3201250250 – (.25)
3201250312 – (.313)
3201250375 – (.375)
3201250500 – (.5)
3201250625 – (.625)
3201250750 – (.75)

ER 25 QF Combination Mill Adapter (2 Sets)

3202250750 – (.075)
3202251000 – (.1.0)
ER 25 QF Blank (5 ea.)

329025000

ER 25 QF Protection Cover (10 ea.)

337025000

ER 25 QF Master Gauge (1 ea.)

339125000

ER 32 QF Collet Chuck Adapter (2 Sets)

320032013 – (ER20)
320032016 – (ER25)
320032020 – (ER32)

ER 32 QF Collet Chuck Adapter Short (2 Sets)

320032013-07 – (ER20)
320032016-07 – (ER25)

ER 32 QF Collet Chuck Adapter Long (2 Sets)

320032007-50 – (ER11)
320032010-60 – (ER16)

ER 32 QF Weldon/Whistle Notch Shank Adapter (2 Sets)

3201320250 – (.25)
3201320312 – (.313)
3201320375 – (.375)
3201320500 – (.5)
3201320625 – (.625)
3201320750 – (.75)

ER 32 QF Combination Mill Adapter (2 Sets)

3202320750 – (.075)
3202321000 – (1.0)
3202321250 – (1.25)

ER 32 QF Blank (5 ea.)

329032000

ER 32 QF Protection Cover (10 ea.)

337032000

ER 32 QF Master Gauge (1 ea.)

339132000
One Hand Wrenches/Sets

0067732000 (5 ea.)
0067725001 (5 ea.)

00675000958 (5 ea.)
00675000591 (5 ea.)
00675000515 (5 ea.)
00675000902 (5 ea.)
00675000914 (5 ea.)
00675000448 (5 ea.)

Installation: Contractor shall provide personnel to oversee equipment assembly, installation, 
startup and test prior to equipment acceptance and commissioning.

Calibration/ Setup: Contractor personnel shall perform all calibration, verification and 
performance testing of the equipment after installation and demonstration of proper operation prior 
to Government customer providing acceptance.

Training: Contractor shall provide on-site orientation training for this equipment.

NOTES

•  FANUC Brand Drives and Control are a must to coincide with current programming and minimize 
training.
•  WTO live Tooling is the current brand we use in the shop.
 

Awarded contract W519TC26PA012 to MARUKA U.S.A. INC for 864099.00 on 2025-10-22.