CM21182006, 2 NSNs, 48--VALVES

Project CM21282006 is for two (2) NSNs.  Each NSN has an estimated annual demand of the following:

NSN                                       ADQ

4810-01-084-5981                   207

4820-01-059-2297                    43

This acquisition is for a Fixed Price, Indefinite Quantity Contract (IQC). FAR Part 15 – Contracting by Negotiation. The proposed procurement contains a one-year (1-year) base period plus two (2) option years. The total contract period shall not exceed three (3) years.  Award will be made on an ALL OR NONE BASIS per NSN for items supplied covered under this contract.

Copies of the solicitation is available at the https://www.dibbs.bsm.dla.mil/RFP/ and available approximately 15 days after this notice is published in SAM.gov.

The approved sources are as follows:

NSN                                     CAGE              COMPANY NAME                 PART NUMBER     _

4810-01-084-5981               86090                    Eaton Corporation                   61269

4810-01-084-5981               92003                    Parker Hannifin                    2820124-102

4810-01-084-5981               0TR84              United Valve Company             2820124-102

4810-01-084-5981               1523A                  TAT Technologies                     5116-2

4820-01-059-2297               86090                    Eaton Corporation                   60840

4820-01-059-2297               92003                    Parker Hannifin                     2830157-102

This solicitation is a Total Small Business set-aside. All offers shall be in the English language and in US dollars.

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation.

The solicitation shall be available in DIBBS on or about March 22, 2022. All responsible sources may submit an offer/quote which shall be considered.

(X) PART NUMBER: Specifications, plans, or drawings related to the procurement described are not available and cannot be furnished by the Government.

(X) 1 100% Set-Aside for Small Business

(X) 12 Trade Agreements Acts

(X) 26 Commercial Notice (when the Government does not intend to use Part 12, Commercial Acquisition Procedures)(FAR 5.206(e)(4))

(X) The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation.

-
*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:010845981

     VALVE,FUEL SHUT-OFF
     REFERENCE NUMBER:RQ032
     REFERENCE NUMBER:RD002
     REFERENCE NUMBER:RP001
     REFERENCE NUMBER:RA001
     REFERENCE NUMBER:RQ002
     REFERENCE NUMBER:RQ011
     Mark per MIL-STD-130
     REFERENCE NUMBER:CS120
     REFERENCE NUMBER:CS187
     REFERENCE NUMBER:ZD025

     CRITICAL APPLICATION ITEM

     PARKER HANNIFIN CORPORATION DIV 92003 P/N 2820124-102
     UNITED VALVE COMPANY, DIV OF FEDERAL 0TR84 P/N 2820124-102
     TAT TECHNOLOGIES LTD. 1523A P/N 5116-2
     EATON CORPORATION 86090 P/N 61269

     IAW BASIC DRAWING NR 72429 50295
     REVISION NR L   DTD 07/11/1984
     PART PIECE NUMBER: P/N 50295-5

     IAW REFERENCE DRAWING NR 72429 43.603
     REVISION NR E   DTD 08/26/1988
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 72429 50295
     REVISION NR     DTD 07/03/2019
     PART PIECE NUMBER:

     IAW REFERENCE SPEC NR MS33786B NOT 1
     REVISION NR B   DTD 09/14/2018
     PART PIECE NUMBER:

     IAW REFERENCE NON GOVT STD NASM21209
     REVISION NR     DTD
     PART PIECE NUMBER:

     IAW REFERENCE NON GOVT STD SAE AS4395B
     REVISION NR     DTD
     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

NSN:010592297

     VALVE,SAFETY RELIEF
     REFERENCE NUMBER:RP001

     REFERENCE NUMBER:RQ032
     REFERENCE NUMBER:RD002
     REFERENCE NUMBER:RA001

     REFERENCE NUMBER:RQ002

     REFERENCE NUMBER:RQ011

     BURST PRESSURE 60 PSI.
     END ITEM -ACFT, TYPE F-16A, B, C AND D.

     REFERENCE NUMBER:CS241

     REFERENCE NUMBER:ZD025

     CRITICAL APPLICATION ITEM

     PARKER HANNIFIN CORPORATION DIV 92003 P/N 2830157-102
     EATON CORPORATION 86090 P/N 60840

     IAW REFERENCE DRAWING NR 81755 16VP038
     REVISION NR T   DTD 12/16/2002
     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

************************************************************************************************************

                                                    GLOSSARY

************************************************************************************************************
PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
     All DLA Master List of Technical and Quality Requirements take
      precedence over ASTM D3951.
     Mark and label all packaging and packing in accordance with MIL-STD-129.
     The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
      as specified in the contract/purchase order.
     PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
      REQUIREMENTS FOR PROCUREMENT
ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER RQ032

     RQ032: EXPORT CONTROL OF TECHNICAL DATA

     This item has technical data some or all of which is subject to
     export-control of either the International Traffic in Arms regulations
     (ITAR) or the Export Administration Regulations (EAR), and cannot be
     exported without prior authorization from either the Department of State
     or the Department of Commerce. Export includes disclosure of technical
     data to foreign persons and nationals whether located in the United
     States or abroad. This requirement applies equally to foreign national
     employees and U.S. companies and their foreign subsidiaries. DFARS
     252.225-7048 is applicable to this data.

     The Defense Logistics Agency (DLA) limits distribution of export-control
     technical data to DLA contractors that have an approved US/Canada Joint
     Certification Program (JCP) certification, have completed the
     Introduction to Proper Handling of DOD Export-Controlled Technical Data
     Training and the DLA Export-Controlled Technical Data Questionnaire
     (both are available at the web address given below), and have been
     approved by the DLA controlling authority to access the
     export-controlled data. Instructions for obtaining access to the
     export-controlled data can be found at:
     https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

     To be eligible for award, offerors and any sources of supply proposed
     for use are required to have an approved JCP certification and have
     been approved by the DLA controlling authority to access
     export-controlled data managed by DLA. DLA will not delay award in
     order for an offeror or its supplier to apply for and receive approval
     by the DLA controlling authority to access the export-controlled data.

     REFERENCE NUMBER RD002

     RD002, COVERED DEFENSE INFORMATION APPLIES

     REFERENCE NUMBER RA001

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
     AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ002

     RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

     REFERENCE NUMBER RQ011

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

     REFERENCE NUMBER CS241

     NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
     REQUIRES ENGINEERING SOURCE APPROVAL BY THE
     GOVERNMENT DESIGN CONTROL ACTIVITY.

     REFERENCE NUMBER ZD025

     MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
     NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
     CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
     UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
     USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
     INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
     AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
     PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
     CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
     A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
     MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

     REFERENCE NUMBER CS120

     NOTE:  THE CITED DRAWING IS A SOURCE CONTROLLED
     DRAWING AND AS OF THE DATE OF THIS SOLICITATION
     ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
     BEEN APPROVED.  EVEN THOUGH SOURCES AND APPROVED
     PART NUMBERS ARE PROVIDED, THE ITEMS
     FURNISHED MUST MEET THE REQUIREMENTS OF THE
     CITED DRAWING.  OFFERORS WHO ARE INTERESTED IN
     QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
     ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
     ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
     DRAWING.
     ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
     THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
     THIS TIME.

     REFERENCE NUMBER CS187

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
     USED NOR INCORPORATED IN ANY ITEMS TO BE
     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
     SPECIFICATION REQUIREMENTS.