Circuit Card Assembly
Closed Pre-Solicitation Posted
- Solicitation number
- W31P4Q-25-R-0074
- Agency
-
ACC Redstone
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 334412 Bare Printed Circuit Board Manufacturing
- Place of performance
- United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Contracting Command at Redstone Arsenal is conducting market research to identify small businesses capable of supplying three Circuit Card Assemblies (NSN: 5998-01-723-1107) for the Calibration Weapon System. The specific part number is 4610M-X180, and the procurement is seeking an authorized distributor or manufacturer traceable to Transmille Calibration, Inc. Interested small businesses must submit a written response by 4 pm CST on June 23, 2025, which includes company details, small business status confirmation, a two-page capability statement, evidence of authorized distribution, lead time estimates, and relevant past performance. The government will use these submissions to evaluate potential sources for a firm fixed-price contract, with the full Request for Quote (RFQ) expected to be issued on or about July 1, 2025. Submissions should be sent electronically to Lindsay Jennings, the Contracting Specialist, via email.
The opportunity is set aside exclusively for small businesses within the NAICS 334412 category (Bare Printed Circuit Board Manufacturing), with a small business size standard of 750 employees. The contract specifically requires acquisition from the actual manufacturer, with no data available and reverse engineering explicitly prohibited. The procurement is for a commercial, non-developmental, off-the-shelf item to be delivered F.O.B. Destination to Tobyhanna, Pennsylvania. While no specific award value is mentioned, the quantity is fixed at three units, and the government emphasizes that this pre-solicitation notice is for informational purposes only and does not guarantee a contract award. Potential offerors are advised that no funds are available for response preparation, and submissions are voluntary with no commitment from the government.
Notice text
The U.S. Government is issuing this sources sought as a means of conducting market research to identify small businesses capable of supplying a one-time buy of Circuit Card Assembly, NSN: 5998-01-723-1107, to support the Calibration Weapon System (FQ). This notice is issued solely for planning purposes and does not constitute a Request for Quote (RFQ). The RFQ will be issued on or about 1 July 2025.
This requirement is to establish a firm fixed price contract for the following: NOUN: Circuit Card Assembly, PRON: D15T1173D1, NSN: 5998-01-723-1107, P/N: 4610M-X180, Quantity: 3 each
F.O.B. Destination with delivery to the address below.
SR W1A8 DLA DIST-TOBYANNA
GIBBS AND FIFTH STREETS
WAREHOUSE 6 BAY 4
TOBYHANNA, PA, 18466-5059
SCOPE OF REQUIREMENT
Noun: Circuit Card Assembly
Approved Source: Transmille Calibration, Inc. (Cage Code: 7BU72)
Contract Type: Firm Fixed Price
PRON: D15T1173D1
NSN: 5998-01-723-1107
Part Number: 4610M-X180
PSC Code: 5998
Estimated Quantity: 3
NAICS: 334412 – Small Business Size Standard: 750 Employees
AMC/AMSC: 4Z – Acquisition from the actual manufacturer is required. No data is available and reverse engineering is not permitted. This part is a commercial/non-developmental/off-the shelf item.
SUBMISSION INSTRUCTIONS
Interested small businesses should submit a written response including the following information:
1. Company name, address, point of contact, CAGE code, Unique Entity Identifier (UEI)
3. Confirmation of Small Business status under NAICS 334412
4. Brief Capability Statement (no more than 2 pages) addressing the ability to provide the item(s)
5. Evidence of being an authorized distributor or manufacturer traceable to Transmille Calibration Inc., (CAGE 7BU72)
6. Lead time and delivery estimates
7. Past performance or history supplying similar items (if applicable)
All communication should be submitted electronically to Lindsay Jennings, ATTN: CCAM-MLP Lindsay Jennings, Contracting Specialist via email at lindsay.d.jennings.civ@army.mil. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. No phone calls will be accepted, and no feedback will be provided regarding submissions.
The deadline for response is 4 pm CST, 23 June 2025.
DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP). IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES ARE NOT OFFERS, AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT BASED ON THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED IS VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ), INVITATION FOR BID (IFB), OR RFP, IF ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assembly | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity