Circuit Card Assembly
Closed Solicitation Posted
- Solicitation number
- FA820624Q0013
- Agency
-
Air Force Sustainment Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 334419 Other Electronic Component Manufacturing
- Place of performance
- Hill AFB, Utah 84056, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Air Force Sustainment Center is seeking to procure Circuit Cards (BCA) used in the Explosive System Circuit Test Set (ESCTS). The circuit cards are complex and contain many electronic components, some of which may be obsolete and require alternate components to be identified and verified for proper function. The supplier will need expertise in identifying and verifying alternate components, as well as the potential need to loan or lease an actual BCA from Hill AFB to assist in the manufacturing process. Key requirements include fitting and functioning properly within the ESCTS, and the BCA may need to be fit checked and tested at Hill AFB prior to acceptance.
This opportunity is set aside for small businesses. The primary NAICS code is 334419 - Other Electronic Component Manufacturing, and the PSC code is 5998-P - Electrical And Electronic Assemblies, Boards, Cards, And Associated Hardware. The contract is expected to be awarded on June 21, 2024, with performance at Hill AFB, Utah.
Notice text
The Air Force is looking to purchase Circut Cards (BCA) used in the Explosive System Circut Test Set (ESCTS). These circuit cards are complex and have many electronic components assembled to the circuit card boards including integrated circuit/chips. Due to the age of these BCA, it is expected that several of the electronic components will be obsolete and alternate components will need to be found to replace those obsolete components. This will require the supplier to have the expertise to find correct alternate components and then verify by test that those components function correctly. In addition to the engineering drawing the supplier may need the actual BCA from Hill AFB ICBM supply to help accomplish this difficult manufacturing of new BCA's therefore, a loan/lease of a BCA may be required. The primary purpose of the ESCTS is to verify and electronically test various hazardous systems circuits on Minuteman III ICBM missiles for proper function. The tests also check function of electronic interfaces between Aerospace Vehicle Equipment (AVE) and Operational Ground Equipment (OGE).
Performance requirements for these BCA are listed in the respective engineering drawing: ESCTS1310, ESCTS1420, ESCTS1430, and sub tier documents listed in the parts list/table. The BCA primary performance requirement is to fit and function properly in the ESCTS. BCA's manufactured by the supplier may need to be fit checked and tested in a ESCTS unit at Hill AFB for acceptable function prior to USAF acceptance of all BCA's and completion of the contract.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assemb | Naval Supply Systems Command | No set-aside | |
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assembly | Land and Maritime | Total Small Business | |
| Circuit card assembly | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity