Chassis

COMMERCIAL ITEM PROCUREMENT NOTICE - AWARD|4|||||

INSPECTION AND ACCEPTANCE - SHORT VERSION|8|X||X||||||

FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS-PROHIBITION (DEC 2023)|12|||||||||||||

THIS AMENDMENT IS BEING EXECUTED TO INCREASE THE QTY. THE QTY REQUIRED IS NOW 3 UNITS TO W25G1U. THE END DATE HAS ALSO BEEN EXTENDED TO DECEMBER 3, 2026. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME.

This requirement is being issued under SEPA/EAF Authority.

This procurement requires Higher Level Inspection.

1. All contractual documents (i.e. contracts, purchase orders, task orders,

Delivery orders, and modifications) related to the instant procurement are

considered to be "issued" by the government when copies are either deposited

in the mail, transmitted by facsimile, or sent by other electronic commerce

methods, such as email. The government's acceptance of the contractor's

proposal constitutes bilateral agreement to "issue" contractual documents as

detailed herein.

2. Drawings or technical data are not available for this item.

3. Delivery days_________aro.

4. Offer valid for _____ days.

5. When submitting quotes via EDI, make sure you specify any exceptions (i.e.

Mil specs/standards, packaging, I&A, packaging houses etc) or follow up with a

hardcopy of the exceptions. If nothing is indicated or received, award will

be based upon solicitation requirements. Changes or requests for changes

after award will have consideration costs deducted on modifications.

6. If you are not the manufacturer of the material you are offering, you must

state who the OEM is (cage GP1.1 code) and the part number you are offering.

7. Please provide an email address for follow up communications.

____________________________________________________________

8. It is recommended that vendors provide contact information to NAVSUP WSS

Mechanicsburg in order to receive automated notifications from Navy Electronic

Commerce Online (NECO) when contracts/modifications are issued by DLA Weapons Support JE2.1 Mechanicsburg and posted on EDA. To receive these notifications, contact:

NAVSUPWSS code 025, procurement systems design and contract support division

Via email at NAVSUPWSSITIMPHelpdesk@navy.mil. Please include the following

information with your request: CAGE code, company name, address and POC with

phone number and email address.

9. Contractors can view their orders, contracts and modifications at the

Electronic Document Access (EDA) web tool. This web tool is located at the

Procurement Integrated Enterprise Environment (PIEE) website. It is

recommended that the contractor register for EDA at https://piee.eb.mil/.

Click on new user and registration.

Any order resulting from this Request for Quotation will require electronic

submittal of Invoice and Receiving Report (COMBO) through PIEE-WAWF.

10. The following DLA Procurement Notes are applicable to this requirement:

E06 Inspection and Acceptance at Source (JUN 2018)

11. INSPECTION OF MATERIAL WILL BE AT (CAGE & ADDRESS):

______________________________________________________________

INSPECTION OF PACKAGING AND FINAL ACCEPTANCE OF MATERIAL WILL BE AT (CAGE &

ADDRESS):

______________________________________________________________

12. UCF SECTION F PRODUCTION FACILITY CHANGES

(a) The performance of any of the work contracted for in any place other than

that named in the contract is prohibited unless specifically approved by the

Contracting Officer. Written requests for a change in production facilities

must be submitted in writing to the Contracting Officer. Changes in production

facilities may be approved, provided:

(1) Performance by small business or in labor surplus areas as required by

the contract will not be changed;

(2) The change will not cause a delay in delivery or necessitate a change in

the purchase description;

(3) The free GP3.1 on board (f.o.b GP4.1 .) point is not changed; and

(4) Each request is supported by a price reduction of $250.00 to cover the

Government's administrative costs to process the change.

(b) The Government reserves the right to deny approval even if these four

elements are met.

\

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the CHASSIS .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order,

however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

DOCUMENT REF DATA=MIL-STD-130 | | |N |121116|A| | |

DOCUMENT REF DATA=ANSI/J-STD-001 | | |B |960801|A| | |

DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A| 1| |

DOCUMENT REF DATA=ISO9001 | | | |150915|A| | |

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The CHASSIS furnished under this

contract/purchase order shall be the design represented by Cage Code(s)

reference number(s). Cage _______ ref. no.

;0KPC5 CCHA40792-1;

3.2 Marking - This item shall be physically identified in accordance with MIL-STD-130.

3.3 Interchangeability - Interchangeability of parts, subassemblies, and assemblies shall conform to the following criteria:

Design tolerances - Design tolerances shall permit parts, subassemblies and assemblies to be used in their parent assemblies without regard to the source of supply or manufacturer. Parts, subassemblies and assemblies having the full range of dimensions

and characteristics permitted by the specification governing the part, subassembly or assembly shall be usable as replacement items without selection and without departure from the specified performance guidelines of the parent items.

Parts and materials - When permission is granted to use a nonstandard part or material because the exiting standard part or material is not available, the equipment shall be so designed that the nonstandard part or material and the standard part or

material are interchangeable. When the specification for the part or material contains substitutability or supersession information, the design shall permit the substitute or superceding parts or materials to be used interchangeably.

3.4 Workmanship - Workmanship for electronic equipment shall conform to the following criteria:

Cleaning - After fabrication, parts and assemblied equipment shall be cleaned of smudges, loose, spattered, or excess solder, weld metal, metal chips and mold release agents, or any other foreign material which might detract from the intended operation,

function, or appearance of the equipment.

Threaded parts or devices - Screws, nuts, and bolts shall show no cross threading, mutilation, or detrimental or hazardous burrs, and shall be firmly secured.

Bearing Assemblies - Bearing assemblies shall be free of rust, discoloration, and imperfections of ground, honed, or lapped surfaces. Conta cting surfaces shall be free of tool marks, gauge marks, nicks, or other surface-type defects. There shall be no

detrimental interference, binding, or galling.

Wiring - Wires and cables shall be positioned or protected to avoid contact with rough or irregular surfaces and sharp edges and to avoid damage to conductors or adjacent parts.

Shielding - Shielding on wires and cables shall be secured in a manner that will prevent it from contacting or shorting exposed current-carrying parts. The ends of the shielding or braid shall be secure to prevent fraying.

Containment - The harness and cable containment means shall be neat in appearance and uniformly applied. The containment means (lacing, ties, tiedown straps) shall not cause the wire or cable insulation to deform so that performance characteristics are

adversely affected.

Insulation - There shall be no evidence of burns, abrading, or pinch marks in the insulation that could cause short circuits or leakage.

Clearance - The clearance between wires or cables and heat generating parts shall be sufficient to minimize deterioration of the wires or cables.

3.5 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and

approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the

substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government

evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements:

Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

3.6 Soldering - The requirements for soldered electrical and electronic assemblies shall conform to IPC J-STD-001, Class ;2; .

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order,

the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the

specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any

inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance

does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies.

4.4 Visual, Dimensional, Mechanical Examination - Each CHASSIS shall be 100% inspected in accordance with ;CAGE 0KPC5 DRAWING CCHA40792-1; .

4.5 Electrical Performance Test - Each CHASSIS shall be 100% tested in accordance with ;CAGE 0KPC5 DRAWING CCHA40792-1; .

4.6 Inspection System Requirements - The supplier shall provide and maintain an inspection/quality system acceptable to the Government. The inspection system requirements for this contract/purchase order shall be in accordance with MIL-I-45208. Suppliers

certified to perform under ISO 9001 or ISO 9002 are granted permission to utilize the one desired in lieu of MIL-I-45208.

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

6. NOTES

6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS)

(i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/

A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk.

B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies.

C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to:

Commander, Indian Head Division, Naval Surface Warfare Center

Code 8410P, 101 Strauss Avenue

Indian Head, MD 20640-5035

D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for

certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document.

E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from:

Contracting Officer

NAVSUP-WSS

Code 87321

5450 Carlisle Pike

P.O. Box 2020

Mechanicsburg, Pa. 17055-0788

F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue:

Commanding Officer

NAVSUP-WSS

Code 009

5450 Carlisle Pike

P.O. Box 2020

Mechanicsburg, Pa. 17055-0788

G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from:

Commanding Officer

NAVSUP-WSS

Code 1 Support Branch

700 Robbins Avenue

Philadelphia, Pa. 19111-5094

H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS.

6.2 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information

contained on those documents and drawings.

There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows:

A... approved for public release; distribution is unlimited.

B... distribution authorized to US Governments agencies only.

C... distribution authorized to US Government agencies and their contractors.

D... distribution authorized to DoD and DoD contractors only.

E... distribution authorized to DoD Components only.

F... further distribution only as directed by Commander, Naval Sea

Systems Command, code 09T.

X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical

data in accordance with OPNAVINST 5510.161.

6.3 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of

this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer.