CGC MUNRO Shell Rotella T3 15W-40 contract opportunity
Cancelled Solicitation Posted
- Solicitation number
- 11706PR260000258
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- Place of performance
- California 94501, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of Homeland Security US Coast Guard seeks quotes for 2,000 gallons of Shell Rotella T3 15W-40 engine oil for USCGC MUNRO (WMSL 755), with quotes due May 20 and delivery required during the week of May 18.
Place of performance is Alameda, California. The procurement specifies Shell Rotella T3 15W-40 by brand and name with no substitutes permitted. The vendor must provide hoses for delivery from truck to cutter with at least 150 feet of hose capacity to transfer from the pier to the cutter, and must supply the connection from hose to the cutter's 2-inch cam lock fitting. Oil transfer will take place at Coast Guard Island at berth 1 on a concrete pier. The vendor must hold proper permits to transfer oil over water. Bulk delivery is preferred and must occur after 0800 and finish before sundown. The NAICS code is 336611, Ship Building and Repairing; PSC code is 2090, Miscellaneous Ship and Marine Equipment. Selection is based on lowest price technically acceptable. Questions shall be directed to MK2 Matthew Barnett at Matthew.N.Barnett@uscg.mil or 443-618-9775.
Notice text
Statement of Work
USCGC MUNRO (WMSL 755) is requesting quotes for supplies/services as described in the following statement of work:
-2000 gallons of Shell Rotella T3 15W-40 (must be specific brand and name) No substitutes.
-The delivery will be coordinated with the selected vendor but will be required during the week of MAY 18 2026.
-Preference will go to bulk delivery that will occur after 0800 (8:00 a.m.) and finish before sundown.
.
-The vendor will provide hoses for delivery from the truck to the cutter and shall have at least 150 feet of hose to transfer from the pier to the cutter.
-Oil on load will take place at Coast Guard Island and will take place at berth 1 on a concrete pier.
-Vendor shall have proper permits to transfer oil over water.
-The cutter connection point is a 2 inch cam lock fitting and vendor shall provide connection from hose to cam lock.
Selection will be based on lowest price technically acceptable. Questions shall be directed to MK2 Matthew Barnett, Matthew.N.Barnett@uscg.mil, 443-618-9775.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity