CGC alex haley thordon rudder bearing
Closed Solicitation Posted
- Solicitation number
- 70Z08526Q0028275
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332991 Ball and Roller Bearing Manufacturing
- PSC
- J999 Non-Nuclear Ship Repair (West)
- Place of performance
- Seward, Alaska 99664, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard seeks procurement of two Thordon lower rudder bearings (Part Number F6875573087) to support rudder stock removal, inspection, repair, and reassembly aboard the CGC Alex Haley, with proposals due September 14, 2026. The procurement is a total small business set-aside, restricting competition to firms in that category.
Place of performance is Seward, Alaska. The bearings are Government-furnished equipment measuring approximately 18.4 inches outside diameter by 15.4 inches inside diameter by 38.1 inches long, with no substitutions permitted. Delivery is required to JAG Alaska Inc., 3306 Sorrel Road, Seward, Alaska 99664, within 10 days of contract award. The NAICS code is 332991, Ball and Roller Bearing Manufacturing; PSC is J999, Non-Nuclear Ship Repair (West).
Evaluation employs pass/fail criteria for technical capability and past performance; quotations must receive an acceptable rating on all non-price factors to remain eligible for award. Among acceptable quotations, the award will be made to the responsible offeror submitting the lowest price. The solicitation incorporates 47 FAR clauses by reference, addressing ethics, small business program provisions, labor standards, environmental requirements, Buy American compliance, and contract administration terms including prompt payment and F.O.B. destination delivery. Contact for questions: Tristan Hustrulid, (571) 613-6373, tristan.j.hustrulid@uscg.mil.
Notice text
Combined Synopsis/Solicitation - 70Z08526Q0028275
CGC ALEX HALEY availability requires procurement of Government-furnished equipment (GFE) to support Work Item 37, Rudder Stock Remove, Inspect, & Repair. This procurement provides the GFE lower rudder bearings required to support removal, inspection, repair, and reassembly of the port and starboard rudders and rudder stocks.
The required GFE consists of the parts identified in 3.0 Required Parts, specifically two Thordon lower bearings, approximately 18.4-inch outside diameter by 15.4-inch inside diameter by 38.1-inch long, Part Number F6875573087. These bearings are required to support the rudder stock lower bearing assembly work and may be installed in place of existing equipment if bearing renewal is directed or required based on inspection results.
Timely procurement and availability of these GFE bearings is critical to support rudder removal, rudder stock inspection, upper bearing repairs, lower bearing inspection, rudder reassembly, alignment, operational testing, and completion of the work item during the scheduled availability.
QTY: 2
P/N: F6875573087
Thordon Lower Bearing Approx 18.4in OD x 15.4in ID x 38.1in Long
NO SUBSTITUTIONS
Delivery Address:
ATTN: CWO2 Chris Giboney, LCDR Hannah DelGuercio, LT Chris Maytum
JAG ALASKA INC.
DBA: JAG ALASKA INC
3306 SORREL RD
SEWARD, AK, 99664, US
Required period of performance: Work must be completed within 10 days of contract award.
The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation is most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:
• Technical Capability (Pass/Fail)
• Past Performance (Pass/Fail)
• Total Price
A quotation must receive an Acceptable rating for all non-price factors to be eligible for award. Among all acceptable quotations, award will be made to the responsible offeror submitting the lowest evaluated price.
To establish Technical Capability (Pass/Fail), the quotation must demonstrate a clear understanding of the work statement requirements, conform strictly to all specifications in the attached Statement of Work, and provide any adequate capability and corporate experience documentation required by the solicitation. Failure to meet these criteria will render the quotation unacceptable.
The Government will evaluate recent (completed within the last three years) and relevant past performance to assess the likelihood of successful performance. Past performance will be evaluated on an acceptable or unacceptable basis. To receive an acceptable rating, past performance must demonstrate a rating of satisfactory or higher performance of similar work. Offerors without recent or relevant past performance will be assessed as "Neutral" and considered acceptable for award. Past performance demonstrating marginal or below performance is unacceptable.
Offerors shall identify all subcontractors anticipated to perform work under this contract. For each subcontractor, the offeror shall provide the subcontractor’s name, address, point of contact, phone number, the specific work items/specifications they will perform, and the percentage of work they will execute.
Submit offers electronically via email to the points of contact identified in this notice. The Government does not prescribe a specific quotation format. Offerors must submit a quotation that clearly identifies the items offered and demonstrates compliance with the stated requirements. Submissions must be complete, clear, and presented in a format that allows effective evaluation by the Government. Submit all questions via email to the points of contact identified in this notice. The Government will not accept telephone inquiries.
Submit offers on a firm-fixed-price basis. Prices must be all-inclusive and must cover all costs associated with providing the services, including but not limited to labor, materials, equipment, supervision, transportation, and any other costs. The Government may consider offers nonresponsive if they include conditional pricing, price escalation language, or statements indicating that prices are subject to adjustment based on future costs or fees. The Government intends to evaluate offers and make award without discussions; therefore, offerors should submit their best offer with initial submission.
The Statement of Work, market research report, and the list of applicable FAR provisions and clauses are attached to this notice.
Files
| File | Type | Posted |
|---|---|---|
| FAR CLAUSES FOR SUPPLY.pdf | ||
| CGC ALEX HALEY THORDON BEARING.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Bearing Assembly | Coast Guard | Total Small Business | |
| Bearing roller | Coast Guard | No set-aside | |
| Bearing protectors | — | Total Small Business | |
| Bearing, ball, annula | Naval Supply Systems Command | No set-aside | |
| USCGC alder DD FY27 | — | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity