Cardboard Tube

The purpose of this synopsis modification is to change the solicitation number from W52P1J-10-R-3033 to W52P1J-11-R-3010. Solicitation number W52P1J-10-R-3033 was administratively cancelled and will not be used. Offerors interested in quoting the cardboard tubes as previously described should look for the solicitation posting under number W52P1J-11-R-3010 on/or about 29 Nov 2010.

46,000 each, Cardboard tube, PN 9829; Staple installed in one end plug (no 8 7/16 ich crown 1/2 inch leg) tube. Apply .005 inch thick moisture resistant silver foil wrap, both end plugs should be metal and fit tightly. The tube should be constructed out of .095 inch wall thickness chipboard. Interior shall be lined with a .005 inch thick silicone coated kraft tube, will withstand a longitudinal crush force of at least 1400 lbs when tested on a compression force test machine using an approach velocity of 20 inch per minute. The force is centered over the tube ends and applied thru memal plates placed over each tube ends. Ends of tube will be square cut. tubes will be packed and shipped in a 30 in X 20 in X 37 in hi (inside dimensions) 200 LB crush test RCS cardboard (or equivalent) carton. They will be packed 24 tubes per cartoon. they will not be skid mounted.