Cancellation of W912L7-10-T-0008 and resubmitted unrestricted.

Minimum Required Salient Characteristics:
Auto Belays shall be brand name or equal to FP 2.5 GDD Climbing Wall Descenders produced by North Safety Products. To be considered a equal product the proposed belays shall

Be capable of replacing existing MSA Redpoint Decender auto belays mounted on model S3 rock walls without modification to either the proposed belay or the current Government owned rock wall.

Not require vendor installation.

Be delivered no later than April 1 2010.

All metal used in the production of the belay shall corrosion resistant.

BUILD: self-retractable descent controller. Gear type: ringgear and pinion with a 8.1 gear ratio. Threads: All threads should be stainless and all threaded aluminum parts are helicoiled with stainless steel.

MATERIALS: Housing and covers shall be powered coated, and should be heat treated aluminum. Rope drum should be heat treated aluminum. Brake shall be high compression resistant and oil resistant brake material. Fasteners should be stainless steel Gears and shafts should be stainless steel and aluminum bronze.
Bearings should be self lubricating bronze and industry standard needle roller and clutch bearings

FEATURES:
Descent Brake: Shall be fitted with two independent descent brakes designed to allow fast retraction of cable into the device while allowing slow descent speed.

Please indicate if this product is a domestic MFG of equal product, If you are a domestic MFG please indicate Large or Small, vendor provide a description of product, and specify size standard of business.

cancelation of advertisment

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

STATEMENT OF WORK
Minimum Required Salient Characteristics

Auto Belays shall be brand name or equal to FP 2 5 GDD Climbing Wall Descenders produced by North Safety Products. To be considered a equal product the proposed belays shall

Be capable of replacing existing MSA Redpoint Decender auto belays mounted on model S3 rock walls without modification to either the proposed belay or the current Government owned rock wall.

Not require vendor installation.

Be delivered no later than April 1 2010.

All metal used in the production of the belay shall corrosion resistant.

BUILD. self retractable descent controller. Gear type ringgear and pinion with a 8 to 1 gear ratio. Threads All threads should be stainless and all threaded aluminum parts are helicoiled with stainless steel.
MATERIALS Housing and covers shall be powered coated, and should be heat treated aluminum. Rope drum should be heat treated aluminum. Brake shall be high compression resistant and oil resistant brake material. Fasteners should be stainless steel Gears and shafts should be stainless steel and aluminum bronze.
Bearings should be self lubricating bronze and industry standard needle roller and clutch bearings

FEATURES.
Descent Brake Shall be fitted with two independent descent brakes designed to allow fast retraction of cable into the device while allowing slow descent speed.
See solicitation document.