C-17 - Test Set, Environmental Control System AI
Closed Pre-Solicitation Posted
A newer solicitation was posted. See the latest solicitation from .
- Solicitation number
- FA8526-23-R-0003
- Agency
- AFLCMC Robins AFB Lifecycle Management Center, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 334419 Other Electronic Component Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
This pre-solicitation notice is seeking proposals for Test Set, Environmental Control System AI to support the C-17 aircraft. The procuring agency is the Department of the Air Force Materiel Command Lifecycle Management Center located at Robins Air Force Base. The requirement is for four test sets initially with options for additional units, to be used as an alternate means to isolate valve pressure control and electrical circuits for troubleshooting purposes when maintaining specific pneumatic valves within the aircraft's integrated environmental control system. Proposers must be able to provide the test sets, first article, production units, test plans, reports, and an IUID marking plan. The RFP is expected to be released on April 19, 2023, with a proposal due date of May 19, 2023.
This procurement has been designated as a total small business set-aside under NAICS code 334511 and FSC class 4920. Proposers must qualify as small businesses. Up to ten test sets could be procured over multiple option years. Incumbent contractors were not identified. This represents an opportunity for small businesses supporting C-17 aircraft maintenance to provide an improved troubleshooting solution for environmental control system valves.
Notice text
The C-17 PMO has a firm fixed-price requirement for: Test Set, Environmental Control System AI, Qty: 4 Ea, Option I: 3 Ea, Option II: 3 Ea, Option III: 3 Ea, NSN: 4920-01-611-3303BA, First Article/Production: 1 Ea/Production: 3 Ea, Test Plan: 1 LO, Test Report: 1 LO, IUID Marking Plan: 1 LO, P/N: 17G410645. The C-17 Aircraft utilizes an Integrated Environmental Control System (IECS) to provide steady state heating, cooling, ventilation and cabin pressurization. As part of the IECS, pneumatic valves are used to regulate flow within the system. Three of the valves utilized within IECS are the high stage bleed air pressure regulator valve, PN: 3214936-2-1, pylon pressure regulator bleed air valve, PN: 3214936-2-1, and the fan air valve, PN: 3224866-1-1. Maintainers have had difficulty identifying the faulty component when trouble-shooting faults involving the High Stage Regulator valve (HSV), Pylon Pressure Regulator/Pilot (PPRPV), Fan Air Valve (FAV), and the associated pilot valve using existing Fault Isolation (FI) Procedures. A means is required at the organizational and depot levels of maintenance to improve first-time fault isolation and reduce NMC/MMH by isolating the valve pressure control and electrical circuits for troubleshooting. The means is required to be used as an alternate to the current fault isolation procedure. The means will require an external 115 vac/ 60hz electrical power source and an external 160 psi compressed air source. The Government expects release of the RFP o/a 19 April 2023. This will be a 100% Small Business Set-Aside.
Notice history
| Notice | Type | Posted |
|---|---|---|
| C-17 - Test Set, Environmental Control System AI | Solicitation | |
| C-17 - Test Set, Environmental Control System AI | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity