Building 20203, Rooms 134 & 245, Eat Wing at KAFB

This action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act.
The contractor shall furnish all parts, material, labor, equipment and supervision necessary to complete the work for Building 20203 Room 134, 245, East Wing. The work shall include the following requirements as listed.

SPECIFIC REQUIREMENTS:a. Room 134 requires the following modification:
1. Furnish and install all duplex MM 300 laser speed fiber optic cabling, type LC connectors, type LC duplex adaptors.
2. Fiber can be run in the ceiling using J-hooks.
3. Furnish and install 24" cubit wall mount equipment rack.
4. Furnish and install 1U FDU w/loaded LC adaptors panels, conduit and plenum
cable support system to nine drop location.
5. Terminate, test and document all cables.
6. Furnish and install bonding of new equipment rack with #6 THHN wire to
bldg. steel.
7. All work will comply with ICD/ICS 705 specification.

b. Room 245 requires the following modification:
1. Trace out and LOTO ten existing power circuits.
2. Combine existing general use power circuits to free up circuiting for new power in room 245/247.
3. Remove and relocate existing light switch for the removal of existing wall.
4. Furnish and install all conduit, wire.
5. Connectrac to seven locations w/ three duplex receptacles and three duplex MM fiber drops, fiber optic cabling and devices to provide power and data for four new TV monitors and 21 work stations in bldg. 20203 rooms 245 & 247.
6. Furnish and install one 8 strand MM SIPR fiber optic cable to room 245.
7. All fiber installation will be installed per the ICD/IDS 705 specification.
8. Terminate, test and document all cables.
9. All installation will be in accordance with ICD/ICS 705 specification.
10. Room 245 is in a secure area and the fiber can be installed above the ceiling on J-hooks to each drop location within the room.
11. Remove door & door frame.
12. Remove existing wall.
13. Patch carpet.

c. The eastern section of the basement area in building 20203 requires these upgrades:
1.Furnish and install all duplex MM 300 laser speed fiber optic cabling, type LC connectors, type LC duplex adaptors.
2.Furnish and install 24" cubit wall mount equipment rack.
3.Furnish and install 1U FDU w/loaded LC adaptors panels, conduit and plumen cable support system to fourteen drop location in bldg. 20203 in the 2nd floor east wing.
4.Terminate, test and document all cables.
5.Furnish and install bonding of new equipment rack with #6 THHN wire to bldg. steel.
6.Fiber installation throughout the project will be installed as per installed per the ICD/ICS 705 specification.
7.Per the spec the 2nd floor east wing is in a secure area and the fiber can be installed above the ceiling on J-hooks to each drop location within the room.
8.Conduit will be installed between the 2nd floor west wing and the 2nd floor east wing to meet specification ICD/ICS 705.

. Awarded Vendors: Unified Contractor Inc. Contract Award Dollar Amount: 156,715.74. Contract Award Date: 2019-07-23.