Brand Name or Equal for One (1) Prinoth Model SW4S Municipal Snow Removal Vehicle Seeking SDVOSB or VOSB two determine if Rule of Two applies regarding supply the required vehicle. Respond by 4pm8/25/16

TECHNICAL SPECIFICATIONS



PRINOTH MUNICIPAL VEHICLE



MODEL SW4S













2016-2017









TECHNICAL SPECIFICATIONS IN COMPLIANCE

yes no

PROPOSED



1. GENERAL DESCRIPTION

Prinoth/Bombardier SW4S municipal vehicle



Rigid chassis with hydrostatic transmission system



Tracked sidewalk machine



High Flow Hydraulics to front of machine to operate high flow

attachments



Rear Hydraulic flow to operate spreader





2. DIMENSIONS, BASIC VEHICLE WITH TRACKS

Overall length (basic vehicle) 3175 mm (125 in)



Overall width (basic vehicle) 1285 mm (50.5 in)



Overall height (top of cab) 2337 mm (92 in)



Ground clearance 249 mm (9.8 in)



Shipping weight (basic vehicle) 3080 kg (6790 lbs)





3. OPERATIONAL CHARACTERISTICS WITH TRACKS

Maximum speed 30 km/h (19 mph)



Turning radius: 0 m



Ground pressure 265 g/cm2,, 3.7 PSI



Maximum gradeability:

sidehill 35 %

uphill 55 %





4. ENGINE

Caterpillar C4.4, Turbo Diesel, EPA Tier 3, Electronic



Horsepower 74 Kw (99 HP) @ 2500 RPM



Torque @ 420 N.m (310 lbs. ft) @ 1400 RPM



Engine block heater 750 W



Cold start aid; glow plug type



Fuel filter with water separator



Single stage dry air filter



Rear mounted side by side water radiator and oil cooler



Fuel tank: 120 liters (32 US gallons) set on rubber padding .



5. DRIVE SYSTEM

Fully variable hydrostatic transmission:

Sauer-Danfoss series 90 pumps: 75 cc.

Parker series F12 motor: 40cc.



Drive pumps ratio: 1 to 1



Steering system: Independent control of each track through micro-processor system with steering wheel. Close loop driving logic. Auto-calibration and centering features.



Dynamic braking through hydrostatic transmission



Multi-disc parking brake: spring applied, pressure released



Pressurized hydrostatic system to reduce the possibility of cavitation



Hydrostatic oil tank with heater. Tank of 19 liters (5 US Gallons) with visual level indicator and low level buzzer



Oil: ATF type F



Tracks driven by 11 tooth UHMW sprocket



Mechanical free wheel device for towing



6. SUSPENSION/TRACKS

Six (6) heavy duty solid rubber wheels



Front wheels on adjustable air suspension with hydraulic dampener



Rear wheels mounted on tandems



CAMOTRAK endless rubber tracks, with steel wire reinforcement, width 350 mm (13.75 in.) with provision for studs



Hydraulic and mechanical track tension adjuster





7. CHASSIS/CAB

Toboggan steel frame with access panels, painted black,

ready for wheel kit installation.

Steel type: ASTM A 569

Frame thickness (sides): 4.78 mm (3/16 in.)

Frame thickness (bottom): 6.35 (1/4 in.)



One person ROPS cab complying and rubber dampeners with front electric power tilt cylinder for easier service access. Cab noise insulation which limits noise levels to 85 dba at 1900 RPM. Grab handles. Sliding windows on two sides. Door lock. Cup holder. Cab and cowling color is Prinoth yellow.



KAB suspension seat with four (4) adjustment modes. Three (3) point safety belt



Heater 24000 Btu/hr with fresh air intake and directional vents



Radio am/fm w CD player with speakers



Front wiper with intermittent speeds



Rear wiper



Cab access step



Rear window defrost



Cab can be hydraulically lifted and tilted forward with just the push of a button



8. HYDRAULIC SYSTEM FOR FRONT IMPLEMENT AND

REAR SAND SPREADER

Front hydraulic setting is 25 GPM @ 3000 PSI high flow.



Rear hydraulic for salt and sand spreader 6.6 GPM @ 1400 RPM



9. ELECTRICAL SYSTEM / INSTRUMENTS / CONTROLS

12 V electrical system with negative ground



Alternator 85 amp. with integrated voltage regulator



Battery 950 CCA



Complete lighting system including:

Two (2 ) front halogen lights (Low & High)

One (1) rear halogen light

Flashers, front and rear

Beacon light on roof

Beacon light protector

Dome light



Back up alarm and override switch



Front windshield wiper and windshield washer fluid, two (2) speeds and intermittent control



Horn



One (1) 12 Volts power outlet



Progressive Forward-Neutral-Reverse lever



Electronic hand throttle for engine speed



Electronic foot pedal for vehicle speed



Joystick control for front mounted implements



10. COLOR SCREEN DISPLAY

Gauges and indicators:

Hour meter

Fuel level

Tachometer

Hydrostatic oil temperature

Transmission neutral position

Fault code diagnostics (engine & transmission)

Engine oil pressure

Engine coolant temperature

Voltmeter

Outside temperature

Winter to summer mode trigger



Warning lamps and buzzers:

High engine temperature

Low engine oil pressure

High hydrostatic temperature

Low hydrostatic oil level

Parking brake indicator

Low fuel level

Engine & transmission fault



Warning lamps:

Parking brake indicator

Transmission neutral position

Engine warning lamp

Engine wait to start lamp

Engine stop lamp

Low battery voltage





11. PUSH FRAME

Push frame SAE "skid steer type" including:



One lift cylinder with nitride treated rod

Two tilt cylinders

Lock valve (to insure that the blade does not drop





12. WARRANTY/MANUALS

Vehicle limited (parts and labor) warranty 1 year / 1000

hours whichever occurs first



Operation / maintenance kit including:

Vehicle Operation, Parts and Service manuals





13. ATTACHMENTS



13.1 HEAVY DUTY STRAIGHT BLADE

1520mm (60in) with trip mechanism, angling capacity, 4 way





13.2 V PLOW

1200 mm (48 in.) with replaceable cutting edge







13.3 SAND & SALT SPREADER

Standard 0.38 m3 (0.50 Y3)

Spread width 825 mm (32.50 in.

Quick attach system

Control of flow with potentiometer inside of cab

Proportional control is controlled through micro-

processor for constant spreading. No flow when

vehicle is stopped.







13.4 SNOW BLOWER

Capacity: 5 tons per minute (300 tons per hour)

Fully hydraulic

Cutting width with side plates (1371 mm - 54 in.)

Cutting height (1295 mm - 51 in.)

Chute rotation (degree) (245o)

Adjustable skid shoes

2 full flight spiked augers

No mechanical shear pin

Hydraulic full float (up and down)





13.5 SNOW BLOWER EXTENSION CHUTE

Length 1220 mm (48 in.)





14. SERVICE AND SUPPORT

Product must have been represented by distributor for over

10 years



Product must have been manufactured and on the market

for over 10 years



Service facility must have service vehicles and technicians

who are able to provide service at customer's location



Distributor must be able to provide a list of 10 references of

customers who have purchased the current model machine

within New England.