Bonneville lock and DAM powerhouse 1 metering enhancement

06 June 2024: The purpose of this Amendment is to add draw ings/plans that w ere inadvertently left out of the Solicitation package. All other terms and conditions remain unchanged.

Project Scope: The scope of this project consists of the Contractor furnishing all supervision, engineering, labor, materials, and equipment to perform the following work in accordance with the detailed requirements of this contract.

Background: Bonneville Power Administration (BPA) would like to enter the Energy Imbalance Market (EIM), to do so, BPA needs additional high accuracy class instrument transformers. The requirement for CTs (Current Transformers) to be installed approximately 26 feet above the existing roof elevation, above truss-beam. New mounting supports will also need to be installed for the CTs and pedestals on top of the existing roof.  The structural and electrical design, provided by the Hydro Design Center (HDC), provides supports for the new CTs, station post insulators, and busses at locations that provide the required electrical clearances. The HDC designs also evaluates the requirements of supporting the new CTs, station post insulators and busses on legacy roof structural system.  The Government will provide the metering-grade CTs and PTs (Potential Transformers), and three deflection insulators. PT’s will be replaced in existing location. The Contractor will maintain the maximum distances from ground for each phase to add the real time metering accuracy PT’s and CT’s as directed by the requirements.

Description of Requirement: The Bonneville Power Administration (BPA) has the required metering CTs and PTs in inventory and will provide these to The U.S. Army Corps of Engineers, Portland District, as Government-Furnished Equipment (GFE) for the metering enhancement installation contract. This eliminates the over one-year lead time for commercial procurement of the CTs and PTs after contract award, which would be an unacceptable delay. Bonneville Project O&M staff have committed to furnishing and installing the low-voltage conduit and wiring to the RTU room in the powerhouse. BPA will design and separately install the new control board in the RTU room and will complete the wiring connections. This reduces the installation contractor's scope to fabrication and installation of the new CT supporting structures as detailed in the Plans and Specifications, installing the CT's, replacing the PTs on their existing supporting structures, and field acceptance testing of the GFE instrument transformers.

The project is located at Bonneville Dam in Multnomah County, Oregon.

Magnitude of Construction: $1,000,000.00 to $5,000,000.00

Set Asides and Codes: Full and Open Competition. The North American Industrial Classification Code (NAICS) for this potential requirement would be 238210, “Electrical Contractors and Other Wiring Installation Contractors”. The related size standard is $19M. The Product Service Code (PSC) is Z1KA - Maintenance of Dams.

Project Scope: The scope of this project consists of the Contractor furnishing all supervision, engineering, labor, materials, and equipment to perform the following work in accordance with the detailed requirements of this contract.

Background: Bonneville Power Administration (BPA) would like to enter the Energy Imbalance Market (EIM), to do so, BPA needs additional high accuracy class instrument transformers. The requirement for CTs (Current Transformers) to be installed approximately 26 feet above the existing roof elevation, above truss-beam. New mounting supports will also need to be installed for the CTs and pedestals on top of the existing roof.  The structural and electrical design, provided by the Hydro Design Center (HDC), provides supports for the new CTs, station post insulators, and busses at locations that provide the required electrical clearances. The HDC designs also evaluates the requirements of supporting the new CTs, station post insulators and busses on legacy roof structural system.  The Government will provide the metering-grade CTs and PTs (Potential Transformers), and three deflection insulators. PT’s will be replaced in existing location. The Contractor will maintain the maximum distances from ground for each phase to add the real time metering accuracy PT’s and CT’s as directed by the requirements.

Description of Requirement: The Bonneville Power Administration (BPA) has the required metering CTs and PTs in inventory and will provide these to The U.S. Army Corps of Engineers, Portland District, as Government-Furnished Equipment (GFE) for the metering enhancement installation contract. This eliminates the over one-year lead time for commercial procurement of the CTs and PTs after contract award, which would be an unacceptable delay. Bonneville Project O&M staff have committed to furnishing and installing the low-voltage conduit and wiring to the RTU room in the powerhouse. BPA will design and separately install the new control board in the RTU room and will complete the wiring connections. This reduces the installation contractor's scope to fabrication and installation of the new CT supporting structures as detailed in the Plans and Specifications, installing the CT's, replacing the PTs on their existing supporting structures, and field acceptance testing of the GFE instrument transformers.

The project is located at Bonneville Dam in Multnomah County, Oregon.

Magnitude of Construction: $1,000,000.00 to $5,000,000.00

Set Asides and Codes: Full and Open Competition. The North American Industrial Classification Code (NAICS) for this potential requirement would be 238210, “Electrical Contractors and Other Wiring Installation Contractors”. The related size standard is $19M. The Product Service Code (PSC) is Z1KA - Maintenance of Dams.