Blanket Purchase Agreement for Dynometers, Penetrometers, Accessories, Repair and Calibration

Firm Fixed Priced Blanket Purchase Agreement to supply Penetrometers, Accessories, Repair,Calibration and Accuracy Verification Services for a period not to exceed five years

Base Period 03/04/2013 - 12/31/2013
Period I 01/01/2014 - 12/31/2014
Period 2 01/01/2015 - 12/31/2015
Period 3 01/01/2016 - 12/31/2016
Period 4 01/01/2017 - 12/31/2017

ITEMS:

Graduations: Dual graduations in pounds (lbf) and grams (gf) with lbf on the outer reading line.
Accessories: Penetrometer Tip (s), Test Hook, Peeler, Splash Plate and Manual in a compact case.
Size: Overall Length: 3.5 Inches (90 mm). Warranty: One Year Limited
Net Weight: 3 Ounces (90 g). Accuracy: ± 1 Graduation

Dynometers
ITEM (CLNS 001-D, 007-D, 013-D, 019-D & 025-D)

FRUIT TESTER (FT SERIES)-FT 10
Capacity: 10 lbf X 2 ozf
Graduation: 5 kgf X 50 gf
Tips: 5/16" (8 mm) Diameter

ITEM (CINS 002-D, 008-D, 014-D, 020-D & 026-D)

FRUIT TESTER (FT SERIES)-FT 30
Capacity: 2 lbf X 1/4 ozf
Graduation: 1 kgf X 10 gf
Tips: 5/16" (8 mm) Diameter

ITEM (CLINS 003-D, 009-D, 015-D, 021-D & 027-D)

TEST STAND
Compact manual test stand lever which includes mounting plate for FT 10 and FT 30.

 Penetrometers

ITEM (CLNS 001-P, 007-P, 013-P, 019-P & 025-P)

FRUIT TESTER (FT SERIES)-FT 11
Capacity: 11 lbf X 1/8 lb
Graduation: 5 kgf X 50 gf
Tips: 5/16" (8 mm) & 7/16" (11 mm) Diameter

ITEM (CINS 002-P, 008-P, 014-P, 020-P & 026-P)

FRUIT TESTER (FT SERIES)-FT 327
Capacity: 28 lbf X 1/4 lb
Graduation: 12.7 kgf X 100 gf
Tips: 5/16" (8 mm) & 7/16" (11 mm) Diameter

ITEM (CLINS 003-P, 009-P, 015-P, 021-P & 027-P)

TEST STAND
Compact manual test stand lever which includes mounting plate for FT 11 and FT 327.

ITEM (CLINS 004-D, 010-D, 016-D, 022-D & 028-D)
(CLINS 004-P, 010-P, 016-P, 022-P & 028-P)
REPAIR SERVICES
Replace gage with factory rebuilt gage.

ITEM (CLINS 005-D, 011-D, 017-D, 023-D & 029-D)
(CLINS 005-P, 011-P, 017-P, 023-P & 029-P)
CALIBRATION SERVICES
Accuracy verification-if unit is within acceptable tolerances a National Institute of Standards and Technology (NIST) Calibration Certificate will be issued.

ITEM (CLINS 006-D, 012-D, 018-D, 024-D & 030-D)
(CLINS 006-P, 012-P, 018-P, 024-P & 030-P)
Repair and Accuracy Verification Services
Accuracy verification-if unit is out of tolerance the gage will be replaced with a rebuilt gage and a National Institute of Standards and Technology (NIST) Calibration Certificate will be issued.

It is possible that these services will not be required in any fiscal year. The need for having these services performed will be pursuant to whether or not a penetrometer or dynometer is producing erroneous readings. These services will be performed by the supplier/manufacturer at their facility.

The Government (AMS) will ship units for calibration and repair to the QA Supplies, LLC facility in Norfolk, VA. The contractor is responsible for returning the unit to the Government (AMS) including all transportation charges. These charges must be reflected in the firm fixed price for services. .