Blade, propeller, air, in repair/modification of
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N0038325RN147
- Agency
-
Naval Supply Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
- PSC
- 1610 Aircraft Propellers And Components
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Supply Systems Command is seeking a contractor to repair, test, and inspect aircraft propeller blades through this solicitation. The opportunity, identified by the contract ID 21dd29e1a0194559a1c95887c46bda8c, focuses on repair and modification of air propeller blades with specific technical requirements. Key contract requirements include stripping yellow paint from items and repainting with white coating systems using approved epoxy and primer materials like MIL-P-53022 Type II. Contractors must adhere to strict paint removal and application standards, including using SAE-AS22759 series wire instead of MIL-W-81381 wire. The solicitation was posted on December 20, 2024, with proposals due by December 26, 2024, and interested parties can contact Arianna Pilla at arianna.g.pilla.civ@us.navy.mil for additional information.
This contract opportunity is not set aside for any specific business category and falls under the NAICS category 336413 for Other Aircraft Parts and Auxiliary Equipment Manufacturing. The procurement is categorized under PSC 1610 for Aircraft Propellers and Components. While specific award values are not detailed in the solicitation, the contract will be executed through Wide Area Workflow payment instructions. Contractors must be prepared to handle all necessary equipment, tooling, and manufacturing aids independently, as the government will not provide these resources. Personnel performing tasks must be trained and certified according to IPC/EIAJ-STD-001C standards. The performance location is to be determined, but the contract will be managed by the Naval Supply Systems Command, a defense agency responsible for naval procurement and logistics.
Notice text
CONTACT INFORMATION|4|n731.47|n00383|215-697-1488|arianna.g.pilla.civ@us.navy.mil|
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Reports (Combo)|Inspection site source final acceptance site source|tbd|N00383|TBD|TBD|See schedule|n/a|||||||||
Terms & Conditions of BOA N0038322GZ901 apply.
This contract/delivery order/purchase order/modification is issued by the Government when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email. The Government's acceptance of the contractor's proposal
constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification.
\
1. SCOPE
1.1 Articles to be furnished hereunder shall be repaired, tested andinspected in accordance with the terms and conditions specified in theRequirements Section of this document.
1.2 Unless expressly provided for elsewhere in this clause, equipment suchas fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, orany other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be
provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification.
1.3 The use of MIL-W-81381 wire in any item to be delivered under this procurement is prohibited. The foregoing prohibition applies notwithstanding any reference to MIL-W-81381 wire that may be made in any of the drawings or specifications for this
procurement. SAE-AS22759 series wire shall be used in lieu of MIL-W-81381 wire, in any place where MIL-W-81381 wire is cited in this procurement. Any questions concerning this requirement should be directed to the Procuring Contracting Officer.
1.4 If MIL-STD-454 is referenced in the drawings or in the specification,the contractor is expected to show compliance with IPC/EIAJ-STD-001C Personnel performing tasks in accordance with IPC/EIAJ-STD-001C shall be trained and certified as requried by
IPC/EIAJ-STD-001C paragraph 5.1.4.
2. APPLICABLE DOCUMENTS - NOT APPLICABLE
3. REQUIREMENTS
3.1 Items coated with yellow paint shall be totally stripped of yellow paint and repainted with white coating systems as follows:
3.1.1 Primary System
a. Pretreatment, for steel only, shall be MIL-C-10578. Pretreatment for aluminum is not authorized.
b. Primer shall be epoxy coating MIL-P-53022 Type II (VOC 340 G/L), available from:
1. Sherman Williams, (312) 821-3434
P/N E90WY14/V93VY9
2. PPG (216) 671-0056
P/N W423305
3. Niles (800) 253-7389
P/N 3580
c. If above materials are not available, the following materials are authorized for use:
1. Epoxy coating MIL-P-5302 Type II (VOC 420 G/L).
Where permitted by local environmental regulations.
2. Epoxy, water reducible, shall be MIL-P-5303
(VOC 340 G/L).
3. Topcoat Primer-Polyurethane shall be MIL-C-85285,
Type II (VOC 340 G/L) color number 17925 CF FED-STD-595.
d. All removed yellow paint should be treated as if it contains lead and chromates and proper safety and disposal procedures shall be adhered to.
4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE.
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
Notice history
| Notice | Type | Posted |
|---|---|---|
| Blade, propeller, air, in repair/modification of | Award Notice | |
| This notice | Solicitation | |
| Blade, propeller, air, in repair/modification of | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Propeller, marine | Naval Supply Systems Command | No set-aside | |
| Blade set, fan, aircr, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Blade, turbine engin, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Blade assembly, main, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Blower, engine, eaps, in repair/modification of | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity