Benning TSC Wide Belt Sander
Cancelled Solicitation Posted
- Solicitation number
- W911S225QTSC2
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333243 Sawmill, Woodworking, and Paper Machinery Manufacturing
- PSC
- 3220 Woodworking Machines
- Place of performance
- Training Support Center5251 Smiley Court Bldg 3020Fort Benning, GA 31905
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum is procuring a Powermatic WB-37 or equal 37-inch wide belt sander for the Benning Training Support Center. The required equipment must be a 20HP 3-phase industrial sander with centralized controls, variable speed feed belt, digital readout control for thickness measurement, and an air-eye system controlling oscillation for the 37-inch x 7-inch sanding belt. Key specifications include a pneumatic sensor system, three motor configuration with the main 20HP motor powering drive drums, secondary 1HP motor for the variable speed feed belt, and a third motor for automatic feed table adjustment. The sander must accommodate boards ranging from 1/8 inch to 6 inches in thickness, 12 inches minimum to 37 inches maximum width, and feature safety disc brakes with emergency stop capability. This solicitation was posted on August 20, 2025, with responses due by August 25, 2025, providing contractors only five days to submit proposals.
This procurement does not utilize any set-aside designations, making it open to all qualified contractors. No incumbent contractors or current service providers are identified in the solicitation notice. The solicitation does not specify award values, budget ranges, or quantities, indicating this appears to be for a single unit purchase. Key technical specifications include requirements for 75-80 PSI air supply, minimum 1,600 CFM dust collection capacity with 5-inch dust port diameter, 230/460V motor voltage prewired to 230V, and a gross weight of 2,200 pounds with net weight of 2,090 pounds. Performance will take place at Fort Moore, Georgia, and the equipment must include a 5-year warranty with sanding belt speed of 2,625 feet per minute.
Notice text
Powermatic WB-37 or Equal 37 inch Wide Belt Sander 20HP 3-Phase with centralized controls, variable speed feed belt to accurately dial in the exact feed speed, digital readout control to display the exact thickness of both the starting and finished piece or preset of finished piece thickness, air-eye system which controls the oscillation for the 37 inch x 7 inch sanding belt. Features pneumatic sensor system controls and powerful three motor system. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically. Contains a safety disc brake, which slows the machine quickly and stops it instantly in the event of an emergency. Stock Number Powermatic 1790837 or Equal; Air Required: 75-80; Dust Collection Minimum CFM Required (CFM): 1,600; Dust Port Outside Diameter: 5 inches; Feed Motor Power: 1HP; Maximum Board Thickness: 6 inches; Maximum Board Width: 37 inches; Minimum Board Length: 12 inches; Minimum Board Thickness: 1/8 inch; Model Number: Powermatic WB-37 or Equal; Motor Phase: 3; Motor Power: 20HP; Motor Voltage: 230/460V; Prewired Voltage: 230V; Recommended Circuit Size: 70/35 AMP; Sanding Belt Speed: 2,625 FPM; Style (Type): Wide Belt Sander; Warranty: 5 Year; Gross Weight: 2200.0; Net weight: 2090.0.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity