Army, JROTC, Jacket (Black Windbreaker)

*NOTE: ONLY DOMESTICALLY MANUFACTURED ITEMS WHICH ARE MADE FROM 100% DOMESTIC PRODUCTS ARE PERMITTED.

THIS POSTING IS A PRE-SOLICITATION NOTICE.

This information is for solicitation SPE1C1-18-R-0155, for the purchase of the Army, JROTC, Jacket (Windbreaker). This will be an indefinite delivery, indefinite quantity type contract with the following information:

Item: Army, JROTC, Jacket (Black Windbreaker)
NSN Series: 8405-01-447-7188
Quantity: 23,220 (AEQ)
Maximum Quantity: 145,140
Minimum Quantity: 5,808

This item is being purchased in accordance with specification JD-01, pattern date June 3, 2004.

The solicitation, when issued, will state the required quantity of PDMs and which size(s) of demonstration model(s) are required.

The lead time for this contract is 120 days for initial order, with 90 days for subsequent orders.

The destination for this item is:

SC0150
LVI - Army 3PL
Pendergrass Distribution Center
596 Bonnie Valentine Way - DOOR 20-23
Pendergrass, GA 30567

Items will be procured on the basis of FOB Destination, Inspection and Acceptance at Origin. Special measurements will be procured on the basis of FOB Destination, Inspection/Acceptance Origin.

This solicitation will be for a single one-year base term, with the potential for four one-year option terms.
The solicitation will be issued as a 100% small business set aside procurement and will result in a firm fixed price contract. Evaluation shall occur on a Best Value basis, with the following non-price evaluation factors. These factors are considered more important then price.

Non-price evaluation factors for award are the following:
Past Performance - Level of Confidence Assessment
Product Demonstration Model (PDM)

Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form.

Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM). 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their SAM registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance).

****The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as "The Berry Amendment") impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and "specialty metals" (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies.

Instructions on submission of bid will be contained within the solicitation document.

DLA TROOP SUPPORT has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for DLA TROOP SUPPORT Clothing and Textiles (DLA TROOP SUPPORT C & T) solicitations, use the following link to the DLA TROOP SUPPORT C & T Technical Data Repository area at

http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx

If patterns are requested from the above are not received within two weeks, contact Michael O'Connor, at Michael.E.OConnor@dla.mil or 215-737-2458.

PGC UPC NSN NOMENCLATURE SIZE
02416 718020331034 8405-01-447-7188 Jacket, Utility X SMALL
02416 718020331041 8405-01-447-7195 Jacket, Utility SMALL
02416 718020331058 8405-01-447-7197 Jacket, Utility MEDIUM
02416 718020331065 8405-01-447-7200 Jacket, Utility LARGE
02416 718020331072 8405-01-447-7203 Jacket, Utility X LARGE
02416 718020331089 8405-01-447-7206 Jacket, Utility XX LARGE
02416 718020515960 8405-01-522-9239 Jacket, Utility XX SMALL
02416 N/A 8405-00-0WN-D362 Jacket, Utility SPECIAL MEA
US ARMY JROTC
.
ADDITIONAL INFORMATION FOR JD-01:
.
PATTERN DATE: JUNE 03, 2004
.
ROLL NO. 3668 IS AVAILABLE FOR SHADE ONLY.
INTERIM CHANGES TO JACKET, WINDBREAKER, UNISEX
.
PAGE 1, UNDER DESCRIPTION
ADD THE FOLLOWING "THE ENDS OF THE SLASH
POCKETS SHALL BE SECURELY BARTACKED, SUPERIMPOS-
ED OVER THE EDGESTITCHING ALONG THE WIDTH OF
THE POCKET WELT.
PAGE 1, DESCRIPTION, LINE 4, AFTER "SHOULDER
LOOPS (EPAULETS)"ADD "CENTERED ON THE SHOULDER
SEAM, BUTTON FOR SHOULDER LOOP SHALL BE PLACED
1-1/4 INCH FROM THE COLLAR JOINING SEAM"
.
AT THE END OF THE PARAGRAPH ADD
"NOTE: THE SHOULDER SEAM ON PATTERN SHALL BE
CENTERED ALONG THE SHOULDER LINE."
.
PAGE 1 UNDER "ZIPPER" ADD "SLIDE FASTENER"
SHALL BE SET 1/4 TO 1/2 INCH ABOVE FRONT
LOWER FOLDED EDGE OF JACKET AND SHALL
FINISH SMOOTH AND FLAT"
.
PAGE 1 UNDER "STITCHING" ADD "SEAM ALLOWANCE
SHALL BE 1/2 INCH FOR ALL SEAMS EXCEPT COLLAR
AND COLLAR STAND WHICH SHALL BE 3/8 INCH."
.
PAGE 1, UNDER LINING MATERIAL, DELETE AND
SUBSTITUTE: "THE REMOVABLE LINER SHALL BE
A QUILTED 2-OZ PER SQUARE YD POLY FILL, WITH
DIAMOND OR RAILROAD STITCH."
.
DELETE CURRENT "BAR-CODE LABEL/TAG"
REQUIREMENTS AND SUBSTITUTE THE FOLLOWING
"LABEL/TAG. EACH ITEM SHALL BE INDIVIDUALLY
BAR-CODED WITH A PAPER TAG FOR PERSONAL
CLOTHING ITEMS. THE PAPER USED FOR THE TAGS
SHALL BE STANDARD BLEACHED SULFATE HAVING A
BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH
FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT
PRINTING. THE TAGS SHALL HAVE A HOLE AND
SHALL BE ATTACHED TO EACH ITEM BY A FASTENER
CLEARLY LEGIBLE AND READABLE BY SCANNER
THE BAR CODING ELEMENT SHALL BE A 13 DIGIT
DELETE CHART OF DIMENSIONS AND SUBSTITUTE:
NATIONAL STOCK NUMBER (NSN). THERE SHALL BE
A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)
ASSIGNED FOR ALL NSNS BY THE GOVERNMENT
THE INITIALS "UPC" MUST APPEAR BENEATH THE
CODE. THE BAR CODES FOR NSN AND UPC SHALL BE
A MEDIUM TO HIGH DENSITY AND SHALL BE
LOCATED SO THAT THEY ARE COMPLETELY VISIBLE
ON THE ITEM WHEN IT IS FOLDED AND OR PACKAGED
AND SHALL CAUSE NO DAMAGE TO THE ITEM."
.
DELETE CHART OF DIMENSIONS AND SUBSTITUTE:
SIZE XXSMALL XSMALL SMALL TOL
A. CHEST 20-1/2 22-12 24-1/2 +/- 1/2"
B. BOTTOM 14 15-1/4 16-1/2 +/- 1/2"
. SWEEP
C. SLEEVE 33-1/2 34-1/2 35-1/2 +/- 1/2"
. LENGTH
D. CENTER 26-1/2 27 27-1/2 +/- 1/2"
. BACK
E. SHOULDER 17-1/4 18-1/2 19-3/4 +/- 1/2"
.
SIZE MEDIUM LARGE X-LARGE TOL
A. CHEST 26-1/2 28-1/2 30-1/2 +/- 1/2
B. BOTTOM 17-3/4 19 20-1/4 +/- 1/2"
. SWEEP
C. SLEEVE 36-1/2 37-1/2 38-1/2 +/- 1/2"
. LENGTH
D. CENTER 28 28-1/2 29 +/- 1/2"
. BACK
E. SHOULDER 21 22-1/4 23-1/2 +/- 1/2"
.
SIZE XX-LARGE TOL
A. CHEST 32-1/2 +/- 1/2"
B. BOTTOM 21-1/2 +/- 1/2"
. SWEEP
C. SLEEVE 39-1/2 +/- 1/2"
. LENGTH
D. CENTER 29-1/2 +/- 1/2"
. BACK
E.SHOULDER 24-3/4 +/- 1/2"
.
(A) CHEST: TWICE THE MEASUREMENT TAKEN ACROSS
THE FRONT AT BASE OF THE ARMHOLE SEAM FROM
FOLDED EDGE TO FOLDED EDGE.
.
(B) BOTTOM SWEEP: TWICE THE MEASUREMENT TAKEN
FROM THE FOLDED END TO FOLDED END TAKEN AT CENTER
OF KNITTED WAISTBAND IN A RELAXED POSITION.
.
C) SLEEVE LENGTH: MEASUREMENT TAKEN STARTING AT
CENTER BACK AT UNDERCOLLAR JOINING SEAM, OVER
TOP SHOULDER SEAM TO BOTTOM OF SLEEVE.
.
(D) CENTER BACK: MEASUREMENT TAKEN FROM THE
CENTER OF THE BACK UNDERCOLLAR SEAM TO BOTTOM
OF THE JACKET.
.
(E) ACROSS SHOULDER: MEASUREMENT TAKEN ACROSS
BACK FROM SHOULDER POINT TO SHOULDER POINT.
.
BASIC MATERIAL PHYSICAL REQUIREMENTS TESTING
.
CHARACTERISTIC REQUIREMENT TEST METHOD
FIBER CONTENT,
.PERCENT POLYESTER 65 +/-3 AATCC 20-A
. COTTON 35 +/- AATCC 20-A
.
YARN PLY
.WARP 2 PLY OR VISUAL
.FILLING SINGLES VISUAL
.
WEIGHT,
.OZ/SQ YD 5.3-6.8 ASTM D 3776
.
YARNS PER
.INCH (MIN)
. WARP 180 ASTM D 3775
. FILLING 70 ASTM D 3775
.
WEAVE PLAIN VISUAL
.
AIR PERMEABILITY,
.(MAX) 10.0 ASTM D 737.75
.
BREAKING STRENGTH,
.LBS, (MIN.) 180 ASTM D 5035
.FILLING 70 ASTM D 5035
.
TEARING STRENGTH,
.LBS (MIN).
.WARP 5.0 ASTM D 1424
.FILLING 2.0 ASTM D 1424
.
DIMENSIONAL
.STABILITY,
.PERCENT(MAX.)
.WARP 3.0 AATCC 96, Vc,D
.FILLING 3.0 AATCC 96, Vc,d
.
LABILE SULPHUR EQUAL TO STANDARD 2020 1/
. OR "SLIGHT"
.
COLORFASTNESS TO:
.LAUNDERING
.( AFTER 3 CYCLES) 3.0 AATCC 61,3A
.PERSPIRATION 3.0 AATCC 15
.CROCKING (MIN) 2.5 AATCC 8
.WET DRYCLEANING 3.0 AATCC 132
.LIGHT
.(AFTER 40 STD.
. FADING HOURS) 3.0 AATCC 16, OPT. A
.PH 5.0-8.5 AATCC 81
.
1/ FED-STD-191 TEST METHOD CITED
.
PACKAGING/PACKING REQUIREMENTS:
COMMERCIAL PACKAGING AND PACKAGING SHALL BE
ACCEPTABLE PROVIDED IT IS SUFFICIENT TO
PREVENT DAMAGE TO THE ITEMS DURING SHIPPING.
THE CONTRACTOR WILL BE RESPONSIBLE FOR ANY
IN-TRANSIT DAMAGE OR LOSS.
.
THE GOVERNMENT ASSIGNED UNIVERSAL PRODUCT CODE
(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON
WHICH THE NSN APPEARS).
(Ref. W2416)

.