Architectural and engineering design services at the wolf creek civilian conservation center located in glide, oregon

Correction: The announcement for Architectural and Engineering Services under Solicitation No. DOL089RP20490 is revised as follows: 1) FROM: SOLICITATION NO. DOL089RP20490 is DUE on January 24, 2008. TO: SOLICITATION NO. DOL089RP20490 is DUE on January 16, 2008. 2) FROM: Only those firms that submit the forms by 3:30 PM EST, January 24, 2008 will be considered for review of qualifications. TO: Only those firms that submit the forms by 3:30PM EST, January 16, 2008 will be considered for review of qualifications. 3) All other items remain the same.

U.S. Department of Labor, OASAM, Division of Job Corps A&E and Construction Services, 200 Constitution Avenue, NW, Room N-4308, Washington, DC 20210.C--ARCHITECTURAL AND ENGINEERING DESIGN SERVICES AT THE WOLF CREEK CIVILIAN CONSERVATION CENTER LOCATED IN GLIDE, OREGON. SOLICITATION NO. DOL089RP20490 is DUE on January 24, 2008. This project involves A/E design and construction administration services for a new cafeteria building, demolition of two existing dormitory buildings, and demolition of one existing cafeteria building at the Wolf Creek Civilian Conservation Center located in Glide, Oregon. The new cafeteria will be a single-story, approximately 7,440 gross square foot building. The work will include miscellaneous related site improvements such as general landscaping, roads, parking, drainage, connection to all utility lines and site/security lighting. The approximate size of buildings requiring demolition are: Building 1309 at 3,620 gross square feet, Building 1310 at 3,440 gross square feet, and Building 1404 at 11,110 gross square feet. All three buildings to be demolished were built in 1965 and are single story construction consisting of concrete pier foundations, wood siding exterior wall systems, and wood roof framing with asphalt shingles. The magnitude of construction for design is between $1,000,000 to $5,000,000. The A/E will provide a design for the new cafeteria building based on the Department of Labor Prototype Design Guidelines. Firms responding to this announcement must demonstrate their experience in the aforementioned building type. The required disciplines are architectural, Civil, Structural, Mechanical (HVAC and Plumbing), Electrical, and Kitchen Designer. Firms must be capable of producing the design documents on AutoCAD release 2000 or higher. Specifications shall be provided in CSI format and be MS-Word compatible. Total Design Time is forty (40) weeks. Firms that meet the requirements described in this announcement are invited to submit one copy of a completed SF-330 Part II - Architect-Engineer Qualifications to include brief resumes of key personnel expected to have major responsibilities for the project. Section H of the SF-330 shall be tailored to reflect a strong background in the design and renovation of facility type identified above. Section H will be used as a major evaluation factor of the firms qualifications as noted in (2) of the order of importance below. One current copy of SF-330 Part I Contract Specific Qualification is required for the prime to include projects related to the type and nature of work for which the firm was responsible, and one copy of SF-330 Part I is required for each of its individual consulting firms, if applicable. Note: An SF-330 Parts I and II shall be submitted by the prime even if they are currently on file. Completed SF 330s shall be submitted to the US Department of Labor/OASAM/Office of Procurement Services, Division of Job Corps A&E and Construction Services, 200 Constitution Avenue, NW, Room N-4308, Washington, DC 20210, ATTN: Eileen Garnett (202) 693-7984. Facsimile or other electronically generated copies will not be accepted. Only firms that submit the forms by 3:00 PM EST, January 24, 2008, will be considered for review of qualifications. Failure to submit SF 330 Part I and II will render the submission non-responsive. Pertinent factors for consideration of qualifications, listed in order of importance, for the Project Team, are (1) Qualifications of Assigned Project Personnel, which considers design capability, project management skills, and construction administration capability; (2) Specialized Experience of Assigned Project Personnel; (3) Capacity to Perform Work in the Required Time; (4) Past Performance on contracts with Government agencies and private industry in terms of cost control, quality of work, and compliance with performance schedules for similar type projects, including past Job Corps Center projects, if applicable; (5) location (preference shall be given to Project Team located in the general geographical area of the project, with knowledge of the locality of the project); and (6) Past Performance on projects utilizing integrated design energy efficient building standards. Applicants are required to include a list of three references with telephone numbers and names of contact persons with their submittal. The Project Teams considered the most highly qualified will have references checked. Project Teams still considered the most qualified following the reference checks will be interviewed. Firms shall include the center name and location in Block No. 1 and Solicitation No. DOL089RP20490 of this FBO Notice in Block No. 3 of the SF 330 Part I, Contract-Specific Qualifications. This procurement is a 100% Small Business Set-Aside. The NAICS Code is 541310 with a Small Business Size Standard of $4.5 million. The firms shall indicate in Block 5(b) of the SF-330-Part II that it is a small business concern as defined in the FAR that meets the size standard established for this solicitation. Federal Acquisition Regulations Subpart 52.219-14, LIMITATIONS ON SUBCONTRACTING applies to this solicitation. At least fifty percent (50%) of the cost of contract performance incurred for personnel shall be expended for employees of the concern. Service-Disabled Veterans-Owned, HUBZone, and/or 8(a) businesses, women-owned small businesses, small disadvantaged businesses, and small businesses are encouraged to submit. Further, small businesses are encouraged to apply for HUBZone certification. Information regarding HUBZone certification can be found at http://www.sba.gov. THIS IS NOT A REQUEST FOR PROPOSAL.