Anti-sweat insulation removal and replacement (CGC resolute)
Closed Solicitation Posted
- Solicitation number
- 70Z080SSNINSULATION
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 238310 Drywall and Insulation Contractors
- Place of performance
- Saint Petersburg, Florida 33701, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of Homeland Security's U.S. Coast Guard is seeking a contractor to remove and replace anti-sweat insulation on the U.S. Coast Guard Cutter RESOLUTE. The key tasks include removing and disposing of existing insulation, installing approximately 680 feet of new insulation around chill water and other lines, treating 770 square feet of interior compartment vertical bulkheads to prevent sweating, and replacing and insulating 20 linear feet of corroded ducting. The work must be performed in accordance with applicable OSHA, NSTM, ASTM, and other standards. The evaluation criteria for this solicitation are not provided.
This solicitation is not set aside for any specific business size or type. The place of performance is St. Petersburg, FL 33701, USA. The solicitation number is 70Z080SSNINSULATION, and the due date for responses is September 23, 2024. The NAICS code for this opportunity is 238310 - Drywall and Insulation Contractors, and the PSC code is 5640 - Wallboard, Building Paper, And Thermal Insulation Materials.
Notice text
ANIT-SWEAT INSULATION REMOVAL AND REPLACEMENT FOR CGC RESOLUTE.
5.2 Detailed Tasks:
5.2.1 The contractor shall remove and dispose of existing insulation in select areas.
5.2.2 Install approx. 680 feet of new insulation around select chill water and other lines ranging from ½” – 4” in diameter in accordance with the publications listed in section 7 of this document. Insulation should be rated to minimize heat transfer over a 60℉
5.2.3 Valves? Approx 20 CHW alone temperature differential with no condensation on the piping or exterior / interior of the insulation material.that may need replacing
5.2.4 Treat approx. 770 square feet of interior compartment vertical bulkheads to prevent all sweating in accordance with the publications in section 7. Bulkheads separating compartments with large temperature differences will be prioritized.
5.2.5 Replace and properly insulate approx. 20 linear feet of ducting that has corroded due to condensation.
5.2 Detailed Tasks:
5.2.1 The contractor shall remove and dispose of existing insulation in select areas.
5.2.2 Install approx. 680 feet of new insulation around select chill water and other lines ranging from ½” – 4” in diameter in accordance with the publications listed in section 7 of this document. Insulation should be rated to minimize heat transfer over a 60℉
5.2.3 Valves? Approx 20 CHW alone temperature differential with no condensation on the piping or exterior / interior of the insulation material.that may need replacing
5.2.4 Treat approx. 770 square feet of interior compartment vertical bulkheads to prevent all sweating in accordance with the publications in section 7. Bulkheads separating compartments with large temperature differences will be prioritized.
5.2.5 Replace and properly insulate approx. 20 linear feet of ducting that has corroded due to condensation.
Files
| File | Type | Posted |
|---|---|---|
| INSULATION SOW FOR CGC RESOLUTE.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Firefighting protection system maintenance | — | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity