Annual Preventive Maintenance and Emergency Repairs/Parts for Okuma machine and tools.

Closed Pre-Solicitation Posted

Not the latest version. See the latest solicitation from .

Solicitation number
W911KF-22-Q-0003
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Anniston, Alabama 36201, United States

Notice details come from SAM.gov. Updated .

About this opportunity

This pre-solicitation notice seeks proposals for annual preventive maintenance and emergency repairs/parts for Okuma machine and tools located at Anniston Army Depot. The Department of the Army Materiel Command Contracting Command Detroit Arsenal requires unlimited on-call emergency repairs and annual inspection/alignment services for several Okuma machine tools. Proposals are due by January 28, 2022 and must include the cost of all labor, tools, diagnostic equipment, transportation, schematics, documentation, and any other services required to repair the machine tools.

There is no set-aside designation for this requirement. Potential offerors should be prepared to perform services under NAICS code 811310 and PSC code J019. The contract will provide maintenance and repairs for an indefinite delivery period to support operations at Anniston Army Depot. Details were not provided on incumbent contractors or estimated value, but the scope requires comprehensive unlimited emergency and preventive maintenance coverage.

Notice text

2 versions

Update #2 · Latest ·

This announcement serves as a synopsis for informational purposes only. This is not an RFQ. Anniston Army Depot intends to solicit a contract for Annual Preventative Maintenance and Emergency Repairs/Parts for Okuma machines and tools at 7 Frankford Avenue, Anniston, AL. The contractor shall be responsible for Annual Preventative Maintenance and Emergency Repairs as defined in a Statement of Work.

This is a Sole Source procurement to Morris South, 350 Electronics Blvd, Huntsville, AL 35824. We encourage any firm that recognizes this item/requested service and can provide supporting evidence in writing that they can provide this item/service to identify themselves.  They may be considered for future requirements.  North American Industry Classification System Code (NAICS) is 811310, and the associated size standard is $8,000,000.00 dollars. This solicitation will be issued electronically in accordance with FAR 4.502, and 5.102(a); therefore, hardcopies will not be provided. Proposals submitted must be in electronic format as stated in the solicitation.  Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: SAM.gov.  Estimated issue date is 27 January 2022. 

CAUTION:  This solicitation will be issued electronically as will any amendments thereto.  Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder’s mailing list.  It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued.  Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal.

POINT OF CONTACT: 

Contract Specialist, 256-235-6614, E-Mail:  ginger.s.homesley.civ@army.mil.

Update #1 ·

Provide unlimited on-call emergency repairs and annual inspection/alignment for the Government owned Okuma machine tools and to include Okuma equipmet to be installed during the period of performance.  The Okuma machine tools are located in multiple buildings at Anniston Army Depot. The contract shall provide the cost of providing all things necessary to perform unlimited emergency repairs/parts and annual inspection/alignments for several machine tools including labor, tools, diagnostic equipment, transporation, schematics, documentation, and any other services to repair the machine tools. 

Notice history

Notice Type Posted
Annual Preventive Maintenance and Emergency Repairs/Parts for Okuma machine and tools. Latest solicitation Solicitation
This notice Original Pre-Solicitation

Similar open opportunities

Opportunity Agency Set-aside Responses due
AF36 PM and ER 7 Frankford Avenueanniston, AL 36201 36201 · NAICS 811310 ACC Warren No set-aside
Preventative Maintenance and Repairs Anniston Army Depot7 Frankford Avenue Anniston, AL 36201 36201 · NAICS 811310 ACC Warren No set-aside
Metal Forming Press Preventative Maintenance, Emergency Repairs and Parts Anniston Army Depot7 Frankford Avenue Anniston, AL 36201 36201 · NAICS 811310 ACC Warren No set-aside
Laser Cutting Machine Preventive Maintenance Corpus Christi, Texas 78419, United States · NAICS 811310 ACC Redstone No set-aside
AF36 Preventative Maintenance and Emergency Repairs Anniston Army Depot7 Frankford AvenueAnniston, AL 36201 36201 · NAICS 811310 ACC Warren No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors