Ammunition and Explosives

PR Number(s): FD20201377048 Item: 0001 NSN: 1336011184636ES CARTRIDGE,IMPULSE P/N: 50-8264-4, P/N: 232-31100-2, Description: CARTRIDGE,IMPULSE|ANY ACCEPTABLE|AGM-86B MISSILE SYSTEM|PERCUSSION|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|CENTER FIRE|NOT RATED|NOT INCLUDED|NOT INCLUDED|EXWT|1336-V780|UN0276|EX1982050067|0.03 STORAGE POUNDS AND 0.03 TRANSPORTATION POUNDS|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|PACS|CARTRIDGES, POWER DEVICE|1.4C Quantity: 315.0000 EA

Destn: FV2172,HILL AIR FORCE BASE,UT ,84056-5707. Delivery: 28 NOV 2014 On or Before, 200.00

PR Number(s): FD20201377048 Item: 0002 DATA IAW DD 1423-1 ATTACHED HERE TO EXHIBIT A

Description: A001 AMMUNITION DATA CARD Quantity: 1.0000 LO

Destn: IAW1423,, , - . Delivery: *ARO IAW DD1423, 1.00 MM

PR Number(s): FD20201377048 Item: 0003 DATA IAW DD 1423-1 ATTACHED HERE TO EXHIBIT A

Description: A002 TEST INSPECTION REPORT,A003 FAILURE ANALYSIS AND CORRECTIVE ACTION, A004 LOT ACCEPTANCE TEST PLAN. Quantity: 1.0000 LO

Destn: IAW1423,, , - . Delivery: *ARO IAW DD1423, 1.00 MM

Duration of Contract Period: On or before 28 Nov 14

Electronic procedure will be used for this solicitation.

All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

The solicitation will be made available through electronic data interchange procedures Electronic Data Interchange (EDI). To obtain and respond to the solicitation electronically, the following information is applicable: www.fbo.gov Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. To include all required reports and data. This part must be acquired from a manufacturing sources(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained.