Airboat Components

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is YPGMSMKS219A and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-99. The associated North American Industrial Classification System (NAICS) code for this procurement is 336612 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-08-15 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Yuma, AZ 85365
The MICC End User requires the following items, Brand Name or Equal, to the following:
LI 001: http://www.airboatpartsonline.com/
Part Number FU1007
40 Gallon Fuel Tank with Sight Tube and Cap
Airboat Fuel Tank With Side Sight Tube, And Cap 16"x 16"x 36". Tank Has Tabs Welded To 36" Sides For Mounting., 1, EA;
LI 002: https://www.fivestarengines.com
Chevrolet 454 / 450 HP High Performance Turn-Key Crate Engine
For 1987 ad earlier applications - Remanufactured OK
Unleaded fuel-compatible
Assembled, with valve covers, timing chain cover, oil pan, harmonic
balancer, flex plate and intake manifold, carburetor, ignition, water pump, fuel pump, upper / lower pulleys etc.
• Sealed Power hypereutectic pistons and rings
• Competition Cams performance camshaft
• Fel-Pro gaskets
• Clevite 77 rod, main and cam bearings
• Melling high-volume oil pump, pickup screen and driveshaft
• Valve guides
• Pioneer harmonic balancer, flexplate, performance valve springs, brass freeze plugs and bolts
• Melling push rods, double-roller timing set
• Professional Products polished dual-plane intake manifold (non-EGR)
• Edelbrock 750 cfm carburetor
• HEI distributor, cap / rotor, 50,000V coil
• Accel spark plug wires, Autolite spark plugs
• PCV valve and line
• Stant superstat thermostat, fuel pump, water pump
• Chrome timing cover, timing tab, upper pulley, lower pulley, air cleaner, valve covers, oil pan,
dipstick/tube, thermostat housing, distributor hold down, and breather
• GM valve locks/retainers
• Engine block, cylinder heads and crankshaft thermally cleaned, shot-blasted, and Magnafluxed
• All crankshafts and reground, oil holes chamfered, and micro-polished
• Thorough cleaning including all oil galleys, engines are absolutely clean inside and out
• All blocks are bored and honed using torque plates
• New cam custom fitted
• Connecting rods fitted with new bolts and resized
• Rotating assembly Sunnen computer balanced (balance sheet included)
• Cylinders heads completely remanufactured, including new guides, new seals, and performance
3-angle valve job., 1, EA;
LI 003: http://www.airboatpartsonline.com/
Part Number Part Number CSNOR20900
Custom Aluminum Airboat Radiator.
Made for Small Block and Big Block Engines.
Mounting Flange on top and bottom.
Sealed with NO Radiator cap, Petcock drain.
• 30.75" Long
• 21.25" Tall
• 3" Wide
• Inlet 1.5" -Outlet 1.75", 1, EA;
LI 004: https://www.centurydrives.com
CH-3 Airboat Belted Reduction Drive Unit 2:1 ratio
Fits drive belts 5" wide and can use HPPD Plus style belts
Rated for 600 horse power engines
Can bolt to GM V-8, Small Block, V-8 Big Block, and GM Diesels., 1, EA;
LI 005: http://www.classicairboats.com
Engine Stand
Fits Engine, Gear Reduction, Hub, and Propeller defined in this solicitation and quoted by seller such that the assembly of these items will be functional when operated normally., 1, EA;
LI 006: http://www.airboatpartsonline.com
Part Number EX1014
Mufflers 3"
• 20" Over All Length.
• 14" Body.
• Outlets Are Offset 3", 2, EA;
LI 007: https://www.overtons.com
ITEM: 300226
SeaStar Solutions Lubri-Core Type 3300 Universal Control Cable
Engineered specifically for the marine environment
10-32 threaded ends.
20-feet length, 1, EA;
LI 008: https://diamondbackairboats
Prop Guard
Fits Engine, Gear Reduction, Hub, and Propeller defined in this solicitation and quoted by seller such that the assembly of these items will be functional when operated normally., 1, EA;
LI 009: http://www.airboatpartsonline.com
Part Number EX1012
Stainless Steel Exhaust Flex Pipe 3"
10 feet overall length
(total order will be 20 feet), 2, EA;
LI 010: http://www.airboatpartsonline.com
Part Number EXS1001
Stainless Steel Headers for Big Block Chevrolet (pair)
• 3/8" Flange
• 1.75" Inlet
• 3" Collector, 1, EA;
LI 011: http://www.airboatpartsonline.com
Part Number GA1003
Faria Lighted Electric Marine Automotive Gauge Package
• x1 3" Tachometer.
• x1 2" Voltage Gauge.
• x1 2"Coolant Temperature Gauge.
• x1 Coolant Temperature Sensor.
• x1 2" Oil Pressure Gauge.
• x1 Oil Pressure Sending Unit.
*Brackets and Hardware Included*, 1, EA;
LI 012: https://www.overtons.com
ITEM: 329550
SeaStar Jet Boat Control
• Precise throttle control
• Weatherproof exterior
• Dual action design uses single lever
• Uses 33c type cables, 1, EA;
LI 013: https://whirlwindpropellers.com
Whisper Tip 2.0 Complete Assembly with Hub
Diameter 78" î'¡
Rotation Left î'¡
Propeller 3 Blade Complete Propeller
Electro-formed nickel leading edge
All composite
Optimal blade twist
Swept-tip design decreases drag and noise
Rated up to 600 Horsepower Big Block 454 with 2:1 Reduction
BLADE WIDTH 12"
MAX RPM 2700
PERFORMANCE RPM RANGE 2200 â€" 2700, 1, EA;
LI 014: http://www.airboatpartsonline.com
Part Number GA1004
3 Position Starter Switch., 1, EA;
LI 015: http://www.airboatpartsonline.com
Part Number GA1002
2"Faria Hour Meter., 1, EA;
LI 016: http://www.airboatpartsonline.com
Part Number  EXS1006
FEL-PRO V8 Big Block Header Gasket, 2, EA;
LI 017: http://www.airboatpartsonline.com
Part Number ENM1010
Big Block Engine Mount
Performance Early Style Motor Mount for Chevy V8 Engines
Polyurethane Components, 2, EA;
LI 018: http://www.airboatpartsonline.com
Part Number CS10331
Lev-R-Vent Radiator Cap
Stant Lev-R-Vent 16 LB Radiator Lever Vent Cap.Â
Use With Automotive Airboat Engines, 2, EA;
LI 019: http://www.airboatpartsonline.com
Part Number CSMOR63730
Moroso Radiator Hose Filler.Â
Cast Aluminum 1 1/2" Hose To 1 1/2" Hose. Â
In-Line Filler Neck For Automotive Style Engines., 1, EA;
LI 020: http://www.airboatpartsonline.com
Part Number ENA1011
Large capacity " Hayden " oil cooler, 1, EA;
LI 021: http://www.airboatpartsonline.com
Part Number CO1010
Radiator mounting kit
Kits Includes
5/16" x 4.5' Stainless bolts x 4
5/16" flat washers x 8
5/16" Nylocks x 4
Rubber bushings x 4
24" x 2" aluminum channel x 2, 1, EA;
LI 022: https://www.sltrailers.com/Bobcat_Trailers.html
Blown Sand & Dust trailer requirements:
• Deck
o Length: 18 feet
o Width between fenders: 6.5 feet minimum
o Deck Material: Diamond Plate Steel, 10 gage minimum
o Deck Height Maximum: 16 inches above ground level
o Cross members: 12 inches center-to-center
o No “dove tailâ€
o No “Rampsâ€
o Unenclosed Deck
• Axles
o Twin axle
o G.V.W.R. Minimum: 12,000 lb
o Brakes: Electrical
o Tires: Minimum diameter 30 inches
• Fenders: Minimum 10 gage
• Ball Coupler: Adjustable
• Drop Leg Jack: 10,000 lb
• All necessary lighting: Stop, Tail, & Turn
o Wiring harness to fit 7 way flat pin connector
• Tool Box: Mounted to tongue
• Fully painted
• Spare tire
o Full size
o Mounted to trailer
• Safety Chains
All requirements shall be met., 1, EA;
Solicitation and Buy Attachments
***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.
The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions â€" Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.
IAW FAR 52.212-2; Evaluation - Commercial Items, the following factors shall be used to evaluate offers: Technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.
IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance
Shipping is FOB Destination CONUS (CONtinental U.S.).
New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.
Submitted Quotes will be valid for 45 days after the auction closing.
No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an Â"all-or-nothingÂ" basis.
This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).
IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.
The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf
"AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command
Office of Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840
Packages sent by FedEx or UPS should be addressed to:
Headquarters U.S. Army Materiel Command
Office of Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp.
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."
"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"
Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.
Wide Area WorkFlow Payment Instructions
252.204-7012 Safeguarding of Unclassified Controlled Technical Information
All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.
This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.
Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.
.