Afto 350 repairable item processing tag
Closed Solicitation Posted
- Solicitation number
- 547-819R1
- Agency
-
Government Publishing Office
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 323111 Commercial Printing (except Screen and Books)
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
This federal contract opportunity is for the production of AFTO 350 Repairable Item Processing Tags for the Government Publishing Office (GPO). The requirement includes proofing, printing, numbering, corner cutting, drilling, packing, and shipping of 3,000,002 tags. The tags must be printed in black ink, with specific construction and numbering requirements. The quality assurance level is III, and the tags must provide clean, dense, and legible type matter. The solicitation has a due date of September 20, 2024.
This opportunity is not set-aside for any specific business size or category. The NAICS code is 323111 - Commercial Printing (except Screen and Books), and the PSC code is T011 - Photo/Map/Print/Publication- Print/Binding. There is no incumbent information provided, and the award value or budget range is not specified. The tags must be delivered to the GPO, a civilian federal agency.
Notice text
PRODUCT: This specification is for proofing, printing, numbering, corner cutting, drilling, packing, and shipping of tags
TITLE: AFTO 350 REPAIRABLE ITEM PROCESSING TAG
QUALITY LEVEL: III Quality Assurance Through Attributes (GPO Publication 310.1, effective May 1979 (Rev. 09-19)) applies.
QUANTITY: 3,000,002
TRIM SIZE: 3-1/4 x 7-1/2"
DESCRIPTION:
PRINTING: Tag prints face and back in black ink, consisting of text and lines. Printed tags must provide clean, dense, and legible type matter. An approximate 5/16 x 15/16 screened area will print at the bottom of back side of tag; screened area is to remain open and not fill in. Print head-to-head.
CONSTRUCTION: Drill/punch one round hole; 1/4" in diameter, centered on the top 3-1/4" Dimension, center of hole 3/16" from top of tag. Reinforce both sides of tag with a hard fiber patch. No metal eyelet or stringing required. Corner Cut: Clip both corners with diagonal cuts at the top left and right (patch end).
NUMBERING: Number each tag on the face side in two (2) places (same 6-digit number in each place), parallel to the 3-1/4" way, in the TAG NO. areas. Number from 0000003 through and including 3000002 & use 0000001-0000002 For Samples only – (See Distribution) repeating the sequence until the entire quantity is accomplished. DO NOT INCLUDE ANY NUMBERS THAT END IN 000 (three zeroes). Numbers to be 3/16 -l/4" high. The number at the bottom of the tag must be placed one-sixth (l/6") from bottom edge of tag to ensure visibility in file utilized; the corresponding number should also be placed l/6" up from the perforation. Numbering is to be in black ink. There are to be no missing numbers other than the ending 000 numbers.
PERFORATION: Perforate each tag the full 3-1/4'' way) approximately 2" from bottom. The perforation
is to align with the rule just above the text for item 16. SUPPLY DOCUMENT NUMBER on face side of
tag and just above the text for item 29 on the back side of tag.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Vet Center Outreach Material | Government Publishing Office | No set-aside | |
| Labels on Synthetic Substrates. | Government Publishing Office | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity