Abrasive Belt Grinder
Closed Solicitation Posted
- Solicitation number
- W911S226U3480
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 327910 Abrasive Product Manufacturing
- PSC
- 3415 Grinding Machines
- Place of performance
- Crane Army Ammunition ACTIVITY300 HW 361 Bldg 148CRANE, Indiana 47522NO Friday Delivery 47522
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum seeks an Abrasive Belt Grinder, Model B-190-5-GW-AA-LAF or equivalent, with proposals due June 30, 2026. The procurement is set aside for Total Small Business.
Place of performance is Bloomfield, Indiana. The grinder must meet detailed specifications including a 5 HP, 3600 RPM, 184T frame TEFC motor operating on 208, 230, or 460 VAC, 3 phase, 60 Hz power. The unit requires air-assisted belt tensioning with 1-inch by 90-inch abrasive belts, a 6-inch crowned aluminum drive pulley delivering approximately 5500 feet per minute belt speed, an 8-inch diameter by 1-inch wide serrated contact wheel at 90 durometer, and a swing frame style abrasive belt guard with 4-inch diameter exhaust outlet compatible with standard dust collection systems. The grinder must include a full voltage magnetic pushbutton starter with integrated motor overload protection housed in a NEMA 4 enclosure, front-mounted belt tracking adjustment, T-style operator handle bars, an air assist cylinder with manual hand valve for adjustable grinding pressure, an adjustable height lathe attachment fixture equivalent to model M-12468-D, and an adjustable gage wheel. Equipment must be delivered fully assembled and ready for operation. NAICS code is 327910, Abrasive Product Manufacturing; PSC code is 3415, Grinding Machines.
Notice text
Salient Characteristics ? Abrasive Belt Grinder Model B-190-5-GW-AA-LAF EquivalentThe following salient characteristics define the minimum acceptable requirements for an Abrasive Belt Grinder. Any offered product must meet or exceed all characteristics listed to be considered technically acceptable.1. Motor SpecificationsUnit shall include a 5 HP, 3600 RPM, 184T frame, TEFC motor.Motor must operate on 208, 230, or 460 VAC, 3 phase, 60 Hz power.Final operating voltage will be identified at time of order.2. Starter and ControlsMust include a full voltage magnetic pushbutton starter.Must include integrated motor overload protection.Controls must be housed in a NEMA 4 enclosure.3. Abrasive Belt TensioningGrinder must use abrasive belts sized 1 inch by 90 inches.System must include air assisted belt tensioning.4. Belt Guard and Dust Collection InterfaceMust include a swing frame style abrasive belt guard.Guard must include a 4 inch diameter exhaust outlet compatible with standard dust collection systems.Dust collector is not included.5. Drive PulleyMust include a 6 inch crowned aluminum drive pulley.Pulley must deliver approximately 5500 feet per minute abrasive belt speed.6. Contact WheelMust include an 8 inch diameter by 1 inch wide, 90 durometer, serrated face contact wheel.7. Belt Tracking AdjustmentBelt tracking must be adjustable using a front mounted tracking knob accessible during operation.8. Operator Handle BarsGrinder must include T style handle bars for operator control and stability.9. Air Assist Grinding PressureSystem must include an air assist cylinder with a manual hand valve.Must allow adjustable grinding pressure using standard castings.10. Lathe Attachment FixtureMust include an adjustable height lathe attachment fixture equivalent to model M-12468-D.11. Adjustable Gage WheelMust include an adjustable gage wheel positioned beside the contact wheel to control grinding depth.12. Operational ReadinessEquipment must be delivered fully assembled and ready for operation.Abrasive belts and dust collection equipment are not included.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Bed-Knife Grinder | Air Combat Command | No set-aside | |
| Wheel set, abrasive | Construction and Equipment | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity