A-10 FLAP TRAP/TRACK PARTS (5 PNs)

AMENDMENT 0001, ADDED TDPS 

AMENDMEMT 0002, UPDATED TDP NSN 1560-01-059-6480FJ & EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST

AMENDMENT 0003 (6MAY2022),  UPDATED TDP 4 NSNs & CLARIFIED FAIRCHILD'S QUALITY REQUIREMENTS & ATTACHED SPEC G-J301_REV_B_CLEANING & ETCHING REQUIREMENTS  

AMENDMENT 0004 (18MAY202): Update SECTION L&M Extend RFP TO 1JUN2022. 

AMENMENT 0005 (19MAY2022): Correct SECTION M heading. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: LPTA.  

6. Acquistion Schedule UPDATED 18MAY2022 via AMENDMENT 0004: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-WED 1JUN2022;  Award within 30 days after RFP close-out date or by 30JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

AMENDMENT 0001, ADDED TDPS 

AMENDMEMT 0002, UPDATED TDP NSN 1560-01-059-6480FJ & EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST

AMENDMENT 0003 (6MAY2022),  UPDATED TDP 4 NSNs & CLARIFIED FAIRCHILD'S QUALITY REQUIREMENTS & ATTACHED SPEC G-J301_REV_B_CLEANING & ETCHING REQUIREMENTS  

AMENDMENT 0004 (18MAY202): Update SECTION L&M Extend RFP TO 1JUN2022. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: LPTA.  

6. Acquistion Schedule UPDATED 18MAY2022 via AMENDMENT 0004: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-WED 1JUN2022;  Award within 30 days after RFP close-out date or by 30JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

AMENDMENT 0001, ADDED TDPS 

AMENDMEMT 0002, UPDATED TDP NSN 1560-01-059-6480FJ & EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST

AMENDMENT 0003 (6MAY2022),  UPDATED TDP 4 NSNs & CLARIFIED FAIRCHILD'S QUALITY REQUIREMENTS & ATTACHED SPEC G-J301_REV_B_CLEANING & ETCHING REQUIREMENTS    

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule UPDATED 26APR2022 via AMENDMENT 0002: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

**PLEASE NOTE RFP AMENDMEMT 0002 EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST. **  

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule UPDATED 26APR2022 via AMENDMENT 0002: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

**PLEASE NOTE RFP AMENDMEMT 0002 EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST.  Please note that SAM.gov is not allowing controlled files to be downloaded.  I will submitt a ticket tomorrow morning to get this glitch fixed. In the meantime, if you need the controlled files sent to you via DoD SAFE please e-mail the Contracting Officer at leslie.evans.1@us.af.mil.  Thank you.**  

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule UPDATED 26APR2022 via AMENDMENT 0002: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

**PLEASE NOTE RFP AMENDMEMT 0002 EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST.  Please note that SAMs. gov is not allowing controlled files to be downloaded, I will submitt a ticket tomorrow morning to get this glitch fixed. In the meantime, if you need the controlled files sent to you via DoD SAFE please e-mail the Contracting Officer at leslie.evans.1@us.af.mil.  Thank you.**  

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule UPDATED 26APR2022 via AMENDMENT 0002: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

**PLEASE NOTE RFP AMENDMEMT 0002 EXTENDED THE RFP CLOSE-OUT DATE TO WED 18MAY2022 @ 4PM MST.  Please note that SAMs. gov is not allowing controlled files to be downloaded, I will submitt a ticker tomorrow morning to get this glitch fixed. In the meantime, if you need the controlled files sent to you via DoD SAFE please e-maile at leslie.evans.1@us.af.mil.  Thank you.**  

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule UPDATED 26APR2022 via AMENDMENT 0002: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

**PLEASE NOTE AMENDMEMT 0002 RFP EXTENDED TO WED 18MAY2022.  Please note that SAMs. gov is not allowing controlled files to be downloaded, I will submitt a ticker tomorrow morning to get this glitch fixed. In the meantime, if you need the controlled files sent to you via DoD SAFE please e-maile at leslie.evans.1@us.af.mil.  Thank you.**  

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule UPDATED 26APR2022 via AMENDMENT 0002: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule uPDATED 26APR2022: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-18MAY2022;  Award NLT 30 days after RFP close-out date or by 17JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-11MAY2022; DCMA OTD rate due NLT 2MAY2022; Award NLT 30 days after RFP close-out date or by 10JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  After submitting the access request the offeror must e-mail the PCO at leslie.evans.1@us.af.mil so the PCO can approve the access request.  Once the technical data is downloaded please let the PCO know if there are any technical data missing to meet the requirement and deliver serviceable assets. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-11MAY2022; DCMA OTD rate due NLT 2MAY2022; Award NLT 30 days after RFP close-out date or by 10JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Technical data is export controlled and thus, the potential offeror must request access.  In order for the PCO approve the request the potential offeror must provide in their request their CAGE code so the PCO can verify the firm has an active DD2345, Military Technical Data Agreement.  Once the technical data is downloaded please let the PCO know if there are any data missing. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-11MAY2022; DCMA OTD rate due NLT 2MAY2022; Award NLT 30 days after RFP close-out date or by 10JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is attached to the RFP SECTION J via RFP Amendment 0001.  Please let the PCO know if there are any specs/drawings missing. 

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration. 

This is a formal solicitation or a Request For Proposal (RFP).  The RFP is in accordance with Federal contract law.  

1. REQUIREMENT A-10 FLAP TRAP/TRACK PARTS:

1. CLIN 0001 PN: 160D611631-3 NSN: 1560-01-059-6480FJ, Inboard Flap Trap Assy (MIN Qty 25EA; MAX Qty 75EA)
2. CLIN 0002 PN: 160D611631-4 NSN: 1560-01-063-1116FJ, Inboard Flap Trap Assy (MIN Qty 22EA; MAX Qty 72EA)
3. CLIN 0003 PN: 160D612105-13 NSN: 1560-01-227-2073FJ, Flap Track Rib Outboard (MIN Qty 25EA; MAX Qty 75EA)
4. CLIN 0004 PN: 160D611632-5 NSN: 1560-01-228-3678FJ, Flap Track Assy, Inbound  (MIN Qty 55EA; MAX Qty 135EA)
5. CLIN 0005 PN: 160D611632-6 NSN: 1560-01-522-2407FJ, Flap Track Assy Inbound  (MIN Qty 24EA; MAX Qty 104EA)

2. Acquisition Type: Full & Open Competition to Qualified Manufacturers – Total Small Business Set-Aside. 

3. Contract Type: FFP Single-Award IDIQ with a 5-year ordering period

4. Acquistion Threshold and Scope: Per the Independent Government Estimate (IGE) the total estimated acquisition value is less than $5M threshold and thus, the Government does not have the authority and clearance to exceed this acquisition scope.  Foreign participation is NOT permitted at the prime contractor level. 

5. Source Selection Type: Tradeoff lowest priced with unsatisfactory performance risk for next lowest priced with satisfactory performance risk.  Please Note: On-Time-Delivery (OTD) rate submitted by DCMA is due NLT 10 days before the RFP closing date.   

6. Acquistion Schedule: Post Synopsis 9MAR2022-10APR2022; Post RFP 11APR2022-11MAY2022; DCMA OTD rate due NLT 2MAY2022; Award NLT 30 days after RFP close-out date or by 10JUN2022.

7. Technical Data Package (TDP) Access:  Offers shall be IAW the current TDP.   The TDP is linked to the notice.  To access TDP contractor must have a registered role in SAM.gov.  TDP can be also found by searching for the purchase request (PR) number “FD2020-22-00176”.  Select “Request Access” and e-mail the PCO so he/she can grant access to the TDPs.  Please note the PCO does not receive notifications of the request any other way.   

8. Acquisition Subject to Qualification Requirement.  Replenishment parts must be acquired so as to ensure the safe, dependable, and effective operation of the military aircraft, the A-10s, and thus military aircraft parts are subject to qualification requirements per FAR 17.7, Acquisition of Replenishment Parts and FAR 9.2, Qualification Requirements.  Potential offerors must be qualified manufacturer(s) to bid. Potential offerors may submit a Source Approval Request (SAR) per the attached Source Qualification Statement Spares (SQSS).  All responsible qualified manufacturers may submit a bid, proposal, or quotation which shall be considered by the agency.  As prescribed in FAR 9.202 (e) and (d), the Contracting Officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification nor refer challenges to the USAF’s qualification requirements to the small business administration.