4D Tech NanoCam HD Dynamic Optical Profiler
Closed Special Notice Posted
- Solicitation number
- 80NSSC25894374Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333310 Commercial and Service Industry Machinery Manufacturing
- PSC
- 7E20 IT and Telecom - End User: Help Desk;Tier 1-2,Workspace,Print,Output,Productivity Tools (HW/Perp SW)
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The National Aeronautics and Space Administration Shared Services Center (NASA/NSSC) has issued a Special Notice for a sole source contract to procure a 4D Tech NanoCam HD Dynamic Optical Profiler for the NASA Marshall Space Flight Center (MSFC). The contract will be issued directly to 4D Technology Corporation, located in Tucson, Arizona, under the authority of FAR 13.106-1(b)(1)(i). NASA has determined that 4D Technology Corporation is the sole provider of this specific optical profiler system. The procurement will follow the provisions of FAR Part 12 and FAR Part 13, focusing on commercial items and services. The contract falls under the NAICS Code 333310 for Commercial and Service Industry Machinery Manufacturing.
The primary objective of this Special Notice is to acquire a specialized NanoCam HD Dynamic Optical Profiler system with specific technical requirements, including a high-resolution CMOS sensor, LED, autofocus capabilities, and associated computer and tripod equipment. Interested organizations may submit their capabilities and qualifications in writing to the designated points of contact, Cody Guidry (Procurement Specialist) or Shari Trigg (Contracting Officer), no later than 1:00 p.m. Central Standard Time on February 6, 2025. The government will evaluate submitted capabilities solely to determine whether to conduct the procurement on a competitive basis, with the discretion to proceed with the sole source approach. Oral communications are not acceptable in response to this notice. The delivery requirement specifies a 6-week lead time after receipt of order, with delivery to NASA MSFC's Central Receiving Building 4631 in Huntsville, Alabama. The notice also references NASA Clause 1852.215-84, which provides information about the acquisition's ombudsman.
Notice text
Synopsis:
NASA/NSSC has a requirement for 4D Tech NanoCam HD Dynamic Optical Profiler.
NASA/NSSC intends to issue a sole source contract to 4D TECHNOLOGY CORPORATION: 3280 E HEMISPHERE LOOP STE 146; TUCSON, AZ 85706 under the authority of FAR 13.106-1(b)(1)(i). It has been determined that 4D TECHNOLOGY CORPORATION is the sole provider of 4D Tech NanoCam HD Dynamic Optical Profiler.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 333310.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact no later than 1:00 p.m. Central Standard Time on 2/6/2025. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Primary Point of Contact:
Cody Guidry
Procurement Specialist
Cody.d.guidry@nasa.gov
Secondary Point of Contact:
Shari Trigg
Contracting Officer
Shari.trigg@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0037519 Tab 07 SOW_Redacted.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| CSI Digital Correlation Systems | Shared Services Center | No set-aside | |
| HAAS CNC Machine | Shared Services Center | No set-aside | |
| INRODES Supplemental RDRE TCA Hardware | Shared Services Center | No set-aside | |
| RTD Embedded Technologies | Shared Services Center | No set-aside | |
| Portable CNC plasma and oxy-fuel cutting system | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity