3rd Stage Turbine Vanes

(1) Action Code: N/A.

(2) Date: 9 April 2019

(3) Year: 2019

(4) Contracting Office Zip Code: 73145

(5) Product or Service Code: J048

(6) Contracting Office Address:

DEPARTMENT OF THE AIR FORCE (DAF)

BLDG 3001 SUITE 1AG1-97E

TINKER AFB, OK. 73145

(7) Subject:

Synopsis for purchase of the repair/overhaul of the F100-220/220E 3rd stage turbine vanes.

(8) Proposed Solicitation Number:

FA8121-19-R-0018

(9) Closing Response Date:

Anticipated solicitation issue date: 1 May 2019

Anticipated solicitation closing date: 30 May 2019

(10) Contact Point or Contracting Officer:

MATTHEWS, CHRIS

Contracting Officer

(405) 734-4627

christopher.matthews.22@us.af.mil

(11) Contract Award and Solicitation Number: N/A.

(12) Contract Award Dollar Amount: N/A.

(13) Contract Line Item Numbers:

CLIN 0001, Overhaul of 3rd Stage Turbine Vanes (USAF), Critical Safety Item

NSN: 2840-01-445-5773NZ

Part number: 40484183CLN

Description: Repair/Overhaul

CLIN 0002, Data Requirements, not separately proced

(14) Contract Award Date: N/A.

(15) Contractor:

There is only one currently approved source: Chromalloy New York, 10962-2510

(16) Description:

(a) National Stock Number (NSN): 2840-01-445-5773NZ

(b) Qualification Requirement (QR):

Sources must be qualified prior to being considered for award. See attached RQR-PSD-1 for qualification and/or re-substantiation requirements. Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirements at the time of award IAW FAR clause 52.209-1. Award will not be delayed to qualify new sources.

(c) Manufacturer, including part number:

The original equipment manufacturer is United Technologies Corporation DBA Pratt Whitney (77445)

P/N 4084183CLN

(d) Size, dimensions, or other form, fit or functional description:

Material: nickel alloy overall

Design type: axial compressor

Engine section location: turbine

Stage number: 3

Overall length: 2.246 inches minimum and 2.254 inches maximum

Overall width: 2.036 inches minimum and 2.084 inches maximum

Overall height: 4.717 inches minimum and 4.737 inches maximum

End item identification: F100-PW-220/220E 3rd stage vane

Criticality Code:F

(e) Predominant material of manufacture: Not available

(f) Quantity, including any options for additional quantities:

Best Estimated Quantity:

Basic - 3,750

(g) Unit of issue: Unit: Each

(h) Destination information:

FOB: Origin

DoDAAC: SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145

(i) Delivery schedule:

30 days ARO at rate of 250 ea. per month until complete. Early delivery is acceptable.

(j) Duration of the contract period:

One year/12 months

(k) Sustainable acquisition requirements: N/A.

(l) Intended source and insert a statement of the reason justifying the lack of competition:

(i) Chromalloy New York

330 Blaisdell RD

Orangeburg, NY 10962-2510

UNITED STATES

CAGE: 2D505

(ii) There is only one approved sources for this remanufacturing effort; Chromalloy New York. Due to the complexity and criticality of this item, only pre-approved sources meet the USAF requirements. Chromalloy, is the only known contractor that has the data, parts and expertise to remanufacture these items to meet the Government's requirements.

(m) One or more of the items under this acquisition is subject to Free Trade Agreements.

(n) Set-aside: N/A

(o) NAICS: 336412

Export Control: The Contractor shall comply with all applicable laws and regulations regarding export-controlled items, including, but not limited to, the requirement for contractors to register with the Department of State in accordance with the ITAR. The Contractor shall consult with the Department of State regarding any questions relating to compliance with the ITAR and shall consult with the Department of Commerce regarding any questions relating to compliance with the EAR. The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause. Nothing in the terms of this contract adds, changes, supersedes, or waives any of the requirements of applicable Federal laws, Executive orders, and regulations, including but not limited to-

(1) The Export Administration Act of 1979, as amended (50 U.S.C. App. 2401, et seq.);

(2) The Arms Export Control Act (22 U.S.C. 2751, et seq.);

(3) The International Emergency Economic Powers Act (50 U.S.C. 1701, et seq.);

(4) The Export Administration Regulations (15 CFR Parts 730-774);

(5) The International Traffic in Arms Regulations (22 CFR Parts 120-130)

(6) Executive Order 13222, as extended. The Contractor shall include the substance of this clause, including this paragraph (e), in all subcontracts.

Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award.

ALL SYNOPSES:

An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

.