3805-- EQUIPMENT: HOLDER MODEL C70 - Ready (Ralf)

Scope of Work

Contractor to provide and deliver:

Holder C70

Specifications:

HOLDER C70SC MULTIFUNCTIONAL CARRIER HOLDER

CABIN

Perfect view of attachments and maximum working comfort

Comfort cabin with air conditioning and 360° circumferential visibility

Sliding windows on both sides

Heated windshield and mirrors

Very spacious even for tall and big drivers

Air-suspended driver's seat incl. seat-heating, height-adjustable and longitudinally adjustable, with longitudinal-horizontal suspension

2-person cabin with full-fledged passenger seat

OPERATING CONSOLE

Intuitive operation enables minimum fatigue and easy operation

Adjustable armrest mounted to the seat

1-hand operation

The most important functions on the joystick including forward/reverse, speed and constant drive control and operation of the control valves

Drive program control for four or five driving and working steps

Including limit load control adjusts the driving speed to performance on the front attachment automatically

SERVICE ACCESS

Daily service work possible without disassembling the attachments

Over-engine platform can be raised hydraulically to provide easy access to the engine compartment without the necessity to remove the attachments

Hydraulically tiltable cab Swing-out tanks on both sides (for fuel and hydraulic oil)

Battery is accessible from the outside for e.g., jump starting during winter FRONT AND

REAR ATTACHMENT

Front power lift is movable 3-dimensionally and double-acting, with vibration damping, arrester hooks adjustable from CAT IN to CAT I

Double-acting rear power lift with vibration damping, arrester hooks are adjustable from CAT IN to CAT I

Mechanical PTO shaft front

Hydraulic PTO shaft rear HOLDER POWERDRIVE

Four 24 in³ / 400 cm³ strong wheel motors, the PowerDrive provides 40 % more towing power and 50 % more climbing capability than regular all-wheel drives.

Transport mode the torque of the wheel motors is reduced by half and the rear axle is deactivated to reach maximum driving speed at a much lower engine speed

Switching between all-wheel and two-wheel drive as well as between full and half wheel motor use can take place automatically at all times, the driver can focus fully on the application or the road. Including four-wheel brake system for more safety.

ATTACHMENT AREAS

3 attachment areas: standard front lift and optional rear lift, as well as the 3rd area over the engine

Easy attachment mounting: one-person and no tools required STEPLESS DRIVING

Up to 25mph / 40 km/h

Working: speed control via rotary potentiometer on the joystick

Alternatively, speed control via foot throttle at constant PTO shaft speed = SDS traction drive ELECTRO-HYDRAULIC ATTACHMENT RELIEF

Weight of the attachment can be transferred to the entire vehicle steplessly when turning around on a hillside WHEEL-LOAD COMPENSATION

Ensures that all four wheels are in permanent contact with the ground, even in case of steep or uneven terrain and when driving over obstacles

QUICK CHANGE DEVICE

Standardized interfaces implement can be changed quickly and easily

Front attachments are hung on two catching hooks on the front lift (CAT IN, CAT I), the fixing takes place with bolts at the top link

Rear constructions as flatbeds, containers or spreaders are simply pushed on the attachment frame and fixed with two bolts

Hydraulic hoses have to be attached to the drip-free quick-release couplings

Additional Features

4-wheel brake

Inner mudguard against dirt ingress

Electronic hand and foot control

Digital combi display to show different vehicle functions Similar models may be shown

ENGINE

Engine: Kubota 4-cylinder 4-stroke turbo diesel Tier 4 final

Displacement

Displacement:160 in³ / 2615 cm³

Power

Power: 48 kW (65 HP)

Torque

Torque: 165 lbf ft / 225.0 Nm

Cooling

Cooling: Water cooling

Fuel tank capacity

Fuel Tank Capacity: 17 gal / 65 l

DRIVE

Drive

Drive: Hydrostatic traction drive, controlled digital-electrically, stepless road speed control, suspended front and rear axle; PowerDrive via four wheels of the same size

Differential lock

Differential Lock: Mechanical at the front and rear, simultaneously switchable electrohydraulically, acts on both axles at 100 %

Maximum speed

Maximum Speed: 25 mph / 40 km/h

PTO shafts

PTO Shaft: Includes optional: power-switchable, independent PTO shaft, can be switched separately at the front and rear Front: mechanically powered, 1000 rpm or optionally 540 rpm Rear: hydraulically powered, 540 rpm Size: 1 3/8 inches

Brakes

Brakes: Hydraulically actuated four-wheel brake, electrically actuated stop brake on the front axle

HYDRAULICS

Hydraulics

Hydraulics: Hydraulic pump 9 US gpm / 35 l/min optionally extendable with additional device variable displacement pump 19 US gpm / 70 l/min

Hydraulic oil quantity

Hydraulic Oil Qty: 9.7 gal / 37 l

Lifting force

Lifting Force: Front 2425 lb. / 1100 kg Rear 2425 lb. / 1100 kg

Three-point lift

Three Point Lift: Standard three-point, arrester hook steplessly adjustable from CAT IN to CAT I

Additional control valves

Additional Valve Control: High expandability, adapted for the purpose

WEIGHT

Empty Weight: C 70 SC: 4250 - 5390 lb. / 1928 - 2445 kg C 70 TC: 4605 - 5738 lb. / 2089 - 2603 kg

Permissible total weight

Permissible Total Weight: 7715 - 8820 lb. / 3500 - 4000 kg

Permissible axle weight

Permissible Axle Weight: Front 5070 lb. / 2300 kg Rear 5070 lb. / 2300 kg

Tow bar load on the trailer coupling

Tow Bar Load on the Trailer Coupling: max. 1320 lb. / 600 kg

Towing capacity

Tow Capacity: Unbraked 3310 lb. / 1500 kg Overrun braked 7715 lb. / 3500 kg

Maximum payload

Maximum Pay Load: C 70 SC: 4120 lb. / 1872 kg (40 km/h) C 70 TC: 3770 lb. / 1711 kg (40 km/h)

DIMENSIONS

Dimensions

eel base

Wheelbase: C 70 SC: 72 in / 1820 mm C 70 TC: 74 in / 1870 mm

Total length

Total Length: C 70 SC: 115 - 148 in / 2928 - 3770 mm C 70 TC: 130 - 165 in / 3301 - 4190 mm

Total height

Total Height: C 70 SC: 81 - 89 in / 2050 - 2260 mm C 70 TC: 87 - 89 in / 2220 - 2272 mm

Total outer width

Total Outer Width: C 70 SC: 46 - 60 in / 1170 - 1530 mm C 70 TC: 54 - 60 in / 1360 - 1530 mm

Turning circle inside

Turning Circle: C 70 SC: From 59 in / 1490 mm C 70 TC: From 64 in / 1620 mm

With the follow options and accessories:

50 Box Blower

1/3 CY Dump Body

50 3 Point Angle Plow

1/3 CY Sander

2-year warranty

Filters required for maintenance for two years.