3066 NAO Derrickboat Elizabeth Replacement

***The purpose of Amendment 0002 to W912BU26BA015 is to provide RFI questions and responses and to update Section J to include revision numbers.*** ***The purpose of Amendment 0001 to W912BU26BA015 is to extend the offer due date to 26 May 2026, 2:00PM EDT.*** This is a combined synopsis/solicitation for commercial products prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number W912BU26BA015 is issued as an Invitation for Bid (IFB) for one new steel derrickboat for the Army Corps of Engineers, Norfolk District, for use in support of its various missions in accordance with all specifications. This acquisition is set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The principal dimensions of the derrickboat shall be as follows: Length Overall (Molded) 105 ft, Beam (Molded) 30 ft, Beam (w/ pipe fendering) 30 ft 10.75 in, Hull Depth Amidships (Molded) 8 ft, Draft Amidship (Full Load with 70,000 lb deck cargo) 5 ft, Total Propulsion Power at Continuous Rating 1000-BHP, Maximum Fuel Capacity 2,878 gallons. There will be liquidated damages associated with this procurement. Bid guarantee, payment, and performance bonding are required. NAICS code is 336611; Ship Building and Repair. BASIS FOR SELECTION OF AWARD: Award shall be made to the lowest-priced bidder who is determined to be responsive and responsible. BID SUBMISSION: Offerors shall submit their bid no later than 1400 EDT on 25 May 2026 as follows: The Offerors bid shall be submitted electronically via Procurement Integrated Enterprise Environment (PIEE), as described below. The Offerors bid shall not contain classified data. The use of hyperlinks in bids is prohibited. NOTE: The only authorized transmission method to this solicitation is electronically via PIEE Solicitation Module online submission. NO OTHER TRANSMISSION METHODS (EMAIL, FACSIMILIE, REGULAR MAIL, HANDCARRIED, ETC.,) WILL BE ACCEPTED. ADDITIONAL INFORMATION: Specific information pertaining to this procurement is available in the Solicitation. The Solicitation documents are posted on the SAM.gov website. It is, and will continue to be, the responsibility of all potential bidders to monitor the SAM.gov and PIEE websites for any amendments, updates, responses to industry questions/comments, etc. The Government will not be maintaining a mailing list. POINT-OF-CONTACT: The Primary Contract Specialist for this Solicitation is Katie Sayers at katie.l.sayers@usace.army.mil. Any communication regarding this notice should be made in writing sent via email and must identify the Solicitation number, company name, address, phone number and point of contact.

***The purpose of Amendment 0001 to W912BU26BA015 is to extend the offer due date to 26 May 2026, 2:00PM EDT.*** This is a combined synopsis/solicitation for commercial products prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number W912BU26BA015 is issued as an Invitation for Bid (IFB) for one new steel derrickboat for the Army Corps of Engineers, Norfolk District, for use in support of its various missions in accordance with all specifications. This acquisition is set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The principal dimensions of the derrickboat shall be as follows: Length Overall (Molded) 105 ft, Beam (Molded) 30 ft, Beam (w/ pipe fendering) 30 ft 10.75 in, Hull Depth Amidships (Molded) 8 ft, Draft Amidship (Full Load with 70,000 lb deck cargo) 5 ft, Total Propulsion Power at Continuous Rating 1000-BHP, Maximum Fuel Capacity 2,878 gallons. There will be liquidated damages associated with this procurement. Bid guarantee, payment, and performance bonding are required. NAICS code is 336611; Ship Building and Repair. BASIS FOR SELECTION OF AWARD: Award shall be made to the lowest-priced bidder who is determined to be responsive and responsible. BID SUBMISSION: Offerors shall submit their bid no later than 1400 EDT on 25 May 2026 as follows: The Offerors bid shall be submitted electronically via Procurement Integrated Enterprise Environment (PIEE), as described below. The Offerors bid shall not contain classified data. The use of hyperlinks in bids is prohibited. NOTE: The only authorized transmission method to this solicitation is electronically via PIEE Solicitation Module online submission. NO OTHER TRANSMISSION METHODS (EMAIL, FACSIMILIE, REGULAR MAIL, HANDCARRIED, ETC.,) WILL BE ACCEPTED. ADDITIONAL INFORMATION: Specific information pertaining to this procurement is available in the Solicitation. The Solicitation documents are posted on the SAM.gov website. It is, and will continue to be, the responsibility of all potential bidders to monitor the SAM.gov and PIEE websites for any amendments, updates, responses to industry questions/comments, etc. The Government will not be maintaining a mailing list. POINT-OF-CONTACT: The Primary Contract Specialist for this Solicitation is Katie Sayers at katie.l.sayers@usace.army.mil. Any communication regarding this notice should be made in writing sent via email and must identify the Solicitation number, company name, address, phone number and point of contact.

This is a combined synopsis/solicitation for commercial products prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number W912BU26BA015 is issued as an Invitation for Bid (IFB) for one new steel derrickboat for the Army Corps of Engineers, Norfolk District, for use in support of its various missions in accordance with all specifications. This acquisition is set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The principal dimensions of the derrickboat shall be as follows: Length Overall (Molded) 105 ft, Beam (Molded) 30 ft, Beam (w/ pipe fendering) 30 ft 10.75 in, Hull Depth Amidships (Molded) 8 ft, Draft Amidship (Full Load with 70,000 lb deck cargo) 5 ft, Total Propulsion Power at Continuous Rating 1000-BHP, Maximum Fuel Capacity 2,878 gallons. There will be liquidated damages associated with this procurement. Bid guarantee, payment, and performance bonding are required. NAICS code is 336611; Ship Building and Repair. BASIS FOR SELECTION OF AWARD: Award shall be made to the lowest-priced bidder who is determined to be responsive and responsible. BID SUBMISSION: Offerors shall submit their bid no later than 1400 EDT on 25 May 2026 as follows: The Offerors bid shall be submitted electronically via Procurement Integrated Enterprise Environment (PIEE), as described below. The Offerors bid shall not contain classified data. The use of hyperlinks in bids is prohibited. NOTE: The only authorized transmission method to this solicitation is electronically via PIEE Solicitation Module online submission. NO OTHER TRANSMISSION METHODS (EMAIL, FACSIMILIE, REGULAR MAIL, HANDCARRIED, ETC.,) WILL BE ACCEPTED. ADDITIONAL INFORMATION: Specific information pertaining to this procurement is available in the Solicitation. The Solicitation documents are posted on the SAM.gov website. It is, and will continue to be, the responsibility of all potential bidders to monitor the SAM.gov and PIEE websites for any amendments, updates, responses to industry questions/comments, etc. The Government will not be maintaining a mailing list. POINT-OF-CONTACT: The Primary Contract Specialist for this Solicitation is Katie Sayers at katie.l.sayers@usace.army.mil. Any communication regarding this notice should be made in writing sent via email and must identify the Solicitation number, company name, address, phone number and point of contact.