2 month rental for M280 AM builds
Closed Special Notice Posted
- Solicitation number
- 80NSSC25909096Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 561990 All Other Support Services
- PSC
- AJ12 General Science And Technology R&D Services; General Science And Technology; Applied Research
- Place of performance
- Cleveland, Ohio 44135, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center (NSSC) published a Special Notice seeking a 2-month rental of M280 AM (additive manufacturing) builds for research and development purposes. The procurement is structured as a sole source contract intended for North American Manufacturing Pros LLC, located in Ardmore, Alabama, under FAR 13.106-1(b)(1)(i) authority. NASA has determined that North American Manufacturing Pros LLC is the sole provider capable of delivering the required M280 AM builds services. The work will be performed at NASA Glenn Research Center (GRC) and is classified under NAICS code 561990 for support services. The government intends to acquire these commercial items and services using FAR Part 12 and Part 13 provisions and procedures.
The purpose of this procurement is to support an additive manufacturing research project where the contractor will use NASA-supplied coated metal powders to print specified blocks on an EOS M280 3D printer over a two-month period. The alloys involved are considered intellectual property under a provisional patent, and the contractor must safeguard design files and remaining alloy powders. Interested organizations may submit written capabilities and qualifications by 4:00 p.m. Central Standard Time on July 15, 2025, though oral communications are not acceptable. NASA will evaluate submissions solely to determine whether to conduct the procurement on a competitive basis, with the final decision remaining at the government's discretion. The project focuses on additively manufactured metal components with specific dimensional requirements, representing a research and development effort in advanced manufacturing technologies.
Notice text
NASA/NSSC has a requirement for 2 month rental for M280 AM buildS.
NASA/NSSC intends to issue a sole source contract to NORTH AMERICAN MANUFACTURING PROS
LLC, 29176 Al Highway 53, Ardmore, Alabama 35739-8716 under the authority of FAR 13.106-1(b)(1)(i). It
has been determined that NORTH AMERICAN MANUFACTURING PROS LLC is the sole provider of 2
month rental for M280 AM buildS.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn
Research Center (GRC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures
prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 561990.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the
identified point of contact not later than 4:00 p.m. Central Standard Time on 7/15/2025. Such
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the
government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be
found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Files
| File | Type | Posted |
|---|---|---|
| SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| ComposiCAD Gold 4 axes | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| Assessment of Residual Stress in Ultrasonically Welded Single Lap Shear Coupons as a function of material crystallinity | Shared Services Center | No set-aside | |
| NASA NIOC Engineering Services | Shared Services Center | No set-aside | |
| High-precision X-ray beamline slits for integration into a custom-built X-ray reflectometer system | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity